Add office photos
Engaged Employer

Hyundai Motor India Limited

4.4
based on 3.6k Reviews
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by

100+ Interview Questions and Answers

Updated 18 Nov 2024

Q1. How you will deal a Customer when our service regarding his car was poor and he doesn't want to come back in the workshop?

Ans.

I would apologize for the poor service and offer to make it right by sending a technician to the customer's location.

  • Apologize sincerely for the poor service

  • Offer to send a technician to the customer's location to fix the issue

  • Assure the customer that their satisfaction is a top priority

  • Provide a discount or compensation for the inconvenience caused

  • Follow up with the customer to ensure their issue has been resolved

View 7 more answers

Q2. What is the runout allowance of the reamer and drill & brief?

Ans.

The runout allowance of a reamer and drill refers to the acceptable amount of deviation from perfect alignment during operation.

  • Runout allowance is a measure of how much the cutting edge of the tool can deviate from the desired path.

  • It is important to have a small runout allowance to ensure accurate and precise machining.

  • The runout allowance can vary depending on the specific application and the tolerance requirements.

  • For example, in high-precision machining, the runout allow...read more

View 1 answer

Q3. How to do your zero safety issues

Ans.

To achieve zero safety issues, implement a comprehensive safety program, prioritize safety training, enforce safety protocols, conduct regular inspections, and encourage a safety culture.

  • Implement a comprehensive safety program that includes policies, procedures, and guidelines.

  • Prioritize safety training for all employees to ensure they are aware of potential hazards and know how to mitigate them.

  • Enforce safety protocols strictly, including the use of personal protective equi...read more

View 6 more answers

Q4. What is quality

Ans.

Quality is the measure of excellence or superiority of a product or service.

  • Quality is the degree to which a product or service meets or exceeds customer expectations.

  • It involves meeting specified requirements, standards, and specifications.

  • Quality can be measured through various metrics such as defect rate, customer satisfaction, and reliability.

  • Continuous improvement is essential for maintaining and enhancing quality.

  • Examples of quality include a software application that i...read more

View 12 more answers
Discover null interview dos and don'ts from real experiences

Q5. What are the types of sensor?

Ans.

Sensors are devices that detect and respond to physical inputs or environmental conditions.

  • There are various types of sensors such as temperature sensors, pressure sensors, proximity sensors, motion sensors, light sensors, etc.

  • Temperature sensors measure the temperature of an object or environment.

  • Pressure sensors measure the pressure of gases or liquids.

  • Proximity sensors detect the presence or absence of an object within a certain range.

  • Motion sensors detect movement or chan...read more

View 2 more answers

Q6. Daily routine during working days. Day start to end. SAR, Parts per vehicles and labour per vehicles. What challenge you faced. Technical knowledge abour BS6. How you will improve the bodyshop business and deal...

read more
Add your answer
Are these interview questions helpful?

Q7. How to select the pre drill for tap?

Ans.

The pre drill for tap should be selected based on the material being drilled and the size of the tap.

  • Consider the material being drilled: Different materials require different pre drill sizes. So, it is important to know the material before selecting the pre drill.

  • Refer to tap drill charts: Tap drill charts provide recommended pre drill sizes for different tap sizes and materials. These charts can be found in machining handbooks or online.

  • Calculate the pre drill size: In some...read more

View 1 answer

Q8. How to control the roughness issue in grinding?

Ans.

Controlling roughness in grinding involves adjusting parameters, using proper grinding techniques, and maintaining the grinding machine.

  • Adjust grinding parameters such as speed, feed rate, and depth of cut to achieve desired roughness.

  • Use the appropriate grinding wheel with the right grit size and hardness for the material being ground.

  • Ensure the grinding machine is properly maintained and in good condition.

  • Apply coolant or lubricant during grinding to reduce friction and hea...read more

View 1 answer
Share interview questions and help millions of jobseekers 🌟

Q9. Quality control which in the tool use in automotive feal

Ans.

Quality control tools used in automotive field

  • Statistical Process Control (SPC) to monitor and control production processes

  • Failure Mode and Effects Analysis (FMEA) to identify and prevent potential failures

  • Six Sigma methodology to improve quality and reduce defects

  • Lean manufacturing to eliminate waste and improve efficiency

  • Automated inspection systems to detect defects in parts and components

View 4 more answers

Q10. Excel and MLA full form and explain asali and Emily

Ans.

Excel is a spreadsheet program used for data analysis and MLA stands for Modern Language Association.

  • Excel is a software application developed by Microsoft that allows users to create, organize, and analyze data using spreadsheets.

  • MLA is a style guide used for writing and documenting research papers in the fields of humanities and liberal arts.

  • ASALI and Emily are not related to Excel or MLA. It seems like there might be a misunderstanding or miscommunication in the question.

View 1 answer

Q11. Do you have basic computer knowledge?

Ans.

Yes, I have basic computer knowledge.

  • Proficient in using Microsoft Office Suite

  • Familiar with email and internet usage

  • Able to troubleshoot common computer issues

  • Experience with customer relationship management (CRM) software

View 3 more answers

Q12. How to control the CPC of cutting tools?

Ans.

CPC of cutting tools can be controlled through proper selection of tool material, coatings, cutting parameters, and tool maintenance.

  • Selecting the right tool material based on the workpiece material and cutting conditions

  • Applying appropriate coatings to reduce friction and wear

  • Optimizing cutting parameters such as cutting speed, feed rate, and depth of cut

  • Regularly inspecting and maintaining the cutting tools to ensure sharpness and accuracy

  • Using advanced tool monitoring syst...read more

View 1 answer

Q13. What is the purpose of switch gear?

