AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Bosch Assistant Manager Interview Questions and Answers
11 Interview questions
RBEI stands for Robert Bosch Engineering and Business Solutions.
RBEI is a subsidiary of the Bosch Group.
It provides engineering and IT solutions to various industries.
RBEI has its headquarters in Bangalore, India.
Some of the services offered by RBEI include software development, testing, and validation.
RBEI has a global presence with offices in various countries including Germany, USA, and Japan.
The spring stiffness depends on various factors.
The material of the spring
The thickness of the wire used in the spring
The number of coils in the spring
The diameter of the spring
The length of the spring
The type of loading on the spring
The temperature of the spring
The presence of any pre-stress in the spring
Piston rings are essential components in an engine that prevent oil from entering the combustion chamber and help maintain compression.
Piston rings create a seal between the piston and cylinder wall
They prevent oil from entering the combustion chamber
They help maintain compression by preventing gases from escaping
Piston rings also help dissipate heat from the piston
Without piston rings, the engine would lose power...
Yes, I did go through the company website and familiarized myself with various areas where Bosch is into.
I visited the Bosch website and explored the different sections such as About Us, Products & Services, and Careers.
I read about Bosch's history, values, and mission statement.
I learned about the various industries that Bosch operates in, such as automotive technology, industrial technology, and consumer goods.
I...
Pressure variation in an IC engine
Pressure variation occurs due to the movement of the piston in the cylinder
The pressure increases during the compression stroke and decreases during the exhaust stroke
The pressure variation affects the performance and efficiency of the engine
Factors like fuel quality, ignition timing, and engine load can also affect pressure variation
A spark plug ignites the fuel-air mixture in the combustion chamber of an internal combustion engine.
The spark plug is connected to the ignition coil by a wire.
The spark plug has a center electrode and a ground electrode.
When the voltage from the ignition coil is high enough, it jumps the gap between the electrodes and creates a spark.
The spark ignites the fuel-air mixture in the combustion chamber, causing combus...
Bosch HR Interview Questions
Force analysis of a spark plug
Spark plug is subjected to compression, combustion and exhaust forces
Compression force is generated by the piston pushing the air-fuel mixture into the cylinder
Combustion force is generated by the ignition of the air-fuel mixture
Exhaust force is generated by the expulsion of the exhaust gases from the cylinder
The spark plug must withstand these forces to maintain proper engine functio...
Stresses in pure bending and its variation over the length
Stresses in pure bending occur when a beam is subjected to a bending moment
The maximum stress occurs at the outermost fibers of the beam, known as the extreme fibers
The stress varies linearly from zero at the neutral axis to a maximum at the extreme fibers
The stress distribution can be represented by a stress diagram
The magnitude of the maximum stress depen...
A detailed drawing of a rectangular block with dimensions, tolerances, and surface finish.
Include all three views: front, top, and side
Label all dimensions and tolerances clearly
Specify the surface finish using appropriate symbols
Use standard drafting conventions
Include a title block with project information
Stress strain curve for ductile material
Ductile materials can undergo large plastic deformations before failure
Stress strain curve shows the relationship between stress and strain during deformation
The curve has three regions: elastic, plastic, and necking
Elastic region: linear relationship between stress and strain
Plastic region: non-linear relationship between stress and strain
Necking region: localized reduction...
Bosch Assistant Manager Interview Experiences
15 interviews found
Anonymous
Interview Questionnaire
17 Questions
- Q1. Questions from microcontrollers
- Q2. “What is the name of the person who took your technical interview?”
- Ans.
I'm sorry, I don't have that information.
N/A
- Q3. Why Bosch?
- Ans.
Bosch stands out for its innovation, sustainability, and commitment to quality, making it an ideal workplace for aspiring leaders.
Innovative Technology: Bosch invests heavily in R&D, leading to cutting-edge products like smart home devices and automotive solutions.
Sustainability Focus: The company is committed to environmental responsibility, aiming for carbon neutrality in its operations by 2020.
Diverse Opportunit...
- Q4. Full form of RBEI
- Ans.
RBEI stands for Robert Bosch Engineering and Business Solutions.
RBEI is a subsidiary of the Bosch Group.
It provides engineering and IT solutions to various industries.
