AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Assystem Graduate Engineer Trainee (Get) Interview Questions and Answers
Assystem Graduate Engineer Trainee (Get) Interview Experiences
2 interviews found
I applied via Company Website and was interviewed in Aug 2022. There was 1 interview round.
(2 Questions)
- Q1. Give a brief introduction about your self about your education, your achievements, field training and tell about where do you see yourself after 5 yrs.
- Q2. Question related to my branch (civil engineering) 1 What do you mean by RCC ? 2 Enlist the loads considered while designing the RCC structure ? 3 what do you mean by effective depth and effective cover ? 4...
Interview Preparation Tips
Most important thing is that one should be confident.
Be polite.
I applied via Campus Placement and was interviewed in Jul 2022. There were 2 interview rounds.
(1 Question)
- Q1. Tell me about yourself , and why did you choose civil engineering
(1 Question)
- Q1. Some questions related to my internships, reinforcement details , and some related to rebars
Interview Preparation Tips
- Reinforcement
- Water Treatment Plant
Top trending discussions
Interview questions from similar companies
Graduate Engineer Trainee (Get) Interview Questions & Answers
Torrent Power
Anonymous
posted on 13 Dec 2020
I applied via Campus Placement and was interviewed before Dec 2019. There were 5 interview rounds.
Interview Questionnaire
1 Question
- Q1. Regarding power system and some tricky technical questions
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
Wind World
Subodh Gupta
posted on 6 Apr 2015
Interview Questionnaire
18 Questions
- Q1. Question from all subjects
- Q2. Iron carbon diagram, TTT curve
- Q3. Stress-strain curve, SFD, BMD, beams, columns, shear diagram
- Q4. Bearing design, specification, diagram of bearing, bearing consideration, load specilization, materials for bearing
- Q5. Ic engine diagram, 2-stroke, 4-stroke, performance, carburization, supercharging etc
- Q6. Mechanics, 12th standered maths,
- Q7. Laws of thermodynamics, thermal engineering, power plant engineering
- Q8. Gears, types of gears with diagram, tooth profile, instantaneous center
- Q9. What is machines, higher pair, lower pair, kinematic chain, conversion of chains/
- Ans.
Machines, higher and lower pairs, kinematic chains, and conversion of chains are concepts in mechanical engineering.
Machines are devices that transmit or modify force and motion.
Higher pairs are joints that have surface contact and can transmit both force and motion.
Lower pairs are joints that have point contact and can only transmit motion.
Kinematic chains are a series of links connected by joints that transmit motion...
- Q10. All types of cycle used in thermodynamics and power plant, rankine cycle derivation
- Ans.
Rankine cycle is the most commonly used cycle in power plants. It is a thermodynamic cycle that converts heat into work.
Rankine cycle is used in steam power plants.
It consists of four processes: heating, vaporization, expansion, and condensation.
The cycle uses a working fluid, usually water, to transfer heat from a heat source to a heat sink.
Other cycles used in thermodynamics include Carnot cycle, Brayton cycle, and O...
- Q11. And all subject were covered in this round
- Q12. Tell me about yourself
- Ans.
I am a driven and passionate individual with a diverse background in marketing and project management.
I have experience in developing and executing successful marketing campaigns
I am skilled in project management and have led teams to complete complex projects on time and within budget
I am a quick learner and thrive in fast-paced environments
I am a team player and enjoy collaborating with others to achieve common goals
- Q13. Again a short technical round was there so be prepare
- Q14. How are you feeling because you are in last round.?
- Ans.
I am feeling a mix of nervousness and excitement as I approach the final round.
I am nervous because this is the last chance to prove myself
I am excited because I have made it this far and have the opportunity to showcase my skills
I am trying to stay focused and calm to perform my best
I am also reflecting on what I have learned throughout the process
Overall, I am determined to give it my all and see what happens
- Q15. Are youphysically fit?
- Ans.
Yes, I am physically fit and maintain a regular exercise routine.
I exercise for at least 30 minutes every day
I eat a balanced diet and avoid unhealthy foods
I have a healthy BMI and low body fat percentage
- Q16. Are you ready to work with us?
- Ans.
Yes, I am excited to work with you and contribute to the team's success.
I have relevant experience and skills that align with the job requirements.
I am a quick learner and adaptable to new environments.
I am a team player and believe in open communication and collaboration.
I am passionate about the industry and eager to make a positive impact.
I am willing to put in the effort and work hard to achieve our goals.
- Q17. What is your expectation with us?
- Ans.