Ans.

Switchgear is used to control, protect, and isolate electrical equipment in power systems.

  • Switchgear is essential for the safe and reliable operation of electrical systems.

  • It controls the flow of electrical power and protects equipment from overloads, short circuits, and faults.

  • Switchgear isolates faulty equipment or sections of a power system to prevent further damage.

  • It allows for maintenance and repairs to be carried out on specific parts of the system without affecting th...read more

View 3 more answers

Q14. What is the important thing in quality

Ans.

The important thing in quality is meeting customer expectations and delivering a reliable product or service.

  • Meeting customer expectations

  • Delivering a reliable product or service

  • Consistency in performance

  • Continuous improvement

  • Effective communication and collaboration

  • Adherence to standards and processes

View 2 more answers

Q15. What Was Your Last Sallary?

Ans.

I was earning $60,000 annually in my previous role.

  • My last salary was $60,000 per year

  • I received a yearly salary of $60,000 in my previous position

  • My annual salary at my last job was $60,000

View 6 more answers

Q16. How many baking tempreture in the paint both

Ans.

The number of baking temperatures in paint varies depending on the type and application.

  • Different types of paint may require different baking temperatures.

  • Some paints may require a single baking temperature, while others may require multiple temperatures.

  • The baking temperature is determined by factors such as the type of paint, desired finish, and substrate material.

  • Examples of baking temperatures in paint include 120°C, 150°C, and 180°C.

View 1 answer

Q17. How your maintain the inventory?

Ans.

I maintain the inventory by implementing a systematic approach that includes regular audits, accurate record-keeping, and efficient replenishment strategies.

  • Conduct regular audits to ensure accuracy and identify any discrepancies or shortages.

  • Maintain accurate records of inventory levels, including item descriptions, quantities, and locations.

  • Implement efficient replenishment strategies based on demand forecasting and lead times.

  • Utilize inventory management software or tools ...read more

View 1 answer

Q18. What is the engine

Ans.

An engine is a machine that converts fuel into mechanical energy to power a vehicle or machinery.

  • Engines come in various types such as internal combustion, diesel, electric, and hybrid.

  • They are used in cars, trucks, airplanes, boats, and generators.

  • The engine consists of various components such as cylinders, pistons, crankshaft, and camshaft.

  • The engine's power output is measured in horsepower or kilowatts.

  • Regular maintenance is required to keep the engine running efficiently.

View 4 more answers

Q19. In assembly section what problem should came to be analysis

Ans.

The problem that should be analyzed in the assembly section is the identification and resolution of bottlenecks in the production process.

  • Identifying bottlenecks in the assembly line

  • Analyzing production data to determine areas of improvement

  • Implementing process improvements to increase efficiency

  • Troubleshooting equipment malfunctions

  • Ensuring proper training and supervision of assembly workers

View 1 answer

Q20. Types of quality instruments

Ans.

Quality instruments are tools used to measure and monitor the quality of products or processes.

  • Calipers: used to measure dimensions of objects

  • Micrometers: used for precise measurements

  • Gauges: used to check the accuracy of measurements

  • Spectrophotometers: used to measure color and light intensity

  • CMM (Coordinate Measuring Machine): used for dimensional measurements

  • Force gauges: used to measure force or tension

  • Tensiometers: used to measure surface tension of liquids

  • Thermometers: ...read more

View 3 more answers

Q21. What is kizen

Ans.

Kaizen is a Japanese business philosophy that focuses on continuous improvement.

  • Kaizen emphasizes small, incremental changes to improve processes and systems.

  • It involves the participation of all employees in identifying and implementing improvements.

  • Kaizen aims to eliminate waste, increase efficiency, and enhance quality.

  • Examples of kaizen include implementing standardized work procedures, using visual management tools, and conducting regular team meetings to discuss improvem...read more

View 4 more answers

Q22. How many type of 5s

Ans.

There are multiple interpretations of '5s', but commonly it refers to the 5s methodology used in Lean management.

  • 5s methodology is a systematic approach to workplace organization and standardization.

  • It consists of five steps: Sort, Set in Order, Shine, Standardize, and Sustain.

  • Each step focuses on eliminating waste, improving efficiency, and creating a clean and organized work environment.

  • For example, in the 'Sort' step, unnecessary items are removed from the workspace to red...read more

View 4 more answers

Q23. The function of a flow valve is to reduce the rate of flow in its leg of the circuit flow reduction results in speed reduction at the actuator for an example of an actuator.

Ans.

A flow valve reduces flow rate in a circuit, resulting in speed reduction at the actuator.

  • Flow valve is used to control the flow rate of fluid in a hydraulic or pneumatic system.

  • It reduces the flow rate by creating a pressure drop across the valve.

  • This pressure drop results in a decrease in speed of the actuator.

  • Examples of actuators include hydraulic cylinders, pneumatic cylinders, and motors.

Add your answer

Q24. Car assembly process any spec error and missmatch

Ans.

The car assembly process involves identifying and rectifying any specification errors and mismatches.

  • Inspect each component for correct specifications

  • Ensure proper alignment and fitment of parts

  • Verify that all electrical and mechanical connections are accurate

  • Check for any discrepancies in color, texture, or finish

  • Test functionality of various systems and components

View 2 more answers

Q25. What do you know about Automobiles and the industry?

Ans.

I have a good understanding of automobiles and the industry.

  • I am familiar with different types of cars and their features.

  • I keep up-to-date with the latest trends and advancements in the industry.

  • I understand the importance of customer service and building relationships with clients.

  • I have experience in sales and marketing within the automotive industry.