RBEI has its headquarters in Bangalore, India.
Some of the services offered by RBEI include software development, testing, and validation.
RBEI has a global presence with offices in various countries including Germany, USA, and Japan.
- Q5. Why this post?
- Ans.
I am interested in this post because of the growth opportunities and the chance to lead a team.
I have experience in managing teams and want to continue to develop my leadership skills.
I am excited about the potential for growth within the company and want to be a part of that.
I am passionate about the industry and want to contribute to its success.
I believe my skills and experience make me a strong candidate for this p...
- Q6. If I get offer somewhere else what would I prefer?
- Ans.
I would consider the offer and evaluate the benefits and growth opportunities before making a decision.
I would assess the job responsibilities and compare them to my current role
I would research the company culture and values
I would consider the salary and benefits package
I would evaluate the potential for growth and advancement
I would weigh the commute and work-life balance
Ultimately, I would make a decision based on ...
- Q7. Family back ground?
- Q8. What do my friends say about me?
- Q9. Difference between hard working and smart working
- Ans.
Hard working focuses on effort and time, while smart working emphasizes efficiency and strategy to achieve goals.
Hard working involves putting in long hours, like staying late at the office to complete tasks.
Smart working prioritizes tasks based on impact, such as using project management tools to streamline workflows.
Hard working may lead to burnout if not managed, while smart working encourages work-life balance by o...
- Q10. Role model?
- Q11. What motivates you to work?
- Ans.
I am motivated by the sense of accomplishment and the opportunity to learn and grow.
I find satisfaction in completing tasks and achieving goals
I enjoy learning new skills and expanding my knowledge
I am driven by the desire to succeed and make a positive impact
I am inspired by the potential for growth and advancement within a company
- Q12. What is your achievement in life?
- Ans.
My greatest achievement was leading a team to successfully launch a new product, exceeding sales targets by 30% within the first quarter.
Led a cross-functional team of 10 members, coordinating efforts between marketing, sales, and product development.
Developed a comprehensive marketing strategy that included digital campaigns, resulting in a 50% increase in online engagement.
Implemented a customer feedback loop that al...
- Q13. Did you go through company website? Various areas where Bosch is into?
- Ans.
Yes, I did go through the company website and familiarized myself with various areas where Bosch is into.
I visited the Bosch website and explored the different sections such as About Us, Products & Services, and Careers.
I read about Bosch's history, values, and mission statement.
I learned about the various industries that Bosch operates in, such as automotive technology, industrial technology, and consumer goods.
I also...
- Q14. Name of the person who gave pre-placement-talk?
- Ans.
The pre-placement-talk was given by Mr. John Doe.
The speaker's name was Mr. John Doe.
He gave the pre-placement-talk.
He discussed the company's history, culture, and job opportunities.
He also talked about the company's values and expectations from employees.
- Q15. What are you looking for in this job?
- Ans.
I am looking for a challenging role that allows me to utilize my skills and experience to contribute to the growth of the company.
Opportunities for growth and development
A supportive and collaborative work environment
Clear expectations and goals
Recognition for hard work and achievements
A competitive salary and benefits package
- Q16. Location preference
- Q17. Plan of higher studies
- Ans.
I plan to pursue a Master's degree in Business Administration.
I have researched various universities and programs that align with my career goals.
I plan to take the GMAT exam and apply to multiple schools.
I am also considering online programs to balance work and studies.
I hope to gain a deeper understanding of business strategy and leadership.
I believe this will enhance my skills and contribute to my future success as ...
Interview Preparation Tips
Experience: I had to meet HR to say that my resume suited their profile. Then the short listing was done based on CGPA from standard X as well as the resume.
Tips: Resume should match their profile.
Round: Technical Interview
Experience: The duration was for 45-50 mins. I was asked regarding various projects that I have listed in resume, lot many questions from C, microcontrollers (since the profile is for embedded design) and one puzzle.
Tips: Brush up everything from basics to advanced topics such as C, microcontrollers, mechatronics, analog and digital circuits, control systems, signal processing.
Round: HR Interview
Experience: My friends helped me in conducting a mock interview to me before the interview. It was really helpful.
Tips: A mock interview will also be very helpful.
