Add office photos
Filter interviews by
Br.CAT International Interview Questions, Process, and Tips
Top Br.CAT International Interview Questions and Answers
- Q1. How to work in oil unitasked in ITI Electrician interview
- Q2. What is contents of wps and pqrasked in QC Welding Inspector interview
- Q3. What is out put of transmitterasked in Instrument Maintenance Technician interview
Br.CAT International Interview Experiences
9 interviews found
Anonymous
(5 Questions)
- Q1. How to calculate elbow center?
- Q2. How to read isometric drowing.
- Q3. How many type of valves?
- Q4. How many type of gasket?
- Q5. What all material standards code as per AMST?
Piping Foreman Interview Questions asked at other Companies
Selected
I applied via Walk-in and was interviewed in Mar 2024. There was 1 interview round.
Awareness about accident/ Awareness about Lsr
Interview Preparation Tips
HSE Officer Interview Questions asked at other Companies
Selected
I was interviewed in Dec 2022.
(2 Questions)
- Q1. All question painal Trey conduit trunking light MCB box plating fabricator
- Q2. MCB DP isolator all job
Interview Preparation Tips
Electrician Technician Interview Questions asked at other Companies
I applied via Company Website and was interviewed in Sep 2022. There were 2 interview rounds.
(10 Questions)
- Q1. Cebal. Gleand termination
- Q2. ESD. Panel. And DC's. Panel and fild work jb glending cebal dressing and install the transmitter lt pt tt et
- Q3. I no the all instrument work
- Q4. In side panel dressings and termination
- Ans.
In side panel dressings and termination
Side panel dressings refer to the coverings or enclosures on the sides of electrical panels.
Termination refers to the process of connecting electrical wires or cables to the appropriate terminals or connectors.
Proper side panel dressings and termination are essential for safety and to ensure efficient electrical connections.
Examples of side panel dressings include metal or plastic...
- Q5. Hwo to work in control room
- Ans.
First raneeng the cebal put the tage namber after put the glend remove insulation and put the ferool
- Q6. How to work in oil unit
- Ans.
Working in an oil unit requires knowledge of electrical systems, safety protocols, and equipment maintenance.
Understand the electrical systems used in oil units
Follow safety protocols to prevent accidents and injuries
Perform regular maintenance on equipment to ensure proper functioning
Be aware of potential hazards such as flammable materials and high-pressure systems
Communicate effectively with other workers to coordin...
- Q7. Woh to termination control panel
- Ans.
Termination control panel is used to connect and disconnect electrical circuits.
It is used to terminate electrical connections in a control panel
It helps in connecting and disconnecting electrical circuits
It is an important component in electrical installations
- Q8. How to work plc panel
- Ans.
PLC panel is operated by programming the logic controller to control the electrical components.
Understand the logic of the system and program the PLC accordingly
Connect the input and output devices to the PLC panel
Test the system to ensure proper functioning
Regular maintenance and troubleshooting of the panel
Examples of PLC panels include conveyor systems, assembly lines, and HVAC systems
- Q9. How to install trancemiter
- Ans.
To install a transmitter, follow these steps
Choose a suitable location for the transmitter
Mount the transmitter securely
Connect the power supply to the transmitter
Connect the transmitter to the device it will be transmitting to
Configure the transmitter settings as required
- Q10. How to install cebal
- Ans.
CEBAL is not a term commonly used in the electrical field. Please provide more context or clarification.
Interview Preparation Tips
- Instrumentation
- Electrical Works
- Control room
- Oil unit
Top Br.CAT International ITI Electrician Interview Questions and Answers
ITI Electrician Interview Questions asked at other Companies
Br.CAT International interview questions for popular designations
Selected
I applied via Recruitment Consulltant and was interviewed before Apr 2022. There were 2 interview rounds.
(3 Questions)
- Q1. Related to Aramco and International standards.
- Q2. Related to site experience.
- Q3. Related to documentation requirement.
Interview Preparation Tips
Food, accomodation and salary is not upto the market.
(1 Question)
- Q1. Asking questions only about cables and gauges
(1 Question)
- Q1. What is out put of transmitter
- Ans.
The output of a transmitter is an electrical signal that carries information about a physical quantity being measured.
The output can be analog or digital.
Analog output is a continuous signal that varies in voltage or current.
Digital output is a discrete signal that represents the measured quantity in binary code.
Examples of physical quantities that can be measured include temperature, pressure, flow rate, and level.
The...
Interview Preparation Tips
Instrument Maintenance Technician Interview Questions asked at other Companies
I applied via Company Website and was interviewed in Oct 2021. There were 3 interview rounds.