  • I am aware of the competition and how to differentiate our products from others.

Add your answer

Q26. What's mixing ratio of Body filler an hardner

Ans.

The mixing ratio of body filler and hardener varies depending on the specific product being used.

  • The mixing ratio is typically mentioned on the product packaging or in the product instructions.

  • Common mixing ratios range from 2:1 to 4:1, where the first number represents body filler and the second number represents hardener.

  • For example, a mixing ratio of 3:1 means you would mix 3 parts body filler with 1 part hardener.

  • It is important to follow the recommended mixing ratio to e...read more

View 1 answer
Asked in
PDI Interview

Q27. What is stress , strain in strength of the matrial ?

Ans.

Stress and strain are key concepts in the strength of materials, representing the internal forces and deformations experienced by a material under load.

  • Stress is the force applied per unit area on a material, causing it to deform.

  • Strain is the measure of deformation experienced by a material in response to stress.

  • The relationship between stress and strain is described by the material's modulus of elasticity.

  • Stress-strain curves are used to analyze the behavior of materials un...read more

Add your answer

Q28. CC full form and explain

Ans.

CC stands for Carbon Copy, which is a copy of a document made by using carbon paper.

  • CC is used to make a duplicate copy of a document without the need for a photocopier or printer.

  • Carbon paper is placed between the original document and the copy paper, and pressure is applied to transfer the ink.

  • CC is commonly used in offices for making copies of letters, invoices, and other documents.

  • It is also used in art for transferring sketches or designs onto different surfaces.

  • CC can a...read more

View 4 more answers

Q29. Our places cleaning and working safety method

Ans.

Our cleaning and working safety method involves regular cleaning schedules, proper training on safety protocols, and use of personal protective equipment.

  • Regular cleaning schedules to maintain a clean and safe work environment

  • Proper training on safety protocols to prevent accidents and injuries

  • Use of personal protective equipment such as gloves, goggles, and masks

  • Implementation of safety procedures like lockout/tagout for equipment maintenance

  • Regular inspections to identify a...read more

Add your answer

Q30. Explain the Piston rings and function

Ans.

Piston rings are components in an engine that seal the combustion chamber and prevent leakage of gases.

  • Piston rings are circular metal rings that fit into grooves on the outer diameter of the piston.

  • They provide a seal between the piston and the cylinder wall, preventing the combustion gases from leaking into the crankcase.

  • Piston rings also help to regulate the oil distribution on the cylinder walls, ensuring proper lubrication.

  • They assist in transferring heat from the piston...read more

View 1 answer

Q31. What is LED Full form?

Ans.

LED stands for Light Emitting Diode.

  • LED is a semiconductor device that emits light when an electric current passes through it.

  • It is commonly used in various applications such as lighting, displays, and indicators.

  • LEDs are energy-efficient and have a longer lifespan compared to traditional incandescent bulbs.

  • They come in different colors and can be used for decorative purposes as well.

  • Examples of LED applications include LED TVs, LED streetlights, LED traffic signals, and LED ...read more

View 4 more answers

Q32. What is the capacity of diesel and petrol

Ans.

Diesel has higher energy density than petrol, resulting in better fuel efficiency.

  • Diesel has a higher energy density than petrol, meaning it can provide more energy per unit volume.

  • Petrol is more volatile and burns faster than diesel.

  • The capacity of diesel and petrol tanks in vehicles can vary depending on the size of the vehicle and its fuel efficiency.

  • For example, a typical car may have a petrol tank capacity of around 50-70 liters, while a diesel car may have a tank capaci...read more

Add your answer

Q33. How to Workers working conditions

Ans.

Workers working conditions can vary greatly depending on the industry and company policies.

  • Workers may be exposed to hazardous materials or loud noises in some industries.

  • Some companies may offer flexible work hours or remote work options to improve working conditions.

  • Proper safety equipment and training should be provided to ensure a safe working environment.

  • Workers may have access to amenities such as break rooms, cafeterias, or fitness facilities.

  • Regular breaks and ergonom...read more

Add your answer

Q34. How to handel in customer complain ?

Ans.

Handling customer complaints requires active listening, empathy, and a solution-oriented approach.

  • Listen actively and empathetically to the customer's complaint.

  • Apologize for the inconvenience caused and assure the customer that their complaint will be addressed.

  • Ask questions to understand the issue better and gather all necessary information.

  • Offer a solution or alternatives to resolve the issue.

  • Follow up with the customer to ensure their satisfaction and take necessary steps...read more

View 1 answer

Q35. What is the safety

Ans.

Safety refers to the state of being protected from harm, danger, or risk.

  • Safety involves measures and precautions taken to prevent accidents, injuries, or harm.

  • It includes following safety protocols, using protective equipment, and maintaining a safe environment.

  • Examples of safety measures include wearing seat belts while driving, using helmets while cycling, and implementing fire safety procedures in buildings.

View 3 more answers

Q36. What is last proses are paint work

Ans.

The last process in paint work is applying a protective coating.

  • The final step in paint work is the application of a protective coating to ensure durability and longevity.

  • This coating can be a clear varnish, lacquer, or sealant that helps to protect the painted surface from damage, such as scratches, UV rays, and moisture.

  • The protective coating also enhances the appearance of the paint job by adding a glossy or matte finish, depending on the desired look.

  • Examples of protectiv...read more

View 1 answer

Q37. What are the solution on problem in vheicle

Ans.

The solutions to vehicle problems depend on the specific issue, but common solutions include regular maintenance, repairs, and replacements.

  • Regular maintenance can prevent many problems, such as oil changes, tire rotations, and brake inspections.