I expect a collaborative and supportive work environment that fosters growth and development.
Clear communication and feedback
Opportunities for learning and skill-building
A culture of teamwork and respect
Fair compensation and benefits
A focus on innovation and creativity
- Q18. Where you want to see your self in five years?
- Ans.
In five years, I see myself as a successful professional with a strong network and a clear vision for my future.
I plan to continue developing my skills and knowledge in my field
I hope to have taken on more leadership roles and responsibilities
I aim to have built a strong network of contacts and mentors
I want to have a clear vision for my future and be actively working towards my goals
Interview Preparation Tips
Experience: This round is quite easy and requires a basic knowledge of core subjects, aptitude and little bit of English. what i studied in my whole b.tech career, everything was used that day. my subject paper was mechanical so it was quite easy for me to solve all these question in 40 minutes. multiple objective questions were there. any one having some basic knowledge can solve these questions very easily. from 450 students approx 160 students were selected for the next round that was group discussion. according to my experience those who scored more than 35 marks were selected for the further process.
Tips: Have a basic knowledge in strength of materials, ic engine, theory of machines, metallergy, mechanics, mathemetics, machine design, aptitude, english and the most important thing is confidence & faith upon you. during the test solve questions by your own mind capability and think always that you are right. this is the thing we have to develop inside us and cant be exchanged with others :) so have patience, confidence & faith on your capability. :)
Duration: 60 minutes
Total Questions: 50
Round: Group Discussion
Experience: this round was quite competitive. 15 students were there in each panel and 2 judges were there to judge us. we got 2 minutes to think on topic.this topic was familiar to everyone and one of my friend started to sharing his point with the panel. i was at 2nd position to start the conversation and i was in favour of the topic. i have placed my point for approx 2 minutes and then one of friend has interfared me so i stopped. then the discussion was held about 15 minutes and everyone has got the chance to speak. 8 peoples are in favour and 8 are against. but this round was quite interesting and i enjoyed it and selected for the next round. approx 80 peoples were qualified this round from all core branches.
Tips: Have a good listening capability and don't argue with the panelist. make your eye contact with your friends not with the judges. Be at your point don't change your points from favour to against whether your point is correct or not just stick with your opinion. never try to control all your friends by saying that "listen to me" "hey guyzz" and all these things because we are not the leaders ;) it is not necessary to conclude it doesn't matters more.
lastly keep calm, patience, and look energetic. :) have faith that you are the best from all of them. every thing will be good.
Duration: 15 minutes
Round: Technical Interview
Experience: this round was very tough. my technical interview duration was 90 minutes ( 1.30 hours). all of the subject were covered in this round. this round was quite hectic and requires a thorough knowledge of domains. only 30 of them were selected for the HR interview.
Tips: Have patience and a good commands in your domain subject. go through the handbook for mechanical engineering by made easy. it will be very useful in that time. :)
Round: HR Interview
Experience: this round lasts approx in 60 minutes ( 1 hour) . they tested me technically, mentally & physically.they told me to make 50 push-ups in one time to cheak my physical fitness. they asked me about my family background. interviewer was very happy and told me that " you are the first one whom i am going to select" you will got your offer-letter and all the best" they also told me that we will meet our training institute in DAMAN & DIU.
this makes me feel happy and finally i was placed that day. :) i have a joining on 1st july in DAMAN. only 6 of us were selected from mechanical and 8 students from electrical and electronics.
Tips: Patience will work in this stage and mental & physical fitness will work :) this is last round in wind world.
General Tips: Patience, FAITH, Confidence
Skills: Domain Knowledge,, aptitude, physical fitness, mental fitness, technical knowledge, english
College Name: KIIT UNIVERSITY
Funny Moments: interviewers were quite friendly. they offered me snacks during my interview :) on the day of interview they confirmed me that i am a "WIND ENGINEER" and i am placed :)
Graduate Engineer Trainee (Get) Interview Questions & Answers
Torrent Power
Anonymous
posted on 2 Dec 2022
Selected
I applied via Campus Placement and was interviewed before Dec 2021. There were 4 interview rounds.
Aptitude was Normal, not that tough but one need to be clear with basics.
(1 Question)
- Q1. Regarding college Projects, T&D losses, Power factor,
(1 Question)
- Q1. Basic Questions about self & family.
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
Torrent Power
Anonymous
posted on 17 Mar 2022
(1 Question)
- Q1. First question is always is 1. Tell me about your self 2. Family background is main focus may be 3. Asking more about your project There are many rounds but all are average according to me ! no need to ...
