AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Torrent Gas Interview Questions and Answers
26 Interview questions
Flash point is the lowest temperature at which vapors ignite; fire point is the temperature at which sustained combustion occurs.
Flash point is crucial for assessing flammability of liquids.
Fire point is typically a few degrees higher than the flash point.
Example: Gasoline has a flash point of around -45°C, while its fire point is about -40°C.
Used in safety regulations and material handling guidelines.
LEL and UEL of natural gas indicate the flammability range, crucial for safety in handling and usage.
LEL (Lower Explosive Limit) of natural gas is approximately 5% by volume in air.
UEL (Upper Explosive Limit) of natural gas is about 15% by volume in air.
Concentration below LEL means the mixture is too lean to ignite.
Concentration above UEL means the mixture is too rich to ignite.
Example: A natural gas leak with 6%...
Process safety focuses on preventing industrial accidents, while personal safety emphasizes individual protection from harm.
Process safety involves managing risks associated with industrial processes, such as chemical reactions.
Personal safety is concerned with protecting individuals from accidents and injuries in the workplace.
Example of process safety: Implementing safety protocols in a chemical plant to prevent...
I would prioritize the emergency situation and issue the material while informing the appropriate authorities afterwards.
Assess the urgency of the situation
Issue the material if it is a critical emergency
Inform the authorized personnel about the situation afterwards
Document the incident for future reference
Important T-codes in SAP for store management
MB51 - Material Document List
MMBE - Stock Overview
MM03 - Display Material Master Data
MMBE - Stock Overview
ME21N - Create Purchase Order
HDPE is high-density polyethylene while MDPE is medium-density polyethylene. HDPE is more rigid and has a higher melting point compared to MDPE.
HDPE has a higher density and is more rigid than MDPE
HDPE has a higher melting point compared to MDPE
MDPE is more flexible and has a lower tensile strength compared to HDPE
SDR of MDPE pipe is a ratio of the outside diameter to the wall thickness, with common types like SDR 11 and SDR 17.
SDR stands for Standard Dimension Ratio
It is calculated as the ratio of the outside diameter to the wall thickness of the pipe
Common types of MDPE pipe include SDR 11, SDR 17, etc.
Lower SDR values indicate thicker walls and higher pressure ratings
Commissioning procedure involves testing and verifying the functionality of newly installed equipment or systems.
Develop a commissioning plan
Verify installation and perform functional testing
Document and resolve any issues
Train operators and maintenance personnel
Obtain acceptance from stakeholders
Examples: commissioning a new HVAC system, commissioning a new power plant
DRS stands for Decision Review System, a technology used in cricket to review umpiring decisions.
DRS allows teams to challenge umpiring decisions made on the field.
It involves the use of technology such as ball-tracking and ultra-edge to determine the accuracy of decisions.
Each team is allowed a limited number of unsuccessful challenges per innings.
DRS has been a controversial topic in cricket due to its perceived...
DCS stands for Distributed Control System, used to control and monitor industrial processes.
DCS is a computerized control system used in industries to control and monitor various processes.
It consists of a network of controllers, sensors, and actuators that communicate with each other to control the process.
DCS allows for centralized control and monitoring of multiple processes from a single location.
It is commonl...
Torrent Gas Interview Experiences
53 interviews found
Anonymous
Selected
I appeared for an interview in Apr 2025, where I was asked the following questions.
- Q1. What is First Law of Thermodynamics
- Q2. What is Non Destructive Testing
- Q3. What is Impact testing
- Q4. Different types of Welding techniques
- Q5. What is Octane No
Akash Saravanan
Selected
I applied via Campus Placement and was interviewed in Jul 2024. There were 4 interview rounds.
(1 Question)
- Q1. Presented company details
Quantity, Date &time, direction, boat speed, train question
(1 Question)
- Q1. Civil engineering basics
(1 Question)
- Q1. Self-introduction, willingness to join company, about company
Interview Preparation Tips
Selected
(2 Questions)
- Q1. How will you issue any material if you know that the person who is providing the reservation is not authorised and it's emergency
- Ans.
I would prioritize the emergency situation and issue the material while informing the appropriate authorities afterwards.
Assess the urgency of the situation
Issue the material if it is a critical emergency
Inform the authorized personnel about the situation afterwards
Document the incident for future reference
- Q2. Tell us important T-codes in SAP for store
- Ans.
Important T-codes in SAP for store management
MB51 - Material Document List
MMBE - Stock Overview
MM03 - Display Material Master Data
MMBE - Stock Overview
ME21N - Create Purchase Order
Interview Preparation Tips
Skills evaluated in this interview
(2 Questions)
- Q1. Function of drs system
- Q2. Network simulations
(2 Questions)
- Q1. Procedure of MDPE laying
- Ans.