  • Repairs may be necessary for issues such as engine problems, transmission issues, or electrical malfunctions.

  • Replacements may be needed for parts that wear out over time, such as batteries, tires, or brake pads.

  • Other solutions may inc...read more

Add your answer

Q38. Define tha differential unit working process

Ans.

The differential unit is a component in a vehicle's drivetrain that allows the wheels to rotate at different speeds.

  • The differential unit is typically located in the center of the axle assembly.

  • It consists of a set of gears that distribute torque to the wheels.

  • When a vehicle takes a turn, the outer wheel needs to rotate faster than the inner wheel. The differential unit allows this by allowing the wheels to rotate at different speeds.

  • The differential unit also helps in transf...read more

View 1 answer

Q39. Type of welding in manufacturing

Ans.

There are various types of welding used in manufacturing processes.

  • Arc welding: Uses an electric arc to create heat and join metals.

  • Gas welding: Involves the use of a fuel gas and oxygen to create a flame for welding.

  • Resistance welding: Utilizes the heat generated by resistance to electric current to join metals.

  • TIG welding: Uses a non-consumable tungsten electrode to produce the weld.

  • MIG welding: Involves the use of a consumable wire electrode and a shielding gas.

  • Spot weldin...read more

View 3 more answers

Q40. What is your customer service ?

Ans.

Our customer service is exceptional, providing timely and effective solutions to all customer queries and concerns.

  • We prioritize customer satisfaction above all else

  • We have a team of highly trained and empathetic customer service representatives

  • We use various communication channels to ensure prompt and efficient service

  • We constantly gather feedback to improve our service

  • We go above and beyond to exceed customer expectations

  • For example, we offer personalized solutions and foll...read more

Add your answer

Q41. Why we using series parallel connection in automobile

Ans.

Series parallel connection in automobiles allows for efficient power distribution and redundancy.

  • Series connection allows for higher voltage output, which is needed for certain components like headlights.

  • Parallel connection ensures redundancy and reliability in case one component fails.

  • Combining series and parallel connections optimizes power distribution in automobiles.

  • Example: Series connection for battery cells, parallel connection for headlights.

Add your answer

Q42. Why use diode in rectifier?

Ans.

Diodes are used in rectifiers to convert alternating current (AC) to direct current (DC).

  • Diodes allow current to flow in only one direction, blocking the reverse flow.

  • They help in converting the negative half cycles of AC to positive half cycles of DC.

  • Diodes prevent the loss of power that occurs in AC circuits due to negative half cycles.

  • They are essential components in power supplies, battery chargers, and electronic devices.

  • Examples of rectifier circuits using diodes includ...read more

View 2 more answers

Q43. What are like that in Hyundai

Ans.

Hyundai is a leading automobile manufacturer known for its innovative technology and high-quality production.

  • Hyundai is known for its advanced manufacturing processes and automation.

  • They have a strong focus on quality control and continuous improvement.

  • Hyundai invests heavily in research and development to stay at the forefront of automotive technology.

  • They have a wide range of production facilities and a global supply chain.

  • Hyundai emphasizes sustainability and eco-friendly ...read more

View 2 more answers

Q44. What is function of boost pressure sensor

Ans.

The boost pressure sensor measures the pressure of the air entering the engine to ensure optimal performance.

  • Measures pressure of air entering engine

  • Helps ensure optimal engine performance

  • Sends data to engine control unit for adjustments

  • Commonly found in turbocharged engines

View 1 answer

Q45. Difference between petrol engine and diesel engine?

Ans.

Petrol engines use spark plugs to ignite fuel, while diesel engines use compression to ignite fuel.

  • Petrol engines use spark plugs to ignite the fuel-air mixture, while diesel engines rely on compression to ignite the fuel.

  • Petrol engines are generally lighter and more responsive, while diesel engines are more fuel efficient and have higher torque.

  • Petrol engines are more common in cars and motorcycles, while diesel engines are often found in trucks and heavy machinery.

View 1 answer

Q46. SAE full form and explain

Ans.

SAE stands for Society of Automotive Engineers, a global organization that develops standards for the automotive industry.

  • SAE is a professional organization that was founded in 1905 and has over 138,000 members worldwide.

  • SAE develops standards for the automotive, aerospace, and commercial vehicle industries.

  • Examples of SAE standards include specifications for engine oil, fuel, and hydraulic fluids.

  • SAE also hosts events and competitions for engineering students, such as the Fo...read more

View 2 more answers

Q47. What is meant by wet sanding

Ans.

Wet sanding is a technique used in construction and woodworking to smooth surfaces using water and abrasive materials.

  • Wet sanding involves wetting the surface being sanded and using wet sandpaper or abrasive pads.

  • Water helps to lubricate the surface and prevent dust from becoming airborne.

  • It is commonly used to smooth drywall, wood, and automotive finishes.

  • Wet sanding can be done by hand or with the help of power tools like sanders or polishers.

  • The process gradually removes i...read more

View 1 answer

Q48. How many type of tag

Ans.

There are various types of tags used in different contexts such as HTML, XML, and social media.

Add your answer

Q49. What is the firing order of 4 cylinder engine??

Ans.

The firing order of a 4 cylinder engine is typically 1-3-4-2.

  • The firing order refers to the sequence in which each cylinder in the engine fires.

  • In a 4 cylinder engine, the firing order is usually 1-3-4-2.

  • This means that cylinder 1 fires first, followed by cylinder 3, then cylinder 4, and finally cylinder 2.

Add your answer

Q50. Shift starting before safety meating coundent?

Ans.

