AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Fiem Industries Interview Questions and Answers
9 Interview questions
The rejection control of the moulding machine is typically located on the control panel.
The rejection control is usually a button or switch on the control panel.
It may be labeled as 'reject' or 'scrap'.
The control allows the operator to manually reject any defective parts produced by the machine.
Some machines may also have an automatic rejection system that is programmed to detect and remove defective parts.
The lo...
To resolve the issue, identify the root cause, develop a plan, and implement solutions.
Identify the root cause of the issue
Develop a plan to address the issue
Implement solutions based on the plan
Monitor and evaluate the effectiveness of the solutions
Make necessary adjustments if needed
To close customer complaints, actively listen to their concerns, empathize with their frustrations, offer a solution or compensation, and follow up to ensure satisfaction.
Listen attentively to the customer's complaint
Empathize with their frustrations and acknowledge their feelings
Offer a solution or compensation to resolve the issue
Follow up with the customer to ensure their satisfaction
Injection moulding machine is located in the production area and problem solving involves identifying and resolving issues with the machine and the moulds.
Injection moulding machine is typically located in the production area
Problem solving involves identifying and resolving issues with the machine and the moulds
Common problems include issues with the temperature, pressure, and material flow
Solutions may involve a...
A series of questions related to accounting and taxation.
TDS types, rates, and sections must be known for accurate tax calculations.
Criteria for checking points before booking expenses must be established to ensure accuracy.
Working capital refers to the funds a company has available for day-to-day operations.
Provision is an amount set aside for a specific purpose, such as bad debt or warranty claims.
Depreciation c...
Types of injection molding machines include hydraulic, electric, and hybrid machines.
Hydraulic injection molding machines use hydraulic systems to generate the necessary pressure for the injection process.
Electric injection molding machines are more energy efficient and precise compared to hydraulic machines.
Hybrid injection molding machines combine the benefits of both hydraulic and electric machines.
Examples: Ar...
Automobile testing requirements ensure safety, performance, and compliance with regulations.
Testing includes crash tests, emissions tests, and durability tests.
Regulations vary by country and may include safety standards, fuel efficiency requirements, and emissions limits.
Testing is conducted throughout the development process, from initial design to final production.
Automakers may also conduct their own internal ...
MTTR reduction can lead to an increase in MTBF, aligning with management KPI targets.
Reducing Mean Time To Repair (MTTR) can result in less downtime for equipment, leading to longer Mean Time Between Failures (MTBF).
Improving maintenance processes, training staff, and using predictive maintenance techniques can help reduce MTTR.
Increasing MTBF can indicate improved reliability and performance of equipment, meeting...
Yes, all areas have safety measures implemented to ensure a safe working environment for all employees.
Regular safety inspections are conducted to identify and address any potential hazards.
Safety protocols and procedures are clearly communicated to all employees.
Personal protective equipment (PPE) is provided and enforced for all necessary tasks.
Emergency response plans are in place and regularly practiced.
Safety...
Fiem Industries Interview Experiences
24 interviews found
Selected
I applied via Approached by Company and was interviewed in Aug 2024. There was 1 interview round.
(5 Questions)
- Q1. MTTR reduced MTBF increase as per our management KPI target
- Ans.
MTTR reduction can lead to an increase in MTBF, aligning with management KPI targets.
Reducing Mean Time To Repair (MTTR) can result in less downtime for equipment, leading to longer Mean Time Between Failures (MTBF).
Improving maintenance processes, training staff, and using predictive maintenance techniques can help reduce MTTR.
Increasing MTBF can indicate improved reliability and performance of equipment, meeting mana...
- Q2. Reactive and proactive maintenance Injection molding machine and utility ,TPM , Kaizen,all documents i will maintain,
- Q3. More than 3 hrs or repeated breakdown i will take 8D
- Q4. Saving project yearly 4 nos
- Ans.
Implementing energy-saving projects can lead to significant cost reductions and environmental benefits.
Identify areas where energy consumption can be reduced, such as upgrading to energy-efficient equipment or implementing automation systems.
Calculate the potential savings from each project and prioritize based on cost-effectiveness.
Monitor and track the energy usage before and after implementing the projects to measur...
- Q5. All areas Safety implemented
- Ans.
Yes, all areas have safety measures implemented to ensure a safe working environment for all employees.
