AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Technique Control Facility Management Shift Engineer Interview Questions and Answers
6 Interview questions
Chillers safety refers to the measures in place to ensure the safe operation of chillers and prevent accidents.
Regular maintenance and inspections are crucial for ensuring the safety of chillers.
Proper training of personnel on chiller operation and safety protocols is essential.
Emergency shutdown procedures should be clearly defined and easily accessible.
Safety features such as pressure relief valves and temperatu...
Control diagrams for Star Delta and DOL starters are essential for understanding the operation of these motor starting methods.
Control diagram for Star Delta starter involves two contactors and a timer for switching between star and delta connections.
Control diagram for DOL starter includes a single contactor for direct starting of the motor.
Both diagrams show the connections of the motor, contactors, overload rel...
OGT stands for Overall Gas Turbine. It is a measure of the overall performance of a gas turbine engine.
OGT is calculated by taking into account various parameters such as turbine inlet temperature, compressor discharge pressure, and fuel flow rate.
Monitoring OGT is crucial for ensuring the efficient operation of the gas turbine engine.
An increase in OGT may indicate a potential issue with the engine, such as fouli...
Transformer safety involves measures to prevent electrical hazards and ensure proper functioning of transformers.
Regular maintenance and inspection of transformers is essential for safety
Proper grounding and insulation to prevent electrical shocks
Following safety protocols and procedures when working with transformers
Using personal protective equipment (PPE) when handling transformers
Avoiding overloading transform...
Switch gear is a combination of electrical disconnect switches, fuses or circuit breakers used to control, protect and isolate electrical equipment.
Switch gear is used to control the flow of electricity in a power system.
It includes devices like circuit breakers, fuses, and disconnect switches.
Switch gear is essential for protecting electrical equipment from overloads and short circuits.
It helps in isolating fault...
Maintenance equipment efficiency focuses on optimizing performance and reducing downtime through effective practices.
Regular maintenance schedules prevent unexpected breakdowns, e.g., weekly checks on HVAC systems.
Utilizing predictive maintenance tools can forecast equipment failures, e.g., vibration analysis in motors.
Training staff on proper equipment use enhances efficiency, e.g., operators trained on CNC machi...
Technique Control Facility Management HR Interview Questions
Technique Control Facility Management Shift Engineer Interview Experiences
2 interviews found
Nazimuddin Mondal
Selected
I applied via Walk-in and was interviewed in Jul 2024. There was 1 interview round.
(5 Questions)
- Q1. How to work OGT
- Ans.
OGT stands for Overall Gas Turbine. It is a measure of the overall performance of a gas turbine engine.
OGT is calculated by taking into account various parameters such as turbine inlet temperature, compressor discharge pressure, and fuel flow rate.
Monitoring OGT is crucial for ensuring the efficient operation of the gas turbine engine.
An increase in OGT may indicate a potential issue with the engine, such as fouling of...
- Q2. What is switch gear and how to work
- Ans.
Switch gear is a combination of electrical disconnect switches, fuses or circuit breakers used to control, protect and isolate electrical equipment.
Switch gear is used to control the flow of electricity in a power system.
It includes devices like circuit breakers, fuses, and disconnect switches.
Switch gear is essential for protecting electrical equipment from overloads and short circuits.
It helps in isolating faulty equ...
- Q3. What is transformer safety
- Q4. What is the chillers safety
- Ans.
Chillers safety refers to the measures in place to ensure the safe operation of chillers and prevent accidents.
Regular maintenance and inspections are crucial for ensuring the safety of chillers.
Proper training of personnel on chiller operation and safety protocols is essential.
Emergency shutdown procedures should be clearly defined and easily accessible.
Safety features such as pressure relief valves and temperature se...
- Q5. Draw the control diagram ,Star delta and DOL Starter
Anonymous
Selected
I appeared for an interview before Mar 2024, where I was asked the following questions.
- Q1. Basic question from Electrical
- Q2. Maintenance equipment efficiency
- Ans.
Maintenance equipment efficiency focuses on optimizing performance and reducing downtime through effective practices.
Regular maintenance schedules prevent unexpected breakdowns, e.g., weekly checks on HVAC systems.
Utilizing predictive maintenance tools can forecast equipment failures, e.g., vibration analysis in motors.
Training staff on proper equipment use enhances efficiency, e.g., operators trained on CNC machine se...
Top trending discussions
Interview questions from similar companies
I applied via Naukri.com and was interviewed in Apr 2021. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. Tell me about yourself and what are you taking care off????
Interview Preparation Tips
Selected
I applied via Company Website and was interviewed before Mar 2022. There were 2 interview rounds.
(3 Questions)
- Q1. Electrical equipments based questions
- Q2. Basically on UPS TRANSFORMER FAS WLD EPMS AND BMS
- Q3. Deeply knowledge on above things
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed in Aug 2024. There was 1 interview round.
(2 Questions)
- Q1. What is about 33 kv to 220 SLD
- Ans.
33 kV to 220 SLD refers to a switchgear system for electrical distribution at medium voltage levels.
33 kV to 220 SLD likely refers to a switchgear system designed to handle voltages between 33 kV and 220 kV.
SLD stands for Single Line Diagram, which is a schematic representation of the electrical distribution system.
This switchgear system would be used for distributing electricity from a higher voltage transmission syst...
- Q2. What is ACB & VCB
- Ans.