Shift should not start before safety meeting is conducted to ensure all employees are aware of safety protocols and procedures.

  • Safety meetings are important to discuss any potential hazards, review safety procedures, and ensure all employees are aware of safety protocols.

  • Starting a shift before a safety meeting could lead to employees being unaware of important safety information, increasing the risk of accidents or injuries.

  • It is important for all employees to attend safety ...read more

Add your answer

Q51. What is your quality inspection in ok line

Ans.

My quality inspection in the OK line involves checking products for defects and ensuring they meet quality standards before they are approved for shipment.

  • Inspecting products for defects such as scratches, dents, or misalignments

  • Checking measurements and specifications to ensure they meet quality standards

  • Verifying proper labeling and packaging of products

  • Documenting any issues found and reporting them to the appropriate personnel

  • Ensuring all products pass inspection before b...read more

View 1 answer

Q52. How to handel the customer ?

Ans.

Handling customers requires active listening, empathy, and problem-solving skills.

  • Listen actively to the customer's concerns and needs.

  • Show empathy and understanding towards the customer's situation.

  • Use problem-solving skills to find a solution that meets the customer's needs.

  • Communicate clearly and effectively with the customer.

  • Follow up with the customer to ensure their satisfaction.

Add your answer

Q53. Difference b/w petrol engine & diesel engine

Ans.

Petrol engines use spark ignition, while diesel engines use compression ignition.

  • Petrol engines use a spark plug to ignite the fuel-air mixture, while diesel engines rely on compression to ignite the fuel.

  • Petrol engines are lighter and more responsive, while diesel engines are more fuel-efficient and have higher torque.

  • Petrol engines are more common in cars and motorcycles, while diesel engines are often used in trucks, buses, and heavy machinery.

Add your answer

Q54. Machine safety and tools requirements

Ans.

Machine safety and tools requirements are essential for ensuring a safe working environment for assembly workers.

  • Always wear appropriate personal protective equipment (PPE) such as gloves, safety glasses, and steel-toed boots.

  • Follow all safety guidelines and procedures provided by the company.

  • Regularly inspect and maintain tools and equipment to ensure they are in good working condition.

  • Attend training sessions on machine safety and proper tool usage.

  • Report any safety hazards...read more

Add your answer

Q55. Progress for working conditions

Ans.

Progress for working conditions is essential for the well-being and productivity of assembly workers.

  • Improving safety measures such as providing proper training and equipment

  • Implementing ergonomic workstations to prevent injuries and strain

  • Ensuring fair wages and benefits for assembly workers

  • Creating a supportive work environment with open communication channels

  • Regularly reviewing and updating policies to address any issues or concerns

Add your answer

Q56. Vernier caliper list count

Ans.

The Vernier caliper is used to measure the length, width, and thickness of objects with high precision.

  • Vernier caliper is a measuring instrument with two scales - main scale and Vernier scale.

  • To measure an object, align it between the jaws of the caliper and read the measurement from the scales.

  • The main scale provides the whole number measurement, while the Vernier scale provides the fractional measurement.

  • The count on the Vernier scale indicates the number of divisions it ha...read more

View 1 answer

Q57. What difference conductor & semi conductor...?

Ans.

Conductors allow electricity to flow easily, while semiconductors have a conductivity between that of conductors and insulators.

  • Conductors have high conductivity and allow electricity to flow easily.

  • Semiconductors have moderate conductivity, between that of conductors and insulators.

  • Conductors include metals like copper and aluminum.

  • Semiconductors include materials like silicon and germanium.

  • Semiconductors are used in electronic devices like transistors and diodes.

Add your answer

Q58. What is FMEA which in the purpose used

Ans.

FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identify and prevent potential failures in a product or process.

  • FMEA is used to identify potential failures in a product or process and their effects on the system.

  • It helps in prioritizing the failures based on their severity, occurrence, and detectability.

  • FMEA is used in various industries such as automotive, aerospace, healthcare, and manufacturing.

  • It involves a team of experts who analyze the...read more

Add your answer

Q59. Wich plant experience in mobis

Ans.

I have experience working at the Mobis plant in XYZ city.

  • Worked as a Quality Engineer at the Mobis plant for 3 years

  • Implemented quality control measures to ensure product standards were met

  • Collaborated with cross-functional teams to identify and resolve quality issues

  • Conducted regular audits and inspections to maintain quality standards

  • Implemented process improvements to enhance efficiency and reduce defects

  • Trained and mentored new quality engineers in plant procedures and pr...read more

View 1 answer

Q60. How to fix a problem and plan for countermeasures

Ans.

To fix a problem and plan for countermeasures, identify the root cause, brainstorm solutions, prioritize and implement the best solution, and monitor for effectiveness.

  • Identify the root cause of the problem through data analysis and observation

  • Brainstorm potential solutions with a team or individually

  • Prioritize the solutions based on feasibility, impact, and cost

  • Implement the best solution and monitor for effectiveness

  • Create a plan for countermeasures to prevent the problem f...read more

Add your answer

Q61. What are 4 strokes & working of engine?

Ans.

Four strokes in an engine are intake, compression, power, and exhaust. These strokes work together to generate power in an internal combustion engine.

  • Intake stroke: Fuel and air mixture is drawn into the cylinder.

  • Compression stroke: The mixture is compressed by the piston.

  • Power stroke: The spark plug ignites the mixture, causing an explosion that drives the piston down.

  • Exhaust stroke: The piston pushes the exhaust gases out of the cylinder.

Add your answer

Q62. Different types of transformer & transformer function...?

Ans.

Transformers are devices that transfer electrical energy between two or more circuits through electromagnetic induction.