General Tips: Start brushing up basics. All the subjects in BTech level, Concepts in C and aptitude. Then
prepare well related to every word in the resume. A mock interview will also be very helpful.
Skill Tips: it is good to take out time every day and prepare for the placements.
Skills: Microcontroller, C Language, Project skills of resume
College Name: IIT MADRAS
A group discussion (GD) is a conversation where a group of people come together to talk about a specific topic or issue. The goal is to share ideas, express opinions, and engage in a constructive exchange of thoughts. It’s often used in educational settings, interviews, or team environments to assess communication skills, problem-solving abilities, and teamwork.
Participants typically discuss a topic, listen to each other, and respond accordingly, all while maintaining a respectful and open-minded approach.
(1 Question)
- Q1. Associat manager
Selected
I applied via Referral and was interviewed before May 2023. There was 1 interview round.
(1 Question)
- Q1. Current Role Challenges
Interview Questionnaire
5 Questions
- Q1. What are your strengths, weaknesses..?
- Q2. What irritates you most..?
- Ans.
Inefficiency and lack of communication irritate me the most.
Inefficiency in completing tasks
Lack of communication within the team
Not being able to meet deadlines due to lack of planning
Unnecessary delays in decision-making
Micromanagement
Lack of clarity in instructions
- Q3. What do you do in such situations..?
- Ans.
I assess the situation, gather information, and make a decision based on company policies and procedures.
Assess the situation and determine the severity of the issue
Gather information from all parties involved
Refer to company policies and procedures for guidance
Make a decision based on the information gathered and company guidelines
Communicate the decision to all parties involved
- Q4. Are you a leader or a follower...?
- Ans.
I am a leader who can also follow when necessary.
I believe in leading by example and inspiring others to follow.
I am comfortable taking charge and making decisions, but also value input from others.
I am adaptable and can switch between leading and following depending on the situation.
For example, in a team project, I would take the lead in organizing and delegating tasks, but also listen to and incorporate ideas from t...
- Q5. Which one is good
Interview Preparation Tips
Experience: I have a CGPA 7.38.
Round: Test
Experience: There was an online objective test
Tips: Previous year IIT Gate book is the best thing to prepare for the technical test for any company. I started doing it in October only.
Duration: 80 min minutes
Round: Interview
Experience: There were two rounds of interview ; 30min for Tech and 10 min HR.
Tips: If you are in ED they will test your basic design skills. They showed a CAD drawing and asking the meaning of symbols, then they asked questions related to general designs available in our surroundings like why is that sewage hole round on the ground why not square or others. If you are in Mechanical, they will ask u core Mech subjects. So please first prepare very well subjects related to your respective interns. A whole interview can be drawn on that. In my case it was IC engine so I answered all the questions related to it and that didn't allow them to ask in any other topic.
Round: Interview
Experience: It was gen. All HR rounds just want to test how much positive you are in life, whether you will leave the company soon.
Tips: Be prepared with answers beforehand. The answers to all the above questions should be "depends on the
situation" and describe them in which situation u will choose which one. PS: if it’s a panel where HR is also there, they will try to excite you by asking gen questions like which team you support in IPL, do u have any gf etc. to make you lite, then again shoot you with some questions. Please don’t get deviated by those.
Skill Tips: Mock tests, Aimcats, Gate book. For GDs, we organised them in our wing. It was very helpful.
Kindly do it often in your wing and among your batch mates too. Same goes for interview. There
are lots of general interview questions available on FTP server, prepare for them well and have
mock interviews. "Alumni interviews" were very helpful, please attend that. Randstad sessions were an absolutely waste of money and time. I was mainly selected due to my internship with Bosch. Prepare all subjects related to your intern. It will be the game changer.
College Name: IIT Madras
Interview Preparation Tips
Experience: CGPA cut-off: 7. The test had two parts. The level of the questions in the first part was very easy and do not require GRE or CAT skills. It had questions on verbal ability (readinc comprehension and vocabulary) and Math (time- work problems, arithmetic, percentages etc). The second part had questions related to Mechanical Engineering. It was slightly tough having a wide range of questions from Kinematics, design of machine elements, fluids , and thermodynamics .However, one can easily crack the test.
Tips: Don’t leave the questions unaswered as there is no negative marking.
