i
Pinnacle
Infotech
Filter interviews by
Remuneration expectations will be based on industry standards, level of experience, and scope of responsibilities.
Remuneration expectations will depend on the industry standards for the position
Level of experience and expertise will also play a significant role in determining the expected remuneration
The scope of responsibilities and duties associated with the role will impact the salary expectations
It is importan...
The order of cable sizes from 4 sqmm is 6 sqmm, 10 sqmm, 16 sqmm, 25 sqmm, 35 sqmm, 50 sqmm, 70 sqmm, 95 sqmm, 120 sqmm, 150 sqmm, 185 sqmm, 240 sqmm, 300 sqmm, 400 sqmm, 500 sqmm, 630 sqmm, 800 sqmm, 1000 sqmm.
6 sqmm
10 sqmm
16 sqmm
25 sqmm
35 sqmm
50 sqmm
70 sqmm
95 sqmm
120 sqmm
150 sqmm
185 sqmm
240 sqmm
300 sqmm
400 sqmm
500 sqmm
630 sqmm
800 sqmm
1000 sqmm
LSIG protection refers to Long-Time, Short-Time, Instantaneous, and Ground fault protection settings in circuit breakers.
LSIG protection is commonly used in circuit breakers to provide comprehensive protection against various types of faults.
Long-Time setting protects against overloads by allowing the circuit breaker to trip after a specified time delay.
Short-Time setting protects against short circuits by trippin...
Voltage drop calculation parameters include conductor material, length, cross-sectional area, current, and temperature.
Conductor material affects resistance and therefore voltage drop.
Length of the conductor directly impacts voltage drop.
Cross-sectional area of the conductor affects resistance and voltage drop.
Current flowing through the conductor influences voltage drop.
Temperature can also affect the resistance ...
Current can be calculated using the formula: Current (A) = Power (kW) / (sqrt(3) x Voltage (V) x Power Factor)
Use the formula: Current (A) = Power (kW) / (sqrt(3) x Voltage (V) x Power Factor)
Make sure to convert kW to W if necessary (1 kW = 1000 W)
Ensure the power factor is a decimal value, not a percentage (e.g. 0.85 instead of 85%)
Drawing is a freehand art form, while drafting involves precise measurements and technical details.
Drawing is a creative process where artists use freehand techniques to create images or designs.
Drafting is a technical process that involves using tools like rulers and compasses to create precise and accurate technical drawings.
Drawings are often more expressive and artistic, while drafts are used for engineering, ...
Building information modeling (BIM) is a digital representation of physical and functional characteristics of a building.
BIM is a 3D model-based process that gives architecture, engineering, and construction professionals the insight and tools to efficiently plan, design, construct, and manage buildings and infrastructure.
It allows stakeholders to visualize the entire project before it is built, helping to identif...
CIP (Cast-In-Place) involves pouring concrete on site, while Precast involves casting concrete elements off site and transporting them to the construction site.
CIP involves pouring concrete on site and allowing it to cure in place.
Precast involves casting concrete elements in a controlled environment off site.
CIP allows for more flexibility in design changes during construction.
Precast elements are typically more ...
Tilt-up wall panels are typically precast.
Tilt-up wall panels are usually precast concrete panels that are cast on site and then lifted into place.
CIP (Cast-in-Place) wall panels are poured and cured on site without being lifted into place.
Precast panels are manufactured off-site in a controlled environment and then transported to the construction site for installation.
Class 1 lap is when one bar is lapped over another and Class 2 lap is when both bars are lapped over each other.
Class 1 lap involves lapping one bar over another.
Class 2 lap involves lapping both bars over each other.
Class 1 lap is commonly used for smaller diameter bars.
Class 2 lap is commonly used for larger diameter bars.
I completed a data analysis internship at XYZ Company, where I worked on various projects involving data cleaning, visualization, and predictive modeling.
Worked on cleaning and organizing large datasets
Created data visualizations to present findings to stakeholders
Utilized statistical techniques for predictive modeling
Collaborated with team members to analyze and interpret data
Presented findings and recommendations to ...
I applied via Approached by Company and was interviewed in Oct 2024. There were 3 interview rounds.
Questions based on job profile and relevant softwares (REVIT)
I applied via Walk-in and was interviewed in Jun 2024. There were 4 interview rounds.
Given 5 Mins to speak on the on spot topic
I applied via Walk-in and was interviewed in Jun 2024. There were 4 interview rounds.