  • Types of transformers include power transformers, distribution transformers, instrument transformers, and autotransformers.

  • Power transformers are used in power generation and transmission to step up or step down voltage levels.

  • Distribution transformers are used to supply power to residential and commercial areas at lower voltage levels.

  • Instrument transformer...read more

Add your answer

Q63. How to vheicle codinates ?

Ans.

Vehicle coordinates can be obtained through GPS or mapping software.

  • GPS technology can provide real-time vehicle coordinates

  • Mapping software can display vehicle coordinates on a map

  • Vehicle tracking systems can also provide coordinates

  • Coordinates can be used to track vehicle location and optimize routes

View 1 answer

Q64. What do you know about the motor line?

Ans.

The motor line refers to a range of products related to motors and motor vehicles.

  • The motor line includes products such as engines, transmissions, and other components for vehicles.

  • It may also include accessories and parts for maintenance and repair of motors.

  • Companies like Ford, Toyota, and General Motors have their own motor lines.

  • Motor line products are essential for the automotive industry and transportation sector.

Add your answer

Q65. How to work hydraulic control valve?

Ans.

Hydraulic control valves are used to control the flow of hydraulic fluid in a hydraulic system.

  • Hydraulic control valves are operated by a lever or a knob.

  • The valve can be opened or closed to control the flow of hydraulic fluid.

  • The valve can also be adjusted to control the pressure of the hydraulic fluid.

  • Hydraulic control valves are used in various applications such as construction equipment, agricultural machinery, and industrial machinery.

Add your answer

Q66. How meny car company in india

Ans.

There are currently around 15 car companies operating in India.

  • There are both domestic and international car companies in India.

  • Some of the popular car companies in India are Maruti Suzuki, Hyundai, Tata Motors, Mahindra & Mahindra, Honda, Toyota, and Ford.

  • The Indian government has also launched the National Electric Mobility Mission Plan to promote the use of electric vehicles in the country.

  • The Indian car market is highly competitive with companies constantly launching new ...read more

Add your answer

Q67. What is the difference bt BDC & Bapi

Ans.

BDC is used for data transfer between SAP and non-SAP systems, while BAPI is used for data transfer between SAP systems.

  • BDC stands for Batch Data Communication and is used for transferring data between SAP and non-SAP systems.

  • BAPI stands for Business Application Programming Interface and is used for transferring data between SAP systems.

  • BDC requires recording of the transaction and is typically used for automating repetitive tasks.

  • BAPI is a standard interface provided by SAP ...read more

View 1 answer

Q68. Polyester putty .....is component

Ans.

Polyester putty is a component used in architectural design and construction.

  • Polyester putty is a type of filler material used to repair and smooth surfaces in architectural projects.

  • It is commonly used to fill cracks, holes, and imperfections in walls, ceilings, and other surfaces.

  • Polyester putty is easy to apply and dries quickly, making it a popular choice for architects and contractors.

  • It can be sanded and painted over once dry, providing a seamless finish to the repaired...read more

View 1 answer

Q69. What’s 5s and what’s manufacturing

Ans.

5S is a methodology used in manufacturing to organize the workplace for efficiency and effectiveness.

  • 5S stands for Sort, Set in Order, Shine, Standardize, and Sustain.

  • It involves organizing the workplace to eliminate waste, improve efficiency, and ensure safety.

  • Examples include organizing tools in a designated area, labeling items for easy identification, and regularly cleaning workspaces.

  • 5S helps create a visual workplace where everything has a designated place and processes...read more

Add your answer

Q70. What is meant by LNTD

Ans.

LNTD stands for Logarithmic Mean Temperature Difference.

  • LNTD is a term used in heat transfer calculations to determine the overall temperature difference between two fluids in a heat exchanger.

  • It is calculated using the formula LNTD = (ΔT1 - ΔT2) / ln(ΔT1 / ΔT2), where ΔT1 and ΔT2 are the temperature differences at the two ends of the heat exchanger.

  • LNTD is important in designing efficient heat exchangers to maximize heat transfer.

  • For example, in a shell and tube heat exchang...read more

Add your answer

Q71. What is function of crankshaft sensor

Ans.

The crankshaft sensor detects the position and speed of the crankshaft in an engine.

  • Provides information to the engine control module to determine ignition timing and fuel injection timing

  • Helps diagnose engine problems by detecting misfires and other issues

  • Used in conjunction with the camshaft sensor to synchronize engine operation

  • Examples of engines that use crankshaft sensors include gasoline and diesel engines

Add your answer

Q72. What is Supplementary restraint system?

Ans.

Supplementary restraint system is a safety feature in vehicles that includes airbags and seatbelt pre-tensioners to protect occupants in case of a collision.

  • Supplementary restraint system is commonly known as SRS.

  • It includes airbags that deploy upon impact to cushion the occupants from hitting hard surfaces.

  • Seatbelt pre-tensioners tighten the seatbelts to reduce the forward movement of occupants during a collision.

  • SRS is designed to work in conjunction with seatbelts for maxi...read more

Add your answer

Q73. Tell me about air conditioning?

Ans.

Air conditioning is a system that cools and dehumidifies air in a space to provide comfort and improve air quality.

  • Air conditioning systems use refrigerants to absorb and release heat, cooling the air in the process.

  • They consist of components such as compressors, condensers, evaporators, and expansion valves.

  • Air conditioning can be central (whole-house) or individual units (window or portable).

  • Regular maintenance is important to ensure efficiency and prevent breakdowns.

  • Exampl...read more

Add your answer

Q74. How manny wheels are there in a car

Ans.