Round: Interview
Experience: Around 60 students were shortlisted for the interview .There was only one round of interview which had both HR and technical questions. The interviewers were very friendly. The interview went on for approximately forty minutes. They started by asking me about my hometown, family, interests etc. Few question were: “Tell me about yourself”, “Describe your hometown”, “Why do u want to join Bosch and what do you know about it”, “Why won’t you go for MS or PhD”. The rest of the interview process was about the projects and internships and a few basic concepts of Mechanical Engineering. Each student was asked questions from different topics depending on the projects he was involved in. Basic questions I was asked : “What is casting”, “What is forming”, “How is a gear manufactured”, “What is the profile oF the gears used and why”. Apart from these, afew things about CRDi technology were asked.
Tips: Being a part of technology events in the hall will help a lot during the interview process. Google about ABS, CRDi, bearings, gears etc and study the “Thermodynamic cycles” from any thermodynamics book before the interview. Be confident.Never create an impression that you are a research orientated guy and will be going for MS or PhD. Do not panic. Do not try to bluff - they are experienced people and will find it out. Prepare very thoroughly about the projects. Learn about recent developments in the automobile sector (any technology developed by Bosch). Always smile .
General Tips: Having a CGPA>8 will enhance your chances. In mechanical, almost all the students who got selected had a CGPA of around 8.5. Mine was 8.4. However, Class X and Class XII percentages do not matter.
Internships in automobile industries definitely help. My sophomore intern was at Tata Motors Ltd. which caught the interviewer’s attention. The interview was guided by the project done by me at Tata Motors. Having a few academic projects also helps. Generally, they ask about projects mentioned in the CV. So, it’s better to be prepared about any project you may have done. Knowledge of the auto-sector is a must. Learn about recent developments in this sector.
College Name: IIT KHARAGPUR
Interview Questionnaire
5 Questions
- Q1. My interests, apart from acads
- Q2. Where I see myself in 5 years...?
- Q3. What kind of job will excite me..?
- Q4. If I would like to prefer one city over the other..?
- Ans.
I would prefer the city that offers better career opportunities and work-life balance.
Career growth prospects
Availability of job openings
Cost of living
Commute time
Quality of life
Social and cultural activities
Family and friends
Weather and climate
- Q5. And a few other questions
Interview Preparation Tips
Experience: Initial shortlisting was done on the basis of resume submission. I got a CGPA of 8.20/10.
Round: Test
Experience: There was an online Logical , Quants & Technical test
Tips: I didn't. I used educated guesses to sneak through. It would have helped if I would have revised KDOMS, some Stress/Strain Equations, and Basic Engineering Drawing Techniques.
Duration: 45 min minutes
Round: Interview
Experience: There were two rounds of interviews ;50 mins Tech, 25 mins HR. They asked about Engineering Drawing, the work I did at my 6 months intern, my stint as a Coord and Core, a few questions on my perception of fair play and honesty, what would I do in my first 30 days if the company recruits me? In short, the tech round was more like a pseudo HR round for me.
Round: Interview
Tips: I had attended several other interviews before this one that helped. I had asked a few of my friends to conduct mock interviews for me. So was reasonably well prepared (at least for the HR part). I was pretty straightforward and honest in my answers. I remember I got pretty sentimental talking about honesty, and that perhaps worked in my favour.
Skill Tips: Projects give us an edge during the interviews. You will have sufficient stuff to talk about.
College Name: IIT Madras
Interview Preparation Tips
Experience: Everyone with a GPA of more than 7 was allowed to appear for an objective online test which was held a day before the interviews. Test comprised of 3 sections: Verbal, Quantitative and Technical.Verbal and Quantitative sections were not very difficult. They were a bit lengthy though, which makes speed an important factor. Technical section comprised of basic questions most of which were conceptual or directly formula based.
Tips: Don’t leave any question as there was no negative marking. Revise basic concepts and formulas, preferably from any GATE book.
Round: Technical Interview
Experience: One round of personal interview which consisted of both technical and HR questions.Technical questions related to projects/internships. Questions related to various manufacturing processes. HR questions like where do you see yourself 5 years down the line, why don’t you go for an MBA or higher studies, what kind of a job are you looking for?
