AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Systra Consulting Interview Questions and Answers
21 Interview questions
My future target is to lead innovative projects that enhance team collaboration and drive impactful results in the organization.
Implement agile methodologies to improve project delivery speed, as seen in my previous role where we reduced delivery time by 30%.
Foster a culture of continuous improvement by conducting regular retrospectives and feedback sessions, similar to initiatives I led in past projects.
Expand my...
Slump value measures the consistency and workability of fresh concrete, indicating its fluidity and ease of placement.
The slump test involves filling a cone-shaped mold with concrete and measuring the vertical drop after removing the mold.
A higher slump value (e.g., 6 inches) indicates more fluid concrete, suitable for applications like slabs.
A lower slump value (e.g., 2 inches) suggests stiffer concrete, often us...
MCB is a miniature circuit breaker used for low voltage applications, while MCCB is a molded case circuit breaker used for higher currents and voltages.
MCB is designed for low voltage applications, typically up to 1000V, while MCCB is designed for higher currents and voltages, typically up to 2500V.
MCB is usually thermal-magnetic in operation, while MCCB can be thermal-magnetic or electronic trip units.
MCB is comp...
One newton is equal to 100,000 dynes.
One newton is the force required to accelerate a mass of one kilogram by one meter per second squared.
One dyne is the force required to accelerate a mass of one gram by one centimeter per second squared.
To convert newtons to dynes, multiply the value in newtons by 100,000.
Lap length is the amount of overlap between two reinforcing bars in a concrete structure.
Lap length is determined by the diameter of the bars and the strength of the concrete.
It is important to follow the lap length requirements to ensure the structural integrity of the building.
Lap length can vary depending on the type of reinforcement used and the specific design of the structure.
For example, lap length for tens...
To model an I-Beam and a set of piles, pile caps, pier and pier cap in Revit, follow these steps:
Create a new project and set the units to the desired scale.
Use the Structural Framing tool to create the I-Beam.
Use the Structural Foundation tool to create the piles, pile caps, pier, and pier cap.
Add dimensions and annotations to the model as needed.
Save the model and export it in the desired format.
Systra Consulting HR Interview Questions
There are several file extensions used in Revit, including .rvt, .rfa, .rte, .rft, .rte, .rte, .rvtl, .rvtz, .rvtc, .rvtm, .rvtlink, .rvtserver, .rvtjournal, .rvtlib, .rvtlog, .rvttmp, .rvtstate, .rvtbackup, .rvtjournal, .rvtserver, .rvtlib, .rvtlog, .rvttmp, .rvtstate, .rvtbackup
The most common file extension in Revit is .rvt, which is used for project files
.rfa is used for family files, which contain individual ...
Reinforcement placing in a pile involves placing steel bars or cages inside a drilled hole before pouring concrete.
Reinforcement is placed in a pile to increase its strength and stability.
The size and spacing of the reinforcement bars are determined by the design requirements.
The reinforcement is usually placed in a cage or bundle and lowered into the drilled hole.
The cage or bundle is then secured in place and th...
The question asks for actual calculations of open foundation corner stresses with provided values of moments and compression.
Perform calculations using the given values of moments and compression
Consider the geometry and dimensions of the open foundation corner
Apply appropriate formulas and equations to determine the stresses
Take into account the material properties of the foundation
Present the calculated stresses...
IS 456 design clauses specify minimum and maximum bar requirements for structural design.
IS 456 is the Indian Standard code for the design of reinforced concrete structures.
The code specifies the minimum and maximum bar diameters, spacing, and cover requirements for different structural elements.
For example, as per IS 456, the minimum diameter of longitudinal bars in beams should not be less than 10 mm.
The maximum...
Systra Consulting Interview Experiences
33 interviews found
Anonymous
Selected
(2 Questions)
- Q1. Difference between MCB and MCCB
- Q2. Different types of Breaker
- Ans.
Different types of breakers include circuit breakers, fuse breakers, and ground fault circuit interrupters.
Circuit breakers: Automatically switch off electrical circuits during abnormal conditions.
Fuse breakers: Use a fuse to interrupt the circuit when overloaded.
Ground fault circuit interrupters (GFCI): Detect imbalances in current flow to prevent electrical shocks.
Miniature circuit breakers (MCB): Provide protection ...
Selected
I applied via Recruitment Consulltant and was interviewed in Jun 2024. There was 1 interview round.
(2 Questions)
- Q1. Time sync with EI to other rail systems
- Q2. How data logger is connected to E
Selected
I applied via Walk-in and was interviewed in Jan 2024. There was 1 interview round.
(2 Questions)
- Q1. What is probation period ? One month.
- Ans.
A probation period is a trial phase for new employees to assess their fit and performance in a role before permanent employment.
Typically lasts from 3 to 6 months, depending on company policy.
Allows employers to evaluate an employee's skills and cultural fit.
Employees can also assess if the job meets their expectations.
Performance reviews are often conducted at the end of the period.
Example: A company may extend the pr...
