Jacob Electrician Interview Questions and Answers

Normal as u can solve your aptitude test

Q1. Why you are want to join Tata motors.
View 1 more answer
Q2. What is the primary tools for an electrician.
Ans. 
The primary tools for an electrician include pliers, wire strippers, screwdrivers, voltage testers, and power drills.
• Pliers are used to grip and twist wires and other components.

• Wire strippers are used to remove insulation from wires.

• Screwdrivers are used to tighten or loosen screws.

• Voltage testers are used to check if a circuit is live or not.

• Power drills are used to drill holes and drive screws.
Answered by AI
View 1 more answer

Q1. Basic knowledge of 3 phase induction motor
Add your answer
Q2. Basic knowledge of electronic equipment
Add your answer

Q1. What is the realy
Add your answer
Q2. What is the transformer
Ans. 
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
• Transformers are used to increase or decrease voltage levels in electrical circuits.

• They consist of two coils of wire, known as the primary and secondary coils.

• The primary coil is connected to the input voltage source, while the secondary coil is connected to the output load.

• Transformers...read more
Answered by AI
View 1 more answer
Q3. What is the motor
Ans. 
A motor is a device that converts electrical energy into mechanical energy to produce motion.
• Converts electrical energy into mechanical energy

• Used to produce motion in machines or equipment

• Commonly found in appliances, vehicles, and industrial machinery
Answered by AI
Add your answer
Q4. What is the diod
Ans. 
A diode is a semiconductor device that allows current to flow in one direction only.
• Diods are commonly used in electronic circuits to control the direction of current flow.

• They have two terminals - an anode and a cathode.

• When forward biased, a diode allows current to flow. When reverse biased, it blocks current.

• Examples of diodes include light-emitting diodes (LEDs) and rectifier diodes.
Answered by AI
Add your answer

Q1. You Job location
Add your answer

Q1. Basic electrical, wiring diagram, motor ,generator, alternator, basic electronic,
Add your answer
Q2. Basic electrical, wiring diagram ,motor ,generator,alternator ,power generation
Add your answer

Q1. Basic electrical ,wiring diagram ,motor ,generator, alternator,lighting
Add your answer
Q2. Basic electrical ,transformer, motor ,generator, alternator, basic electronic
Add your answer

Motor mantain ,conveyor belt safety device like bss, zss, installation

Q1. Of automobails releted
Ans. 
Doing work break pipi in tata magic ambulance
Answered by Alokkumar Gupta
Add your answer
Q2. Trim line related question
Ans. 
Head lamp fitment and teldor lamp fitment
Answered by Alokkumar Gupta
Add your answer
Q3. Trin line related question
Ans. 
R h and l h beding fitment and tata magic express beding l h and r h and tel dor beding fitment
Answered by Alokkumar Gupta
Add your answer

Q1. Difine series connection
Ans. 
A series connection is a type of electrical circuit where components are connected end-to-end, allowing current to flow through each component sequentially.
• In a series circuit, the same current flows through all components.

• If one component fails, the entire circuit is interrupted (e.g., a string of holiday lights).

• The total voltage in a series circuit is the sum of the voltages across each component.

• Example: Batteries ...read more
Answered by AI
Add your answer
Q2. Difine parallel conection
Ans. 
A parallel connection allows multiple electrical devices to operate independently on the same voltage source.
• In a parallel circuit, each device is connected directly to the voltage source.

• If one device fails, others continue to operate (e.g., lights in a room).

• Voltage across each device remains the same, while current can vary.

• Commonly used in household wiring for lights and outlets.
Answered by AI
Add your answer
Q3. What is current
Ans. 
Current is the flow of electric charge in a circuit.
• Current is measured in amperes (A).

• It is caused by the movement of electrons or other charged particles.

• Current can flow in both directions in an alternating current (AC) circuit.

• In a direct current (DC) circuit, current flows in only one direction.

• The magnitude of current is determined by the voltage and resistance in the circuit.

• Ohm's Law states that current is equa...read more
Answered by AI
Add your answer
Q4. What is DC current
Ans. 
DC current stands for Direct Current, which is the flow of electric charge in a single direction.
• DC current is characterized by a constant and steady flow of electrons in one direction.

• It is commonly produced by batteries, solar cells, and power supplies.

• Unlike AC (Alternating Current), DC current does not change its direction periodically.

• DC current is used in various applications such as powering electronic devices, ...read more
Answered by AI
Add your answer

Fundamental and controlling system

Q1. Electrical protection, fault finding, protective device and short circuit
Add your answer
Q2. Which device is very sensational in low voltage protective system?
Ans. 
The device that is very sensational in low voltage protective system is a Ground Fault Circuit Interrupter (GFCI).
• Ground Fault Circuit Interrupter (GFCI) is a device that quickly breaks an electrical circuit to prevent serious harm from an ongoing electric shock.

• GFCIs are commonly used in areas where water and electricity may come into contact, such as bathrooms, kitchens, and outdoor outlets.

• They work by constantly mo...read more
Answered by AI
Add your answer
Q3. When the line tester shows in both phase and neutral in the line should you check?
Ans. 
Yes, you should check for a possible short circuit or reversed polarity.
• Check for a possible short circuit in the wiring

• Check for reversed polarity in the electrical connections

• Ensure proper grounding of the system

• Verify the connections at the distribution board

• Consult with a senior electrician if unsure
Answered by AI
Add your answer
Q4. Says the 10 safe method when you work on electrical pannel?
Ans. 
The 10 safe methods when working on an electrical panel include proper training, de-energizing the panel, using appropriate PPE, and following lockout/tagout procedures.
• Ensure you are properly trained and qualified to work on electrical panels.

• Always de-energize the panel before starting any work.

• Use appropriate personal protective equipment (PPE) such as insulated gloves and safety glasses.

• Follow lockout/tagout proced...read more
Answered by AI
Add your answer
Q5. How many mm cable is suitable for the 15 Hp induction motor
Ans. 
The suitable cable size for a 15 Hp induction motor would typically be around 10 mm.
• The cable size for a motor depends on factors like the motor's power rating, voltage, and distance from the power source.

• For a 15 Hp motor, a cable size of around 10 mm would be suitable to handle the power requirements.

• It is important to consult with a qualified electrician or refer to the motor manufacturer's guidelines for the exact ...read more
Answered by AI
Add your answer