They give us 1 topic 15 people group time bound 15 min
100 marks CBT test you have to score 60 percentage to qualify for next round
Pinnacle Infotech is a leading provider of engineering and architectural services, specializing in BIM and CAD solutions.
Founded in 1992, Pinnacle Infotech has over 30 years of experience in the engineering sector.
The company specializes in Building Information Modeling (BIM), which enhances project efficiency and collaboration.
Pinnacle Infotech serves various industries, including construction, architecture, and manuf...
I applied via Company Website and was interviewed in Feb 2024. There were 2 interview rounds.
Revit software, aptitute & reasoning
The order of cable sizes from 4 sqmm is 6 sqmm, 10 sqmm, 16 sqmm, 25 sqmm, 35 sqmm, 50 sqmm, 70 sqmm, 95 sqmm, 120 sqmm, 150 sqmm, 185 sqmm, 240 sqmm, 300 sqmm, 400 sqmm, 500 sqmm, 630 sqmm, 800 sqmm, 1000 sqmm.
6 sqmm
10 sqmm
16 sqmm
25 sqmm
35 sqmm
50 sqmm
70 sqmm
95 sqmm
120 sqmm
150 sqmm
185 sqmm
240 sqmm
300 sqmm
400 sqmm
500 sqmm
630 sqmm
800 sqmm
1000 sqmm
Current can be calculated using the formula: Current (A) = Power (kW) / (sqrt(3) x Voltage (V) x Power Factor)
Use the formula: Current (A) = Power (kW) / (sqrt(3) x Voltage (V) x Power Factor)
Make sure to convert kW to W if necessary (1 kW = 1000 W)
Ensure the power factor is a decimal value, not a percentage (e.g. 0.85 instead of 85%)
LSIG protection refers to Long-Time, Short-Time, Instantaneous, and Ground fault protection settings in circuit breakers.
LSIG protection is commonly used in circuit breakers to provide comprehensive protection against various types of faults.
Long-Time setting protects against overloads by allowing the circuit breaker to trip after a specified time delay.
Short-Time setting protects against short circuits by tripping the...
I applied via Walk-in and was interviewed in Apr 2024. There were 2 interview rounds.
Genral Aptitude Like CHSl
To start an induction motor, a rotating magnetic field is created by applying a three-phase AC voltage to the stator windings.
Apply a three-phase AC voltage to the stator windings to create a rotating magnetic field
The rotating magnetic field induces currents in the rotor windings, causing the rotor to start rotating
The motor reaches its synchronous speed and continues to run at a slightly lower speed due to slip
Topic was love marriage vs arrange marriage
I applied via Walk-in and was interviewed in May 2024. There was 1 interview round.
BIM stands for Building Information Modeling, a digital representation of physical and functional characteristics of a building.
BIM is a process that involves creating and managing digital representations of physical and functional characteristics of a building.
It allows for collaboration and coordination among different stakeholders in the construction process.
BIM can be used for design, construction, and operation of...
Its a online testing process. Firstly you need thorough knowledge of your subject and need to best practice of aptitude. The timing of exam was around 2.5 hours. If you have practice you can easily crack it.
They will give a topic and give 5 minutes time to think about. You have to say to the point of the topic
Losses in a transformer are categorized as copper losses and iron losses, which are expressed as P = I^2R and P = V^2/R respectively.
Copper losses occur due to resistance in the windings and are proportional to the square of the current flowing through them.
Iron losses, also known as core losses, are caused by hysteresis and eddy currents in the transformer core and are proportional to the square of the voltage applied...
I applied via Naukri.com
About Fluid Dynamics
Simple topic about world
Top trending discussions
The duration of Pinnacle Infotech interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 54 interview experiences
Difficulty level
Duration
based on 499 reviews
Rating in categories
1-3 Yrs
Not Disclosed
5-7 Yrs
Not Disclosed
Senior Engineer
362
salaries
| ₹4 L/yr - ₹8 L/yr |
Assistant Manager
290
salaries
| ₹5.8 L/yr - ₹12.5 L/yr |
Executive Engineer
248
salaries
| ₹2 L/yr - ₹5.5 L/yr |
Deputy Manager
110
salaries
| ₹9 L/yr - ₹14 L/yr |
BIM Engineer
109
salaries
| ₹2.8 L/yr - ₹8.5 L/yr |
Xoriant
Photon Interactive
CitiusTech
Iris Software