MDPE laying refers to the process of laying medium-density polyethylene pipes for various applications.
Excavate the trench to the required depth and width for the MDPE pipes.
Lay the pipes in the trench, ensuring proper alignment and support.
Connect the pipes using appropriate fittings and secure them in place.
Backfill the trench carefully to avoid damaging the pipes.
Pressure test the installed MDPE system to ensure it ...
- Q2. Previous company role
- Ans.
I was the Director of Marketing at a tech startup, overseeing all marketing strategies and campaigns.
Managed a team of marketing professionals
Developed and implemented marketing plans to increase brand awareness
Collaborated with sales team to drive lead generation
Utilized data analytics to measure campaign effectiveness
Anmol Gupta
(1 Question)
- Q1. What is MRS explain
(1 Question)
- Q1. It is shared as job advice for seekers.
Interview Preparation Tips
1. What is the most critical emergency that you have taken care?
2. What would be your action in case of tanker topple incident?
3.Questions related to fire chemistry like flash point, types of fire , how fire is extinguished.?
4. How can we reduce number of incidents.
5 What is most credible scenario?
6. How PV vent works.
7. Complete knowledge about fire extinguisher like size of powder, components of DCP etc.
8. Statutory compliance wrt lifting equipment and PESO requirements.
If you are having good command over soft skills, your chances of getting selected is higher. Further, you can negotiate on your own terms.
All the best.
I applied via Company Website and was interviewed in Jul 2024. There was 1 interview round.
General aptitude question of maths , gk, reasoning and english
I applied via Naukri.com and was interviewed in Jan 2024. There were 2 interview rounds.
(2 Questions)
- Q1. What is ur family background
- Q2. Need to explain
(1 Question)
- Q1. Finance related questions
Selected
I appeared for an interview in Sep 2024, where I was asked the following questions.
- Q1. Family Background
- Q2. HR based related
Interview Preparation Tips
Ravi Shankar Thakur
Selected
I applied via Campus Placement and was interviewed in Dec 2023. There were 3 interview rounds.
Question were moderate level
(2 Questions)
- Q1. Background of company
- Q2. Why should I hire you
(2 Questions)
- Q1. Frywheel vs governor
- Ans.
Frywheel and governor are both components used in engines to regulate speed, with frywheel being a rotating mass and governor being a speed control device.
Frywheel is a heavy rotating wheel used to maintain the speed of an engine by storing energy and releasing it as needed.
Governor is a speed control device that regulates the flow of fuel to the engine based on the speed of rotation.
Frywheel is more commonly used in o...
- Q2. Material science questions and ic engine
Interview Preparation Tips
- Material science and IC engine
Top trending discussions
Torrent Gas Interview FAQs
The duration of Torrent Gas interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Torrent Gas Interviews By Designations
- Torrent Gas Graduate Engineer Trainee (Get) Interview Questions
- Torrent Gas Executive Interview Questions
- Torrent Gas Management Trainee Interview Questions
- Torrent Gas Executive Engineer Interview Questions
- Torrent Gas Assistant Manager Interview Questions
- Torrent Gas Graduate Trainee Interview Questions
- Torrent Gas Operations Executive Interview Questions
- Torrent Gas Project Executive Interview Questions
- Show more
Interview Questions for Popular Designations
- Graduate Engineer Trainee (Get) Interview Questions
- Executive Interview Questions
- Management Trainee Interview Questions
- Executive Engineer Interview Questions
- Team Lead Interview Questions
- Software Engineer Interview Questions
- Software Developer Interview Questions
- Intern Interview Questions
- Show more
Overall Interview Experience Rating
based on 51 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Torrent Gas Reviews and Ratings
based on 401 reviews
Rating in categories
Pune,
Neemrana
+19-14 Yrs
Not Disclosed
|
Executive Engineer
370
salaries
|  ₹3.2 L/yr - ₹6.1 L/yr |
|
Executive
321
salaries
| ₹3 L/yr - ₹8.5 L/yr |
|
Assistant Manager
242
salaries
| ₹5.5 L/yr - ₹13.9 L/yr |
|
Graduate Engineer Trainee (Get)
175
salaries
| ₹3 L/yr - ₹5.5 L/yr |
|
Manager
56
salaries
| ₹11 L/yr - ₹35 L/yr |
NBTC GROUP
Mahanagar Gas
Gulf Oil Lubricants
Al Turki Enterprises
- Home >
- Interviews >
- Torrent Gas Interview Questions
