AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Bechtel Interview Questions and Answers
40 Interview questions
WBS stands for Work Breakdown Structure, a hierarchical decomposition of the total scope of work to be carried out by the project team.
WBS breaks down the project deliverables into smaller, more manageable components.
It helps in organizing and defining the total scope of the project.
Each level of the WBS represents a different level of detail.
It is a visual representation of the project scope.
Example: In a constru...
Control circuit drawing shows the control components and their interconnections, while power circuit drawing shows the power components and their connections.
Control circuit drawing includes relays, switches, and control devices.
Power circuit drawing includes transformers, circuit breakers, and motors.
Control circuit drawing focuses on the logic and sequencing of operations.
Power circuit drawing focuses on the dis...
Hoop stresses in pipes are circumferential stresses that occur due to internal pressure, and their ratios are important for determining the safety of the pipe.
Hoop stress is calculated using the formula: P*D/2t, where P is the internal pressure, D is the diameter of the pipe, and t is the thickness of the pipe wall.
The ratio of hoop stress to longitudinal stress is important in determining the safety factor of the...
Various materials used for pipe making include steel, copper, PVC, and HDPE.
Steel: commonly used for high-pressure applications
Copper: used for water supply lines
PVC: lightweight and corrosion-resistant, often used for drainage systems
HDPE: flexible and durable, suitable for underground piping
The rise is the vertical distance between two consecutive steps, while the tread is the horizontal distance.
The rise is typically around 7-8 inches, while the tread is usually around 10-11 inches.
The rise and tread dimensions are important for ensuring safe and comfortable stair design.
Building codes often dictate the minimum and maximum rise and tread dimensions for safety reasons.
Pitch distance in bolt refers to the distance between the centers of adjacent bolts in a bolted connection.
Pitch distance is typically measured from the center of one bolt to the center of the next bolt in a row.
It is important to maintain consistent pitch distances to ensure proper load distribution and structural integrity.
For example, in a bolted connection with a pitch distance of 2 inches, the centers of adja...
Fixed connection does not allow rotation at the base plate, while pinned connection allows rotation.
Fixed connection is rigid and does not allow rotation at the base plate.
Pinned connection allows rotation at the base plate.
Fixed connection provides more stability and resistance to lateral forces.
Pinned connection is more flexible and allows for some movement.
Examples: Fixed connection is commonly used in high-ris...
To create a pipe rack section on both directions.
Identify the location and dimensions for the pipe rack section
Consider the load requirements and support structures
Design the pipe rack section using appropriate materials and connections
Ensure proper spacing and alignment for pipes in both directions
EVM stands for Earned Value Management. It is a project management technique used to track the performance and progress of a project.
EVM integrates project scope, schedule, and cost to provide a comprehensive view of project performance.
It helps in measuring project performance against the baseline plan and identifying variances.
Key EVM metrics include Planned Value (PV), Earned Value (EV), Actual Cost (AC), Cost ...
Minimum gap between two structures for seismic point of view is typically around 1.5 times the height of the taller structure.
Minimum gap is usually 1.5 times the height of the taller structure to reduce seismic interaction.
This gap helps prevent collision or structural damage during an earthquake.
Building codes and regulations may specify minimum gaps for seismic safety.
Example: If one building is 100 feet tall, ...
Bechtel Interview Experiences
70 interviews found
Jujjavarapu Kiran Kumar
Selected
I applied via Naukri.com and was interviewed in Nov 2022. There was 1 interview round.
(4 Questions)
- Q1. What all the recent works you have done?
- Ans.
I have recently worked on designing and analyzing the structural integrity of a high-rise building and a suspension bridge.
Designed and analyzed the structural integrity of a 50-story high-rise building in downtown area
Conducted a feasibility study and provided recommendations for a suspension bridge project over a river
Collaborated with architects and contractors to ensure compliance with building codes and safety sta...
- Q2. Explain about recent work in details from initial stage to execution stage?
- Ans.
I recently worked on the design and construction of a new office building.
Conducted site analysis and feasibility studies
Developed structural design plans and calculations
Coordinated with architects and contractors throughout construction process
Performed regular site visits to ensure adherence to design specifications
Completed project on time and within budget
- Q3. Questions in Basic frames and SFD, BMD.