Regular safety inspections are conducted to identify and address any potential hazards.
Safety protocols and procedures are clearly communicated to all employees.
Personal protective equipment (PPE) is provided and enforced for all necessary tasks.
Emergency response plans are in place and regularly practiced.
Safety trai...
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Jul 2024. There were 3 interview rounds.
(2 Questions)
- Q1. Quality core tools
- Q2. Customer interaction
(2 Questions)
- Q1. Knowledge about Quality tools
- Q2. Root cause analysis
(2 Questions)
- Q1. Salary discussion
- Q2. Company policy & benifits
I appeared for an interview in Dec 2024.
About company policy
(1 Question)
- Q1. Based on sellery
(1 Question)
- Q1. Technical questions
(1 Question)
- Q1. Injection Molding process
Quality Assurance Quality Control Engineer Interview Questions & Answers
Anonymous
posted on 15 Aug 2024
(1 Question)
- Q1. Filled Ipcs poka yoke
I applied via Walk-in and was interviewed in Jul 2023. There were 3 interview rounds.
(1 Question)
- Q1. What about your self
- Ans.
I am a dedicated Production Engineer with a passion for optimizing processes and enhancing efficiency in manufacturing environments.
Educational Background: I hold a degree in Mechanical Engineering from XYZ University, where I graduated with honors.
Professional Experience: I have over 5 years of experience in the manufacturing sector, working with ABC Company to streamline production processes.
Technical Skills: Profici...
(3 Questions)
- Q1. After company which your responsibility
- Q2. Machine process and material grade and melting temperature
- Q3. Types of injection molding machine
- Ans.
Types of injection molding machines include hydraulic, electric, and hybrid machines.
Hydraulic injection molding machines use hydraulic systems to generate the necessary pressure for the injection process.
Electric injection molding machines are more energy efficient and precise compared to hydraulic machines.
Hybrid injection molding machines combine the benefits of both hydraulic and electric machines.
Examples: Arburg ...
Selected
I appeared for an interview before Feb 2024.
(2 Questions)
- Q1. Why do you want to leave existing company
- Ans.
Seeking new challenges and growth opportunities
Looking for career advancement
Interested in exploring new industries or sectors
Seeking a more supportive or collaborative work environment
Want to work for a company with a better work-life balance
Desire to learn new skills or take on more responsibilities
- Q2. CTC expectation
Interview Preparation Tips
Selected
I appeared for an interview before Dec 2023, where I was asked the following questions.
- Q1. Can you tell me about yourself?
- Q2. Can you describe your job responsibilities in your previous company?
- Q3. What are your skills related to quality assurance?
- Q4. What are all the
Selected
I appeared for an interview before Apr 2024, where I was asked the following questions.
- Q1. How many days you will work with us..??
- Q2. Are you sure, will you join us
Selected
I applied via Company Website and was interviewed before Jan 2024. There were 2 interview rounds.
(1 Question)
- Q1. Production and QC
(2 Questions)
- Q1. Production and Qty and QC
- Q2. Production line
Interview Preparation Tips
Top trending discussions
Fiem Industries Interview FAQs
The duration of Fiem Industries interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Fiem Industries Interviews By Designations
- Fiem Industries Production Engineer Interview Questions
- Fiem Industries Senior Engineer Interview Questions
- Fiem Industries Assistant Manager Interview Questions
- Fiem Industries Engineer Interview Questions
- Fiem Industries Marketing Manager Interview Questions
- Fiem Industries Quality Engineer Interview Questions
- Fiem Industries HR Manager Interview Questions
- Fiem Industries Senior Accounts Executive Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 35 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Fiem Industries Reviews and Ratings
based on 548 reviews
Rating in categories
|
Engineer
185
salaries
|  ₹2.2 L/yr - ₹6.2 L/yr |
|
Assistant Manager
160
salaries
| ₹5.3 L/yr - ₹10.8 L/yr |
|
Quality Engineer
115
salaries
| ₹2 L/yr - ₹5.5 L/yr |
|
Senior Engineer
97
salaries
| ₹3.9 L/yr - ₹8.4 L/yr |
|
Production Engineer
87
salaries
| ₹2.2 L/yr - ₹7 L/yr |
Bosch
Samvardhana Motherson Group
MRF Tyres
Ceat Tyres
- Home >
- Interviews >
- Fiem Industries Interview Questions