There are typically four wheels in a car.

  • Most cars have four wheels for stability and balance.

  • Some vehicles like trucks or buses may have more than four wheels.

  • Sports cars or motorcycles may have fewer than four wheels.

View 1 answer

Q75. Capable of bearing pressure by seniors?

Ans.

Yes, I am capable of handling pressure from seniors by staying calm, organized, and communicating effectively.

  • I have experience in managing challenging situations and meeting deadlines under pressure

  • I am able to prioritize tasks and delegate responsibilities effectively

  • I have strong communication skills to address concerns and resolve conflicts with seniors

Add your answer

Q76. What is the way to achieve target

Ans.

Setting clear goals, creating a plan, staying focused, tracking progress, adjusting strategies as needed.

  • Set specific, measurable, achievable, relevant, and time-bound goals.

  • Create a detailed plan outlining steps to reach the target.

  • Stay focused on the tasks at hand and avoid distractions.

  • Track progress regularly to ensure you are on the right path.

  • Adjust strategies as needed based on feedback and results.

  • Example: If the target is to increase sales by 20%, set monthly sales t...read more

Add your answer

Q77. What is tha tig full forme

Ans.

TIG stands for Tungsten Inert Gas.

  • TIG is a welding process that uses a non-consumable tungsten electrode to produce the weld.

  • The electrode and the weld area are protected from atmospheric contamination by an inert gas, typically argon.

  • TIG welding is commonly used for high-quality welds on thin materials, stainless steel, and non-ferrous metals.

  • It provides precise control over the welding process and produces clean and strong welds.

  • TIG welding is also known as Gas Tungsten Arc...read more

View 1 answer

Q78. What is assembly conveyor length

Ans.

Assembly conveyor length refers to the total length of the conveyor system used in the assembly process.

  • Assembly conveyor length is the distance from the beginning to the end of the conveyor system.

  • It is important to consider the length of the conveyor when designing an assembly line.

  • The length of the conveyor can impact the efficiency and productivity of the assembly process.

  • For example, a longer conveyor may be needed for larger or more complex products.

View 1 answer

Q79. Any three types of gears name ?

Ans.

Three types of gears are spur gears, helical gears, and bevel gears.

  • Spur gears have straight teeth and are used for low-speed applications.

  • Helical gears have angled teeth and are used for high-speed applications.

  • Bevel gears have cone-shaped teeth and are used for changing the direction of power transmission.

Add your answer

Q80. What is your shop floor work

Ans.

My shop floor work involves ensuring quality control and adherence to production standards.

  • Conducting quality inspections on products

  • Monitoring production processes to identify any issues

  • Implementing corrective actions to improve quality

  • Collaborating with production team to address quality concerns

View 1 answer

Q81. Who is spray booth temperature?

Add your answer

Q82. Write any topic in English with in a page.

Add your answer

Q83. HOW DO WORK IN REALY WHAT IS THE SAFTY

Ans.

Working with relays requires proper safety measures to prevent electrical hazards.

  • Ensure power is off before working on relays

  • Use appropriate personal protective equipment (PPE)

  • Follow lockout/tagout procedures

  • Regularly inspect and maintain relays

  • Train employees on proper safety procedures

  • Examples of PPE include insulated gloves, safety glasses, and flame-resistant clothing

View 1 answer

Q84. WHAT IS THE FUNCTION IN MECHINE DEFIN PLC

Ans.

PLC stands for Programmable Logic Controller and is a digital computer used for automation of electromechanical processes.

  • PLCs are used to control and automate various industrial processes such as assembly lines, robotic devices, and packaging systems.

  • They are programmed using ladder logic or other programming languages to execute specific tasks.

  • PLCs can monitor inputs from sensors and other devices, and based on the programmed logic, can control outputs such as motors, valve...read more

Add your answer

Q85. what is MNC company’s

Ans.

MNC company stands for Multinational Corporation company, which operates in multiple countries and has a global presence.

  • MNC companies have operations in multiple countries

  • They have a global presence and cater to international markets

  • Examples of MNC companies include Apple, Google, and Coca-Cola

Add your answer

Q86. How to choice Hyundai company

Ans.

Hyundai is a reputable company known for its innovative technology, quality products, and strong global presence.

  • Hyundai is a well-established company with a strong reputation in the automotive industry.

  • They are known for their innovative technology and commitment to quality.

  • Hyundai has a strong global presence, with a wide range of products and services.

  • The company offers opportunities for growth and development for employees.

  • Hyundai has a positive work culture and values di...read more

Add your answer

Q87. What is short loop quality

Ans.

Short loop quality refers to the quality of a loop that is short in length.

  • Short loop quality is important for minimizing signal loss and interference.

  • It is crucial for maintaining data integrity and transmission speed.

  • Examples include short loop quality in Ethernet cables for faster internet speeds.

Add your answer

Q88. How to analyse quality issues

Ans.

Quality issues can be analyzed by identifying root causes, collecting data, using quality tools, and implementing corrective actions.

  • Identify the root cause of the quality issue by using tools like fishbone diagram or 5 Whys.

  • Collect data related to the quality issue such as defect rates, customer complaints, and process metrics.

  • Use quality tools like Pareto analysis, control charts, and histograms to analyze the data and identify patterns or trends.

  • Implement corrective action...read more

Add your answer

Q89. You are expecting CTC

Ans.

I am expecting a competitive CTC based on my qualifications and experience.

  • I have a strong educational background and relevant work experience.

  • I have successfully completed internships and projects related to production engineering.

  • I have acquired valuable skills and knowledge in areas such as process optimization, quality control, and project management.