- Q4. Explain connection design of beam to beam?
- Ans.
Connection design of beam to beam involves selecting appropriate fasteners and designing the connection to transfer loads safely.
Select appropriate fasteners such as bolts, screws, or welds based on the loads and type of connection.
Design the connection to transfer loads safely and efficiently.
Consider factors such as shear, bending, and torsion when designing the connection.
Ensure that the connection is durable and ca...
Interview Preparation Tips
- Steel structure design
- RCC foundation
Electrical Commissioning Technician Interview Questions & Answers
Mohd Neyaz Ahmad
posted on 7 Feb 2025
(2 Questions)
- Q1. What is different between control circuit drawing and power circuit drawing
- Ans.
Control circuit drawing shows the control components and their interconnections, while power circuit drawing shows the power components and their connections.
Control circuit drawing includes relays, switches, and control devices.
Power circuit drawing includes transformers, circuit breakers, and motors.
Control circuit drawing focuses on the logic and sequencing of operations.
Power circuit drawing focuses on the distribu...
- Q2. Megar testing & phase rotation
I applied via Campus Placement and was interviewed in Sep 2024. There were 3 interview rounds.
Core q were there, which is related to process and industrial instrumentation
(3 Questions)
- Q1. Valve related q
- Q2. Cost estimation
- Q3. General talk regarding campus , company
(2 Questions)
- Q1. Resume grinding
- Q2. Why do u want to join
- Ans.
I am passionate about utilizing my skills in estimation and engineering to contribute to the growth and success of the company.
I have a strong background in engineering and estimation, making me well-suited for the role.
I am excited about the opportunity to work on challenging projects and contribute to the company's success.
I believe that my skills and experience align well with the requirements of the position.
I am e...
Interview Preparation Tips
Mazharul Khan
Selected
I applied via Approached by Company and was interviewed in Jul 2024. There was 1 interview round.
(7 Questions)
- Q1. I am interested work in cape
- Q2. If have any vscancy in my job
- Q3. How many sallery give in saudi Arabia in workers
- Ans.
Salaries for sheet metal workers in Saudi Arabia vary based on experience, location, and employer, typically ranging from $1,500 to $3,000 monthly.
Entry-level sheet metal workers can earn around $1,500 per month.
Experienced workers with specialized skills may earn up to $3,000 monthly.
Salaries can vary significantly based on the region, with urban areas often offering higher pay.
Additional benefits may include housing ...
- Q4. What facilities in saudi Arabia cape company in workers
- Q5. Cape company in saudi Arabia 1year after or 2 years
- Q6. What is the salary in your company
- Q7. What is the facility in your company
Interview Preparation Tips
(3 Questions)
- Q1. My own introduction
- Q2. Various Terms and conditions used in procurement
- Ans.
Various terms and conditions used in procurement include payment terms, delivery terms, warranty terms, and termination clauses.
Payment terms: specify when and how payment will be made for goods or services
Delivery terms: outline how and when the goods will be delivered
Warranty terms: detail the warranty provided for the goods or services
Termination clauses: specify the conditions under which the contract can be termin...
- Q3. Specific procurement related questions on the kind of equipment/piping orders handled
(2 Questions)
- Q1. Your long term goals
- Ans.
My long-term goals include advancing my career in procurement, enhancing team collaboration, and driving sustainable sourcing practices.
Aim to become a senior procurement leader within the next 5-7 years, overseeing larger projects and teams.
Focus on developing strategic partnerships with suppliers to foster innovation and reduce costs, as seen in my previous role where I negotiated a 15% cost reduction.
Commit to conti...
- Q2. Openness for relocation and how well can you perform is a given pressure situation with example
Interview Preparation Tips
I applied via Campus Placement and was interviewed in Aug 2024. There were 2 interview rounds.
(2 Questions)
- Q1. What is hoop's stresses in pipes and their ratios.
- Ans.
Hoop stresses in pipes are circumferential stresses that occur due to internal pressure, and their ratios are important for determining the safety of the pipe.
Hoop stress is calculated using the formula: P*D/2t, where P is the internal pressure, D is the diameter of the pipe, and t is the thickness of the pipe wall.
The ratio of hoop stress to longitudinal stress is important in determining the safety factor of the pipe...