(3 Questions)
- Q1. What is contents of wps and pqr
- Ans.
WPS (Welding Procedure Specification) and PQR (Procedure Qualification Record) are documents that provide detailed instructions for welding processes.
WPS outlines the welding process, materials, and techniques to be used for a specific welding job
PQR documents the results of a test weld and provides proof that the welding process is capable of producing a sound weld
Both documents are essential for ensuring the quality ...
- Q2. How is welder rejection rate calculated
- Ans.
Welder rejection rate is calculated by dividing the number of rejected welds by the total number of welds and multiplying by 100.
Count the number of rejected welds
Count the total number of welds
Divide the number of rejected welds by the total number of welds
Multiply the result by 100 to get the percentage of rejected welds
- Q3. Questions on ASME section IX
(1 Question)
- Q1. Asked about previous experience , previous employment Salary
Interview Preparation Tips
QC Welding Inspector Interview Questions asked at other Companies
I applied via Company Website and was interviewed in Oct 2020. There was 1 interview round.
Interview Questionnaire
8 Questions
- Q1. Sar ined br cat company
- Q2. I worked one time
- Q3. Posebl sar
- Q4. I worked evryething
- Q5. This worked i lik
- Q6. Befor i werked saply companye
- Q7. Not god company
- Q8. I se br cat god compny
Interview Preparation Tips
Rigger Interview Questions asked at other Companies
I applied via Company Website and was interviewed before Oct 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. What is hot tie- in? how it's work?
- Ans.
Hot tie-in is a method of connecting a new pipeline to an existing one while it is still in operation.
Hot tie-in is used to avoid shutting down the existing pipeline, which can be costly and time-consuming.
The process involves welding a new section of pipeline onto the existing one while it is still carrying fluid or gas.
Specialized equipment and safety measures are required to ensure the process is carried out safely.
...
Interview Preparation Tips
Mechanical Engineer Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
Selected
I applied via campus placement at National Institute of Technology (NIT), Calicut and was interviewed in Nov 2024. There were 2 interview rounds.
"I applied via campus placement First round was an aptitude containing quant,english, logical reasoning and data interpretation (60 mins ,60 questions) plus technical round (30 mins,30 questions) conducted via Aon platform. Aptitude was easy but was a bit lengthy. Technical test was also moderate and covered all topics from mechanical core. After the written test there was a resume shortlisting for people who cleared round one.Prepare ur resume according to the role ur applying. From around 87 members 27 were shortlisted for GD round. ."
They divided us into 4 groups and group discussion went on for around 20 mins my topic was (Are ev vehicle's an efficient solution for pollution). In gd round listen to the topic carefully. Don't hesitate to put ur thoughts first donot interfere while other is speaking listen to them and put ur thoughts in a politeful way , mostly stick to the topic. After 20 mins the recruiters asked me to summarise the topic and i gave a brief summary keeping everyone's and my thoughts in mind. After GD 9 members were selected for the interview.Gd and interview happened on the same day.
Interview Preparation Tips
Br.CAT International Interview FAQs
Tell us how to improve this page.
Br.CAT International Interviews By Designations
- Br.CAT International Electrician Technician Interview Questions
- Br.CAT International HSE Officer Interview Questions
- Br.CAT International Instrument Maintenance Technician Interview Questions
- Br.CAT International ITI Electrician Interview Questions
- Br.CAT International Mechanical Engineer Interview Questions
- Br.CAT International Piping Foreman Interview Questions
- Br.CAT International QC Piping Inspector Interview Questions
- Br.CAT International QC Welding Inspector Interview Questions
- Show more
Interview Questions for Popular Designations
- Software Engineer Interview Questions
- Intern Interview Questions
- Senior Associate Interview Questions
- Sales Executive Interview Questions
- Graduate Engineer Trainee (Get) Interview Questions
- Associate Software Engineer Interview Questions
- Java Developer Interview Questions
- Senior Software Engineer Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Br.CAT International Reviews and Ratings
based on 96 reviews
Rating in categories
|
Safety Officer
11
salaries
|  ₹0.7 L/yr - ₹4.4 L/yr |
|
QC Inspector
7
salaries
| ₹11 L/yr - ₹20 L/yr |
|
HSE Officer
6
salaries
| ₹6.3 L/yr - ₹12.9 L/yr |
|
QA QC Welding Inspector
5
salaries
| ₹17.9 L/yr - ₹20 L/yr |
|
QC Welding Inspector
5
salaries
| ₹19 L/yr - ₹24 L/yr |
Tata Group
Reliance Industries
Adani Group
Mahindra & Mahindra
Calculate your in-hand salary
- Home >
- Interviews >
- Br.CAT International Interview Questions
