i
Ashar
group
Filter interviews by
Excavation unit measurements include volume, area, and depth, crucial for project planning and cost estimation.
Cubic meters (m³) - Commonly used to measure the volume of soil to be excavated.
Square meters (m²) - Used for measuring the area of the excavation site.
Depth in meters (m) - Important for determining how deep the excavation needs to go.
Tons - Sometimes used to estimate the weight of the excavated material...
Effective rate escalation management in tenders involves strategic planning, clear communication, and regular monitoring.
Establish a clear escalation clause in the tender documents to define conditions for rate adjustments.
Regularly review market trends and material costs to anticipate potential escalations.
Implement a transparent communication process with stakeholders to discuss any necessary adjustments.
Use his...
Conversion of brass to Cum
Brass is an alloy of copper and zinc, while Cum is not a known substance
It is not possible to convert brass to Cum
Perhaps the question is referring to a different substance or material
The quantity of cement in M25 grade concrete is 350 kg/m³.
M25 grade concrete has a mix proportion of 1:1:2 (cement:sand:aggregate).
The total volume of concrete is taken as 1 m³.
Therefore, the quantity of cement required for 1 m³ of M25 grade concrete is 350 kg.
This is calculated by multiplying the volume of concrete by the proportion of cement in the mix.
The weight of steel varies with its diameter.
The weight of steel can be calculated using the formula: weight = volume x density
The density of steel is approximately 7850 kg/m³
The volume of steel can be calculated using the formula: volume = pi x (diameter/2)² x length
For example, a 10mm diameter steel rod with a length of 1 meter would weigh approximately 0.393 kg
Waterproofing is the process of making a structure or object resistant to water penetration.
Identify the areas that need waterproofing such as roofs, walls, and foundations.
Clean and prepare the surface to be waterproofed.
Apply a waterproofing membrane or coating such as bituminous, acrylic, or polyurethane.
Ensure proper drainage and slope to prevent water accumulation.
Test the waterproofing system for leaks and m...
Interior change in drawing refers to modifying the internal elements of a design or blueprint.
Identify the specific elements that need to be changed
Consider the impact of the changes on the overall design
Update the drawing with the new interior layout
Ensure that the changes align with the project requirements
I applied via Walk-in and was interviewed in Mar 2023. There was 1 interview round.
The weight of steel varies with its diameter.
The weight of steel can be calculated using the formula: weight = volume x density
The density of steel is approximately 7850 kg/m³
The volume of steel can be calculated using the formula: volume = pi x (diameter/2)² x length
For example, a 10mm diameter steel rod with a length of 1 meter would weigh approximately 0.393 kg
Waterproofing is the process of making a structure or object resistant to water penetration.
Identify the areas that need waterproofing such as roofs, walls, and foundations.
Clean and prepare the surface to be waterproofed.
Apply a waterproofing membrane or coating such as bituminous, acrylic, or polyurethane.
Ensure proper drainage and slope to prevent water accumulation.
Test the waterproofing system for leaks and make n...
Conversion of brass to Cum
Brass is an alloy of copper and zinc, while Cum is not a known substance
It is not possible to convert brass to Cum
Perhaps the question is referring to a different substance or material
I applied via Naukri.com and was interviewed in Mar 2023. There were 4 interview rounds.
QA QC related questions
I appeared for an interview before Jul 2024, where I was asked the following questions.
Excavation unit measurements include volume, area, and depth, crucial for project planning and cost estimation.
Cubic meters (m³) - Commonly used to measure the volume of soil to be excavated.
Square meters (m²) - Used for measuring the area of the excavation site.
Depth in meters (m) - Important for determining how deep the excavation needs to go.
Tons - Sometimes used to estimate the weight of the excavated material.
Effective rate escalation management in tenders involves strategic planning, clear communication, and regular monitoring.
Establish a clear escalation clause in the tender documents to define conditions for rate adjustments.
Regularly review market trends and material costs to anticipate potential escalations.
Implement a transparent communication process with stakeholders to discuss any necessary adjustments.
Use historic...
I applied via Company Website and was interviewed in Jan 2023. There were 2 interview rounds.
Interior change in drawing refers to modifying the internal elements of a design or blueprint.
Identify the specific elements that need to be changed
Consider the impact of the changes on the overall design
Update the drawing with the new interior layout
Ensure that the changes align with the project requirements
I applied via Approached by Company and was interviewed before Jul 2022. There were 4 interview rounds.
I applied via Referral and was interviewed in Sep 2022. There were 2 interview rounds.
I applied via Naukri.com and was interviewed before Jul 2022. There were 2 interview rounds.
Top trending discussions
The duration of Ashar group interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 8 interview experiences
Difficulty level
Duration
based on 61 reviews
Rating in categories
Junior Engineer
18
salaries
| ₹2 L/yr - ₹3.9 L/yr |
Billing Engineer
11
salaries
| ₹2.4 L/yr - ₹4.2 L/yr |
Civil Engineer
11
salaries
| ₹2.8 L/yr - ₹6 L/yr |
Estimation & Billing Engineer
9
salaries
| ₹2.7 L/yr - ₹5 L/yr |
Assistant Manager
8
salaries
| ₹3.7 L/yr - ₹8.2 L/yr |
Signature Global
Advance India Projects
Pittie Group
Vestian Global Workplace Services