ACB stands for Air Circuit Breaker and VCB stands for Vacuum Circuit Breaker.
ACB is a type of circuit breaker that operates in the air where the arc is drawn in the air and extinguished using air.
VCB is a type of circuit breaker that operates in a vacuum where the arc is drawn in a vacuum and extinguished using vacuum.
ACBs are commonly used in low voltage applications while VCBs are used in medium voltage applications.
...
Interview Preparation Tips
Purushottam Gaikwad
Selected
I appeared for an interview in Mar 2024.
(2 Questions)
- Q1. How many years do you have experience
- Ans.
I have 8 years of experience working as a Shift Engineer in various industries.
I have 8 years of experience as a Shift Engineer
Worked in various industries such as manufacturing, energy, and facilities management
Experience in troubleshooting, maintenance, and operation of equipment
Familiar with safety regulations and protocols
Led teams in shift operations and coordinated with other departments
- Q2. What kind of breaker you use in your previous company
- Ans.
We used air circuit breakers in my previous company.
We used air circuit breakers for their reliability and ease of maintenance.
Air circuit breakers are commonly used in industrial settings for their high breaking capacity.
Examples of air circuit breaker brands we used include Siemens and Schneider Electric.
(3 Questions)
- Q1. Circuit Breaker rating?
- Ans.
Circuit breaker rating refers to the maximum current that the breaker can safely interrupt without causing damage.
Circuit breaker rating is typically expressed in amps (e.g. 15A, 20A, 30A).
The rating should be chosen based on the maximum current that will flow through the circuit.
It is important to select a circuit breaker with a rating higher than the maximum current to prevent tripping.
Using a circuit breaker with a ...
- Q2. How cycle breaker maintenance done
- Ans.
Cycle breaker maintenance involves regular inspection, testing, and replacement of components to ensure proper functioning.
Inspecting for signs of wear or damage
Testing functionality with appropriate equipment
Replacing faulty components as needed
Following manufacturer's guidelines for maintenance schedule
Keeping detailed records of maintenance activities
- Q3. Cleanness the breaker the breakup from CNC Check spring charge motor resistance Shake closing call tripping coil
- Ans.
Ensure proper maintenance and functionality of CNC breakers and associated components.
Check the cleanliness of the breaker to prevent operational failures.
Verify the spring charge motor resistance to ensure it operates within specifications.
Inspect the shake closing coil and tripping coil for any signs of wear or malfunction.
Interview Preparation Tips
(2 Questions)
- Q1. Electrical engineering questions should be asked for electrical engineer
- Q2. No any facilities services & donkey work
Interview Preparation Tips
1. no scope of work specified
2. no in increments of 8-9 months
3. Each month payout problem getting variable every month
4.not giving payment as per CTC
5. No canteen facility
6.bus facility available but no time for shift out getting delayed by 1 1.30hrs every day
7.hr dept very bad experience
8.wast company & senior HR dept
9. Only donkey work don't speak anything if u speak getting problem
I applied via Recruitment Consultant and was interviewed in Jun 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Work experience in mechanical
- Ans.
I have 10 years of work experience in mechanical engineering.
Designed and implemented mechanical systems for various projects
Performed analysis and simulations to optimize performance
Collaborated with cross-functional teams to ensure project success
Managed and supervised junior engineers
Implemented cost-saving measures in manufacturing processes
Interview Preparation Tips
(1 Question)
- Q1. Overall previous site infrastructure details
- Ans.
Previous site infrastructure included data centers, networking equipment, servers, and storage systems.
Data centers were located in multiple regions for redundancy.
Networking equipment included routers, switches, and firewalls.
Servers were a mix of physical and virtual machines.
Storage systems used SAN and NAS technologies.
Backup and disaster recovery plans were in place.
Monitoring tools were used to track performance ...
Multiple scenarios of UPS DG CHILLER FAILURES
Skills evaluated in this interview
I applied via Referral and was interviewed before Nov 2020. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. About my experience in low voltage system.
Interview Preparation Tips
Technique Control Facility Management Interview FAQs
Tell us how to improve this page.
Technique Control Facility Management Interviews By Designations
- Technique Control Facility Management Multi Skill Technician Interview Questions
- Technique Control Facility Management Shift Engineer Interview Questions
- Technique Control Facility Management Hvac Technician Interview Questions
- Technique Control Facility Management Fire & Safety Officer Interview Questions
- Technique Control Facility Management MIS Executive Interview Questions
- Technique Control Facility Management Facility Executive Interview Questions
- Technique Control Facility Management Technical Supervisor Interview Questions
- Technique Control Facility Management Assistant Facility Manager Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 2 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Technique Control Facility Management Shift Engineer Reviews and Ratings
based on 9 reviews
Rating in categories
|
Shift Engineer
45
salaries
|  ₹3 L/yr - ₹6.2 L/yr |
|
Multi Skill Technician
26
salaries
| ₹2.1 L/yr - ₹3.5 L/yr |
|
Electrical Technician
25
salaries
| ₹1.9 L/yr - ₹3.5 L/yr |
|
Facility Executive
22
salaries
| ₹2.4 L/yr - ₹5.8 L/yr |
|
Build Engineer
19
salaries
| ₹4 L/yr - ₹6 L/yr |
Sodexo
ISS Facility Services
BVG India
Leadec India
- Home >
- Interviews >
- Technique Control Facility Management Interview Questions