- Q2. What are the different types of material used for pipe makng ?
- Ans.
Various materials used for pipe making include steel, copper, PVC, and HDPE.
Steel: commonly used for high-pressure applications
Copper: used for water supply lines
PVC: lightweight and corrosion-resistant, often used for drainage systems
HDPE: flexible and durable, suitable for underground piping
(2 Questions)
- Q1. Tell me about yourself ?
- Ans.
I am a plant design engineer with a passion for creating efficient and sustainable solutions for industrial processes.
I have a degree in mechanical engineering with a focus on plant design
I have experience working on projects that involve designing and optimizing plant layouts
I am proficient in CAD software and have a strong understanding of process engineering principles
I have a track record of successfully implementi...
- Q2. Your family background ?
- Ans.
My family background is diverse and supportive, with members in various professions and locations.
My family consists of professionals in different fields such as engineering, medicine, and education.
We have a strong support system and value education and hard work.
Some of my family members live in different parts of the country, providing a wide range of perspectives and experiences.
Manav verma
Selected
I applied via Referral and was interviewed in Aug 2024. There were 2 interview rounds.
(2 Questions)
- Q1. Basics of Invoice processing
- Q2. Basics of accounting
(1 Question)
- Q1. General discussion
Interview Preparation Tips
Pradyuman Mani Tripathi
(1 Question)
- Q1. Regarding Ran profile technical interview was done
(1 Question)
- Q1. Tell me about yourself
Interview Preparation Tips
Selected
I applied via Company Website and was interviewed in May 2024. There was 1 interview round.
(2 Questions)
- Q1. Asked about Seismic analysis of structures.
- Q2. Asked about steel detailing.
Selected
I applied via Company Website and was interviewed in Apr 2024. There was 1 interview round.
(2 Questions)
- Q1. How would you manage design of power plant
- Ans.
I would manage the design of a power plant by coordinating with engineers, ensuring compliance with regulations, and monitoring progress.
Coordinate with engineering team to develop detailed design plans
Ensure compliance with safety regulations and environmental standards
Monitor progress and address any design issues or changes
Collaborate with stakeholders to incorporate feedback and make necessary adjustments
- Q2. Standard data is on my tips and that becomes the basis for another on based on mega watts
(2 Questions)
- Q1. What is wbs ?
- Ans.
WBS stands for Work Breakdown Structure, a hierarchical decomposition of the total scope of work to be carried out by the project team.
WBS breaks down the project deliverables into smaller, more manageable components.
It helps in organizing and defining the total scope of the project.
Each level of the WBS represents a different level of detail.
It is a visual representation of the project scope.
Example: In a construction...
- Q2. Your current salary
- Ans.
My current salary is competitive based on industry standards and my level of experience.
My current salary is in line with industry benchmarks for Project Control Engineers.
I have received regular salary increases based on performance evaluations.
I am open to discussing salary expectations for this role during the interview process.
Top trending discussions
Bechtel Interview FAQs
The duration of Bechtel interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Bechtel Interviews By Designations
- Bechtel Engineer Interview Questions
- Bechtel Senior Engineer Interview Questions
- Bechtel Structural Engineer Interview Questions
- Bechtel Process Engineer Interview Questions
- Bechtel Project Control Manager Interview Questions
- Bechtel Project Manager Interview Questions
- Bechtel Electrical Engineer Interview Questions
- Bechtel Software Developer Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 74 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Bechtel Reviews and Ratings
based on 781 reviews
Rating in categories
Gurgaon / Gurugram
18-27 Yrs
Not Disclosed
|
Senior Engineer
113
salaries
|  ₹17.8 L/yr - ₹49 L/yr |
|
Process Engineer
68
salaries
| ₹8 L/yr - ₹20 L/yr |
|
Engineer
63
salaries
| ₹6 L/yr - ₹26.2 L/yr |
|
Electrical Designer
63
salaries
| ₹6 L/yr - ₹22 L/yr |
|
Structural Engineer
53
salaries
| ₹6.6 L/yr - ₹18.5 L/yr |
L&T Construction
Shapoorji Pallonji Group
Saint-Gobain
AECOM
- Home >
- Interviews >
- Bechtel Interview Questions