  • I am confident in my ability to contribute to the company's production processes and drive efficiency and productivity.

  • I am...read more

View 1 answer

Q90. Decide the goal before beginning

Ans.

Setting a clear goal is crucial for guiding actions and measuring success in sales and marketing.

  • Define specific, measurable, achievable, relevant, and time-bound (SMART) goals

  • Align goals with overall business objectives

  • Communicate goals effectively to team members

  • Regularly track progress towards goals and make adjustments as needed

Add your answer

Q91. How many types of break

Ans.

There are two main types of breaks: planned breaks and unplanned breaks.

  • Planned breaks are scheduled breaks that are typically taken during designated times, such as lunch breaks or coffee breaks.

  • Unplanned breaks are breaks that occur unexpectedly, such as when a machine malfunctions or when there is a sudden change in production schedule.

Add your answer

Q92. What is an ideal transformer

Ans.

An ideal transformer is a theoretical transformer with no losses and perfect efficiency.

  • An ideal transformer has no resistance, leakage inductance, or core losses.

  • It has a turns ratio that perfectly converts voltage and current from primary to secondary windings.

  • Efficiency is 100% in an ideal transformer.

  • Real transformers have losses due to resistance, eddy currents, and hysteresis.

View 1 answer

Q93. Jinar diod werk for electronic currcit

Ans.

The question is asking if Jinar worked on electronic circuits.

  • Yes, Jinar has experience working with electronic circuits.

  • Jinar has worked on designing and troubleshooting electronic circuits.

  • Jinar has knowledge of various electronic components and their functions.

Add your answer

Q94. Explain Working of lead acid battery.

Ans.

Lead acid battery works by converting chemical energy into electrical energy through a reversible chemical reaction.

  • Lead acid battery consists of lead dioxide (positive plate), sponge lead (negative plate), and sulfuric acid (electrolyte).

  • During discharge, sulfuric acid reacts with lead dioxide and sponge lead to produce lead sulfate and water, releasing electrical energy.

  • During charging, electrical energy is used to reverse the chemical reaction, converting lead sulfate back...read more

Add your answer

Q95. How many types of gear

Ans.

There are several types of gears used in various industries, each serving a specific purpose.

  • Types of gears include spur gears, helical gears, bevel gears, worm gears, rack and pinion gears, etc.

  • Each type of gear has unique characteristics and is used for specific applications.

  • For example, spur gears are commonly used in parallel shaft arrangements, while bevel gears are used to change the direction of power transmission.

Add your answer

Q96. What are tha SOP

Ans.

Standard Operating Procedures (SOP) are documented instructions that outline the steps and processes to be followed in various tasks or activities.

  • SOPs provide consistency and ensure that tasks are performed correctly and efficiently.

  • They help in training new employees by providing a clear guide on how to perform tasks.

  • SOPs are often used in industries such as healthcare, manufacturing, and food service to maintain quality and safety standards.

  • Examples of SOPs include protoco...read more

Add your answer

Q97. Workplace PPE wear in?

Ans.

Workplace PPE should be worn at all times to ensure safety and prevent accidents.

  • PPE includes items such as helmets, gloves, goggles, and safety shoes.

  • Employees should be trained on how to properly wear and use PPE.

  • PPE should be provided by the employer and regularly inspected for damage.

  • Failure to wear PPE can result in serious injuries or accidents.

  • Different workplaces may have specific PPE requirements based on the nature of the work.

Add your answer

Q98. Types of cars and type of motor

Ans.

There are various types of cars with different types of motors, such as electric, hybrid, gasoline, and diesel.

  • Types of cars include electric, hybrid, gasoline, and diesel.

  • Electric cars are powered by electric motors and batteries.

  • Hybrid cars have both an internal combustion engine and an electric motor.

  • Gasoline cars use internal combustion engines that run on gasoline.

  • Diesel cars use internal combustion engines that run on diesel fuel.

Add your answer

Q99. Tools equipment processing in line

Add your answer

Q100. Draw the 2d and 3d diagram

Ans.

I need more context to draw the 2D and 3D diagram. Please provide details.

  • What is the subject matter of the diagram?

  • What are the dimensions and scale of the diagram?

  • What tools or software should I use to create the diagram?

  • Are there any specific requirements or constraints for the diagram?

  • Can you provide any reference materials or examples?

Add your answer
1
2

More about working at Hyundai Motor India Limited

Top Rated Large Company - 2024
Top Rated Automobile Company - 2024
Contribute & help others!
Write a review
Share interview
Contribute salary
Add office photos

Interview Process at null

based on 63 interviews in the last 1 year
Interview experience
4.3
Good
View more
Interview Tips & Stories
Ace your next interview with expert advice and inspiring stories

Top Interview Questions from Similar Companies

3.5
 • 638 Interview Questions
4.2
 • 384 Interview Questions
4.2
 • 237 Interview Questions
4.4
 • 218 Interview Questions
3.8
 • 138 Interview Questions
4.3
 • 135 Interview Questions
View all
Top Hyundai Motor India Limited Interview Questions And Answers
Share an Interview
Stay ahead in your career. Get AmbitionBox app
qr-code
Helping over 1 Crore job seekers every month in choosing their right fit company
70 Lakh+

Reviews

5 Lakh+

Interviews

4 Crore+

Salaries

1 Cr+

Users/Month

Contribute to help millions
Get AmbitionBox app

Made with ❤️ in India. Trademarks belong to their respective owners. All rights reserved © 2024 Info Edge (India) Ltd.

Follow us
  • Youtube
  • Instagram
  • LinkedIn
  • Facebook
  • Twitter