AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
JSW
Steel
Compare
Filter interviews by
JSW Steel ITI Fitter Interview Questions and Answers
JSW Steel ITI Fitter Interview Experiences
6 interviews found
Anonymous
Selected
I applied via Naukri.com and was interviewed in Oct 2024. There were 2 interview rounds.
Complete details after completing class
(4 Questions)
- Q1. 1/st class company work sefty anda Dom class
- Q2. Sefty class and incase fire accident h2o heightrojan Dom class completed
- Q3. Very good company office staff is very good
- Q4. This company growth good company
Interview Preparation Tips
- Test Complete
- Complete class
- Safety tips class
I appeared for an interview before Jun 2024, where I was asked the following questions.
- Q1. What is the list count of vernier calipers?
- Ans.
The list count of vernier calipers is typically 10, allowing precise measurements in millimeters.
Vernier calipers usually have a main scale and a sliding vernier scale.
The least count is determined by the smallest division on the main scale divided by the number of divisions on the vernier scale.
For example, if the main scale has 1 mm divisions and the vernier scale has 10 divisions, the least count is 1 mm / 10 = 0.1 ...
- Q2. What are the different types of pumps?
- Ans.
Pumps are mechanical devices used to move fluids by converting mechanical energy into hydraulic energy.
Centrifugal Pumps: Use rotational energy; common in water supply systems.
Positive Displacement Pumps: Move fluid by trapping a fixed amount; examples include gear pumps and diaphragm pumps.
Submersible Pumps: Designed to be submerged in fluid; often used in wells and sewage applications.
Peristaltic Pumps: Move fluid th...
- Q3. What are the different types of bearings?
- Ans.
Bearings are mechanical components that reduce friction between moving parts, enhancing efficiency and performance.
1. Ball Bearings: Commonly used in electric motors and bicycles.
2. Roller Bearings: Suitable for heavy loads, found in construction equipment.
3. Needle Bearings: Used in applications with limited space, like automotive transmissions.
4. Thrust Bearings: Designed to handle axial loads, often used in gearboxe...
- Q4. What are the different types of gears?
- Ans.
Gears are mechanical components that transmit motion and torque between machines, available in various types for different applications.
Spur Gears: Straight teeth, used in simple machines like clocks.
Helical Gears: Angled teeth, provide smoother operation, used in automotive transmissions.
Bevel Gears: Cone-shaped, used to change the axis of rotation, found in hand drills.
Worm Gears: Screw-like, provide high torque redu...
Amit Kumar
(1 Question)
- Q1. What is dp my q
Trade related questions
(2 Questions)
- Q1. How work related fields
- Ans.
Work related fields in ITI Fitter involve tasks such as assembling, installing, maintaining, and repairing machinery and equipment.
Assembling components to create finished products
Installing machinery and equipment in industrial settings
Maintaining machinery by performing regular inspections and repairs
Repairing faulty equipment to ensure smooth operation
Following blueprints and technical drawings to complete tasks
Usin...
- Q2. Your morethan of experience
(1 Question)
- Q1. Technical fitter, greduat
B. A political honors+iti fitter
Interview Preparation Tips
I have good skill for Structure fitter and all parts knowledge
Interview questions from similar companies
(1 Question)
- Q1. Tools ke bari mai
I applied via Naukri.com and was interviewed before Jan 2021. There were 3 interview rounds.
Interview Questionnaire
5 Questions
- Q1. Chemical analysis of chromite ore by ICP OES
- Ans.
ICP OES is a technique used for chemical analysis of chromite ore.
ICP OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.
It is a powerful analytical technique used for the determination of trace elements in a variety of matrices.
ICP OES can be used to determine the concentration of elements such as Cr, Fe, Mg, Al, and Si in chromite ore.
The technique involves the excitation of atoms in a sample usi...
- Q2. Principle of ICP oes
- Ans.
ICP-OES is a technique used for elemental analysis in which a sample is vaporized and excited by a plasma to emit light.
ICP-OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.
It is used to determine the concentration of elements in a sample.
The sample is vaporized and excited by a plasma to emit light, which is then analyzed to determine the elemental composition.
ICP-OES is commonly used in environ...
- Q3. Weight chemical analysis of chromite ore
- Ans.
Weight chemical analysis of chromite ore involves determining the percentage of various elements present in the ore.
The ore is first crushed and ground into a fine powder.
The powder is then mixed with various chemicals to dissolve the elements of interest.
The resulting solution is then analyzed using various techniques such as atomic absorption spectroscopy or inductively coupled plasma mass spectrometry.
The percentage...
- Q4. Knowledge of NABL
- Q5. Knowledge of ISO 17025,ISO 9001,ISO 450001, IMS
Interview Preparation Tips
I applied via Approached by Company and was interviewed in Jan 2022. There were 2 interview rounds.
(4 Questions)
- Q1. Yes i am interested Jindal saw
- Q2. Yes all questions answered me too ready
- Q3. Not problem to me job location nd other country. I am interested to Jindal group
- Q4. 5s, 3s, nd very important disciples worker at company rules and following every time nd everyday
Iti fitter
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Oct 2023. There was 1 interview round.
(5 Questions)
- Q1. What is your work Wicha of your experience Wich your experience Kumpuny name Vera are your form Wicha Year of your experience
- Ans. My work is ITI fitter and diploma Fitting and designing work My experience in asmbly work and milling work My experience Kumpuny name Sai agricultural industrial Hubli I'm from Hubali My experience Year 2years of experience
- Q2. My experience Kumpuny Sai agricultural Kumpuny Hubali
- Q3. Experience your 2year
- Q4. Work In experience assembly and Michigan works
- Q5. Milling work drilling work Press machine
Interview Preparation Tips
- ITI fitter
- Milling
- Machine Assembly
- CNC Programming
- Drilling
- Lathe Machine
- Press Machines
Milling work
Cnc work
Let work
Drilling work
Asmbly work
Other
JSW Steel Interview FAQs
Tell us how to improve this page.
JSW Steel Interviews By Designations
- JSW Steel Assistant Manager Interview Questions
- JSW Steel Graduate Engineer Trainee (Get) Interview Questions
- JSW Steel Deputy Manager Interview Questions
- JSW Steel Junior Engineer Interview Questions
- JSW Steel Assistant Engineer Interview Questions
- JSW Steel Manager Interview Questions
- JSW Steel Electrical Engineer Interview Questions
- JSW Steel Senior Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 9 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
JSW Steel ITI Fitter Reviews and Ratings
based on 27 reviews
Rating in categories
|
Assistant Manager
3.5k
salaries
|  ₹5.2 L/yr - ₹14 L/yr |
|
Junior Engineer
2.3k
salaries
| ₹1.8 L/yr - ₹5.6 L/yr |
|
Deputy Manager
1.7k
salaries
| ₹5.6 L/yr - ₹19 L/yr |
|
Manager
1.1k
salaries
| ₹7 L/yr - ₹26.1 L/yr |
|
Senior Engineer
1.1k
salaries
| ₹3.8 L/yr - ₹11 L/yr |
Tata Steel
Jindal Steel and Power
Jindal Stainless
Jindal Saw
- Home >
- Interviews >
- JSW Steel Interview Questions