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
Torrent Power
Anonymous
posted on 4 Apr 2023
I applied via Campus Placement
Aptitude was simple with some basic technical questions.
(1 Question)
- Q1. About transformer, types of conductors, etc.
(1 Question)
- Q1. About my hobbies, my interest,reason for choosing electrical engineering.
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
Torrent Power
Anonymous
posted on 13 Mar 2022
24 aptitude 76 technical questions
(1 Question)
- Q1. All the subject they cove mostly focus on thermal related subject
(5 Questions)
- Q1. What is your family background?
- Ans.
My family background is diverse and multicultural.
My parents are from different countries and cultures, which has exposed me to a variety of perspectives and traditions.
I have siblings who are pursuing different career paths, including medicine and law.
My family values education and hard work, which has motivated me to pursue a career in engineering.
We enjoy traveling and experiencing new cultures together, which has b...
- Q2. Why should we hire you?
- Ans.
I am a highly motivated and skilled engineer with a passion for learning and a strong work ethic.
I have a solid educational background in engineering and have consistently demonstrated my ability to apply my knowledge to real-world problems.
I am a quick learner and am always eager to take on new challenges and expand my skill set.
I am a team player and work well with others, but am also capable of working independently...
- Q3. Where do you see yourself in 5 years?
- Ans.
In 5 years, I see myself as a senior engineer with a strong technical skillset and leadership abilities.
I plan to continue learning and growing in my role, taking on more responsibilities and challenging projects.
I hope to have developed strong relationships with my colleagues and be seen as a valuable member of the team.
I aspire to mentor and guide junior engineers, sharing my knowledge and experience to help them suc...
- Q4. What are your strengths and weaknesses?
- Ans.
My strengths include problem-solving, adaptability, and teamwork. My weaknesses include public speaking and time management.
Strengths: problem-solving (e.g. developed a new process to increase efficiency), adaptability (e.g. successfully transitioned to a new role), teamwork (e.g. collaborated with colleagues to complete a project)
Weaknesses: public speaking (e.g. nervousness during presentations), time management (e.g...
- Q5. Tell me about yourself.
- Ans.
I am a recent engineering graduate with a passion for problem-solving and innovation.
I recently graduated with a degree in engineering from XYZ University.
During my time in school, I completed several projects that focused on innovative solutions to real-world problems.
I am a quick learner and enjoy collaborating with others to find creative solutions.
In my free time, I enjoy tinkering with electronics and building thi...
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
Torrent Power
Anonymous
posted on 21 Sep 2024
Selected
I applied via Campus Placement and was interviewed in Aug 2024. There were 2 interview rounds.
First round was mixed question test, technical as well as aptitude question was asked in online mode. 25 aptitude questions(Easy) and 75 technical questions(moderate-hard)
(2 Questions)
- Q1. Aptitude Questions consisted time and work based, data interpretetion, logical and verbal reasoning
- Q2. Technical questions was mostly based on Power Plant Engineering, Thermodynamics & RAC & ICE
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
Torrent Power
Anonymous
posted on 26 Jun 2021
I applied via Campus Placement and was interviewed in May 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. I am from Instrumentation and Control branch. So questions were mostly asked related to actuators, different Temperature Measuring devices like pyrometer, RTD types, Thermocouple working explanation, abou...
Interview Preparation Tips
Assystem Interview FAQs
Tell us how to improve this page.
Assystem Interviews By Designations
- Assystem Design Engineer Interview Questions
- Assystem Bridge Design Engineer Interview Questions
- Assystem Structural Design Engineer Interview Questions
- Assystem Graduate Engineer Trainee (Get) Interview Questions
- Assystem Site Engineer Interview Questions
- Assystem Software Engineer Interview Questions
- Assystem Structural Engineer Interview Questions
- Assystem Project Engineer Interview Questions
- Show more
Graduate Engineer Trainee (Get) Interview Questions from Similar Companies
|
Design Engineer
81
salaries
|  ₹5 L/yr - ₹11 L/yr |
|
Structural Design Engineer
55
salaries
| ₹5.6 L/yr - ₹12.4 L/yr |
|
Consultant Engineer
51
salaries
| ₹4.8 L/yr - ₹9 L/yr |
|
Senior Engineer
35
salaries
| ₹7 L/yr - ₹14.5 L/yr |
|
Assistant Design Engineer
34
salaries
| ₹3 L/yr - ₹6 L/yr |
Suzlon Group
Torrent Power
Eaton
Vestas
- Home >
- Interviews >
- Assystem Interview Questions
