Descon Engineering Piping Supervisor Interview Questions and Answers

Experienced Planning Engineer with a strong background in project management, scheduling, and resource allocation across various industries.

• Managed project schedules using Primavera P6, ensuring timely completion of a $10 million infrastructure project.

• Developed and maintained detailed project plans, including timelines, milestones, and resource allocation for a renewable energy project.

• Collaborated with cross-function...read more

Cost to complete refers to the estimated amount of money required to finish a project or task.

• Cost to complete is an important metric used in project management and quantity surveying.

• It takes into account the remaining work, resources, and expenses needed to complete a project.

• It helps in assessing the financial status of a project and making informed decisions.

• Cost to complete can be calculated by subtracting the act...read more

Unit weight of steel bars varies based on their diameter and length.

• The weight of steel bars is measured in kilograms per meter (kg/m).

• The unit weight of steel bars ranges from 0.785 kg/m to 6.16 kg/m depending on their diameter.

• For example, a 10mm diameter steel bar weighs around 0.62 kg/m while a 32mm diameter steel bar weighs around 6.16 kg/m.

Pile heads are removed to allow for further construction or to ensure proper load transfer to the foundation.

• To prepare for further construction on top of the piles

• To ensure proper load transfer to the foundation

• To facilitate the installation of pile caps or beams

• To adjust the pile length if necessary

There are four deductions of 90 degree angles.

• A 90 degree angle is formed when two lines intersect at a right angle.

• In a square, all four angles are 90 degrees.

• In a rectangle, opposite angles are 90 degrees.

• In a right triangle, one angle is always 90 degrees.

Static load test is used to measure the load capacity of a structure under a constant load, while dynamic load test is used to measure the response of a structure to varying loads.

• Static load test involves applying a constant load to a structure and measuring its response over time.

• Dynamic load test involves applying varying loads to a structure to simulate real-life conditions.

• Static load test helps determine the maxi...read more

The number of tolerance of pile load test depends on the specific project requirements and standards.

• The number of tolerance of pile load test can vary based on the project specifications and standards.

• Typically, a tolerance of +/- 5% to +/- 10% is considered acceptable for pile load tests.

• Some projects may have more stringent tolerance requirements depending on the criticality of the structure.

• It is important to refer...read more

Bentonite has a range density of 17-22 lb/gal and is used in civil engineering for drilling fluid, grouting, and sealing purposes.

• Range density of bentonite is typically between 17-22 lb/gal.

• Bentonite is used in civil engineering for various purposes such as drilling fluid, grouting, and sealing.

• The range density of bentonite is important for determining its effectiveness in different applications.

• Higher range density ...read more