- Q2. What is expected salary. ? 30 persent increase
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Dec 2022. There were 3 interview rounds.
As per your cv details
(3 Questions)
- Q1. What you have done in your site?
- Q2. What is your role in your site?
- Q3. Why i will hire you?
Interview Preparation Tips
Selected
I applied via LinkedIn and was interviewed before Nov 2023. There was 1 interview round.
(3 Questions)
- Q1. Basic civil engineering knowledge
- Q2. Questions on previous project
- Q3. Questionon foundation
Selected
I appeared for an interview in Jun 2023, where I was asked the following questions.
- Q1. Previous experience
- Ans.
Experienced Lead Project Manager with a strong background in delivering complex projects on time and within budget across various industries.
Led a cross-functional team of 15 in a software development project, achieving a 20% reduction in delivery time.
Implemented Agile methodologies, resulting in a 30% increase in team productivity and improved stakeholder satisfaction.
Managed a $2 million budget for a healthcare proj...
- Q2. Future target want to achieve.
- Ans.
My future target is to lead innovative projects that enhance team collaboration and drive impactful results in the organization.
Implement agile methodologies to improve project delivery speed, as seen in my previous role where we reduced delivery time by 30%.
Foster a culture of continuous improvement by conducting regular retrospectives and feedback sessions, similar to initiatives I led in past projects.
Expand my lead...
Interview Preparation Tips
(4 Questions)
- Q1. Prestressing, polymer modified bitumen, IS, IRC, ASTM, BS, EN codes
- Q2. Box segment casting, underground metro methods, TBM functions
- Q3. Prestressing manufacturer system compliances, material approval process, monthly quality report, ISO 9001 project audits, QA Implementation
- Q4. Design DDC submission reviews, method statement reviews approval process
(1 Question)
- Q1. Experience projects important tasks, risk analysis, QMS
Selected
I appeared for an interview before Mar 2024, where I was asked the following questions.
- Q1. What is the mix design of concrete?
- Ans.
Concrete mix design is the process of determining the right proportions of materials to achieve desired strength and durability.
Concrete mix design involves selecting the right ratio of cement, water, aggregates, and additives.
Common mix designs include Nominal Mix, Design Mix, and High-Strength Mix.
For example, a typical Nominal Mix for structural work might be 1:2:4 (Cement:Sand:Aggregate).
The water-cement ratio is c...
- Q2. What is the slump value in concrete testing?
- Ans.
Slump value measures the consistency and workability of fresh concrete, indicating its fluidity and ease of placement.
The slump test involves filling a cone-shaped mold with concrete and measuring the vertical drop after removing the mold.
A higher slump value (e.g., 6 inches) indicates more fluid concrete, suitable for applications like slabs.
A lower slump value (e.g., 2 inches) suggests stiffer concrete, often used fo...
- Q3. What soil tests are performed at the site?
- Ans.
Soil tests at a site assess its properties to ensure stability and suitability for construction projects.
Soil Compaction Test: Measures the density of soil to ensure it can support structures.
Atterberg Limits Test: Determines the plasticity and moisture content of fine-grained soils.
Standard Penetration Test (SPT): Evaluates soil resistance to penetration, indicating its strength.
Soil Permeability Test: Assesses the ab...
Test which is related to your field expertise
(2 Questions)
- Q1. What are the works you done with previous employers and what are the technical specifications that u know about the work.
- Ans. You can answer as per your experience and expertise
- Q2. Who is previous employers
- Ans. We can answer as you work with whome previously
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Jun 2022. There were 3 interview rounds.
(1 Question)
- Q1. Related to execution work of structure
(1 Question)
- Q1. Regarding to documents and salary
Interview Preparation Tips
Top trending discussions
Systra Consulting Interview FAQs
Tell us how to improve this page.
Systra Consulting Interviews By Designations
- Systra Consulting Structural Design Engineer Interview Questions
- Systra Consulting Quality Engineer Interview Questions
- Systra Consulting Architect Interview Questions
- Systra Consulting Bim Technician Interview Questions
- Systra Consulting Electrical Engineer Interview Questions
- Systra Consulting Structural Engineer Interview Questions
- Systra Consulting Civil Engineer Interview Questions
- Systra Consulting Senior Section Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 20 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Systra Consulting Reviews and Ratings
based on 490 reviews
Rating in categories
|
Site Engineer
45
salaries
|  ₹8.3 L/yr - ₹14 L/yr |
|
Structural Design Engineer
37
salaries
| ₹4.8 L/yr - ₹17.6 L/yr |
|
Structural Engineer
35
salaries
| ₹6.1 L/yr - ₹13.3 L/yr |
|
Senior Engineer
33
salaries
| ₹8.4 L/yr - ₹11.6 L/yr |
|
Section Engineer
26
salaries
| ₹10.3 L/yr - ₹17.4 L/yr |
L&T Construction
Saint-Gobain
AECOM
AtkinsRealis
- Home >
- Interviews >
- Systra Consulting Interview Questions