Tips: Just be yourself. Admit if you don’t know the answer to a question. Politely ask them the answer to show that you are curious. Think of a few questions about the company which you’d like to ask at the end of the interview.
General Tips: The CGPA criteria set by the company to be eligible for placement was 7 and above. Most of the students who were finally selected had a CGPA of more than 8 but a few 7 pointers were also selected. So a good GPA would definitely help but it is not the only thing that they look for. A few positions of responsibility on your CV is always good though as it gives the interviewer something to talk about apart from the academics. You would be asked about your projects and internships in great detail. Make sure to prepare them well before the interview.
College Name: IIT Kharagpur
Interview Preparation Tips
Experience: My CGPA was 9.08/10 . The initial shortlisting was done on the basis of Resume/CGPA
Round: Test
Experience: There was an online core test across all mechanical department.
Duration: 2 Hours minutes
Round: Group Discussion
Experience: There was no Group Discussion.
Round: Group Activity
Experience: There was no Group Activity.
Round: Interview
Experience: In this round my knowledge and the skills from the projects which i did , were tested. They were asked in detail.
Round: Interview
Experience: There was no HR round
Skill Tips: I had done algorithm development in my intern which matched their job profile. Interviewer
openly stated my Maths Olympiad achievement as the reason I was there. Also , a significant amount of my BTP work and intern work helped me getting the job.
College Name: IIT-Madras
Interview Questionnaire
6 Questions
- Q1. 1)Tell me about yourself
- Ans.
I am a highly motivated and experienced professional with a passion for leadership and team development.
I have over 5 years of experience in management roles
I excel at creating and implementing strategies to improve team performance
I am skilled in communication, problem-solving, and decision-making
I am dedicated to continuous learning and development
I am excited about the opportunity to bring my skills and experience t...
- Q2. 2) Why Bosch?
- Ans.
Bosch is a global leader in technology and innovation, with a strong commitment to sustainability and employee development.
Bosch's reputation for quality and innovation is unmatched in the industry
The company's commitment to sustainability aligns with my personal values
Bosch offers excellent opportunities for career growth and development
I am impressed by the company's focus on employee well-being and work-life balance
- Q3. 3) Why should i hire you?
- Ans.
I have the necessary skills, experience, and passion to excel in this role.
I have X years of experience in management and have consistently exceeded targets.
I have strong communication and leadership skills, which have helped me motivate and guide teams to success.
I am passionate about the industry and am always looking for ways to improve processes and drive growth.
I am a quick learner and am always eager to take on n...
- Q4. 4) Strengths and Weakness?
- Q5. 5) What will you do if a member of a group doesn't work?
- Ans.
I will address the issue with the member and try to find out the reason for their lack of work and provide support if needed.
Have a one-on-one conversation with the member to understand their situation
Identify any obstacles or challenges they may be facing and offer support or resources to help them overcome it
Set clear expectations and goals for the group and hold everyone accountable
Consider involving higher manageme...
- Q6. 6) What if your boss doesn't help u?
- Ans.
I would try to find alternative solutions and resources to complete the task at hand.
I would first try to communicate with my boss and express my concerns.
If that doesn't work, I would try to seek help from other colleagues or departments.
I would also try to research and find resources online or in books to help me complete the task.
If all else fails, I would try to break down the task into smaller manageable parts and...
Interview Preparation Tips
Experience: The initial shortlisting was done on CGPA and a test. I had 7.64/10 as my CGPA.
Round: Group Discussion
Experience: There was no Group Discussion.
Round: Test
Experience: It was an online test.
Test1: 1hr Test2: 30min
Round: Group Activity
Experience: There was no group activity.
Round: HR Interview
Tips: Be confident in the HR round.
Round: Technical Interview
Tips: Be perfect on the projects and intern described in the resume.
General Tips: SoM, IC engines, Heat Transfer, Thermodynamics, Mantech, TurboMachinery are to be focused upon.
1) Quant Skills : Speed and accuracy.
2) GD prep : conducted GD among ur friends and classmates
3) Interview : Be confident and cool.
4) Resume : Keep it to 1 page and prepare well.
Skill Tips: I think I got selected because of my confidence and my performance in both the rounds. Also, projects related to manufacturing sector will help u in the interview.
Test1: CAT preparation is sufficient.
Test2: GATE book, notes and slides from mechanical google site(created by sumit patil)
HR prep: Get to know about the various type of HR questions(many files in LAN)
Notes and slides from mechanical google site (created by sumit patil) helped a lot
College Name: IIT Madras
Interview Preparation Tips
Experience: There was a test based shortlisting. The test was objective had two sections. The first section had 60 aptitude questions which were very easy and the time was 60 minutes. The second section was technical(core) which had 30 questions which needed to be answered in 30 minutes.
This sections had 3-4 questions from important topics like Strength of Materials, Fluid Mech, Man Tech, KDOMS ,DOME, etc
Duration: 90 minutes
Round: Interview
Experience: The company wanted to acquire members for Manufacturing and R&D. The interviewer asked me basic questions in Man Tech like different types of Manufacturing (conventional and non-conventional). As I told him that I was interested in automobiles, he asked me about the engine and its parts, their materials, etc. A CAD drawing was shown to me to test the basic symbols like roughness parameters, etc.
Round: Interview
Experience: It was like a normal HR round with nothing radical. Basic preparation to questions like tell me about yourself, biggest achievement, strengths,weakness, etc is enough. Confidence is another important aspect they were looking for.
General Tips: Started my preparation in October but never really took off until November. It may help immensely to start early because as placements draw close, it may be tough to find time to study decently owing to tests and ppts. Also, I didn't prepare for non-core companies, but wrote the tests to improve my experience and speed in quant.
Skill Tips: Brushed up basics of all mechanical courses and prepared for HR questions. It is better to target certain companies,prepare according to each, rather than going for every company that appears on the portal. I prepared from GATE book which covers almost all topics. The lectures from placement preparation website also helped. The aptitude questions were very easy and basic quant preparation is sufficient. As I didn't write CAT, had to adjust to the time limit in the written tests. It is better to practice quant papers for improving the speed. GATE book and placement preparation website were sufficient for core fundaes. Had GDs with wingmates.
College Name: IIT Madras
Interview Preparation Tips
Experience: There were three rounds.The first was a general interview that was mainly to brief the resume.
Tips: It helps if they find something interesting in your resume that fits their profile, like a project,skill or internship.
Round: Interview
Experience: Questions were mainly centered on man tech, IC engines, conventional and non-conventional mfg procedures, 2/4 stroke engines, etc
Skill Tips: ""
College Name: IIT Madras
Top trending discussions
Bosch Interview FAQs
Some of the top questions asked at the Bosch Assistant Manager interview -
Tell us how to improve this page.
Bosch Interviews By Designations
- Bosch Assistant Manager Interview Questions
- Bosch Senior Engineer Interview Questions
- Bosch Software Engineer Interview Questions
- Bosch Intern Interview Questions
- Bosch Senior Software Engineer Interview Questions
- Bosch Graduate Apprentice Interview Questions
- Bosch Associate Software Engineer Interview Questions
- Bosch Graduate Engineer Trainee (Get) Interview Questions
- Show more
Interview Questions for Popular Designations
- Operations Manager Interview Questions
- Team Manager Interview Questions
- Branch Manager Interview Questions
- Associate Manager Interview Questions
- Department Manager Interview Questions
- Assistant Store Manager Interview Questions
- Assistant Branch Manager Interview Questions
- Shift Manager Interview Questions
- Show more
Overall Interview Experience Rating
based on 2 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Bosch Assistant Manager Reviews and Ratings
based on 116 reviews
Rating in categories
|
Senior Software Engineer
915
salaries
|  ₹11.1 L/yr - ₹22.2 L/yr |
|
Senior Engineer
881
salaries
| ₹8.4 L/yr - ₹15 L/yr |
|
Assistant Manager
686
salaries
| ₹9.9 L/yr - ₹16.9 L/yr |
|
Deputy Manager
529
salaries
| ₹14.6 L/yr - ₹25.9 L/yr |
|
Software Engineer
497
salaries
| ₹5 L/yr - ₹11 L/yr |
Yazaki
Valeo
Faurecia
Continental Automotive Components
- Home >
- Interviews >
- Bosch Interview Questions
