Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by DS-MAX Properties Team. If you also belong to the team, you can get access from here

DS-MAX Properties Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

DS-MAX Properties Electrical Design Engineer Interview Questions and Answers

Updated 26 May 2025

DS-MAX Properties Electrical Design Engineer Interview Experiences

1 interview found

Interview experience
1
Bad
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview in Apr 2025, where I was asked the following questions.

  • Q1. AutoCAD tool test
  • Ans. 

    AutoCAD is a vital tool for Electrical Design Engineers, enabling precise drafting and design of electrical systems.

    • AutoCAD allows for the creation of detailed electrical schematics, such as circuit diagrams.

    • It supports layer management, enabling the organization of different electrical components.

    • Users can utilize blocks for repetitive elements, like switches or outlets, to save time.

    • AutoCAD's annotation tools help in...

  • Answered by AI
  • Q2. Basics of electrical design
  • Q3. Basic circuits for the flats
  • Ans. 

    Basic circuits for flats involve designing electrical systems for residential units, ensuring safety and efficiency.

    • Design circuits for lighting, outlets, and appliances.

    • Use circuit breakers for safety; e.g., 15A for lighting circuits.

    • Incorporate GFCI outlets in wet areas like kitchens and bathrooms.

    • Plan for load calculations to prevent overload; e.g., total wattage should not exceed circuit capacity.

    • Consider energy-ef...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - HR lacks the authority and knowledge about the budget for the required positions. As I previously stated my current salary and indicated that I would consider attending an interview if offered a suitable raise, I was later asked to participate in the interview process. Unfortunately, this lengthy and tedious process spanned two weeks, after which I received a salary offer significantly lower than what I currently earn at my present company. This situation resulted in a waste of time, as it would have been more efficient for them to disclose the allocated budget for the position upfront.

Top trending discussions

View All
Interview Hub
5d (edited)
anshitanegi
·
ex -
Planet Spark
When HR’s Chinese English made me drop the interview!
So, I talked to the HR yesterday about the interview. I asked Please send me the location But their English… bro I was shocked! It was like talking to someone jisne english nahi kuch ar hi seekh liya ho, if the HR’s English is this I can only imagine the rest of the company I decided to drop the interview with this chinese english😶‍🌫️
FeedCard Image
Got a question about DS-MAX Properties?
Ask anonymously on communities.

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - They also give you a chance to find out if the job and company are right for you. Follow the tips here to ace your interviews.
. Strengths
. Willingness to work and flexibility
. Leadership skills
. Ability and willingness to learn new things
. Contributions to the organizations in which . you have worked or volunteered
. Creativity in solving problems and working with people

Electrical Design Engineer Interview Questions Asked at Other Companies

Q1. 8.How do we calculate Cabel sizing? Formula for Voltage drop? How ... read more
Q2. What kind of input is required for a single-line diagram?
Q3. 6.What is Percentage Impedance? Importance in short circuit curre ... read more
Q4. 13.Lighting calculation? What is light loss factor ? What is util ... read more
Q5. What are non-linear loads? What is the difference between non-lin ... read more
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Regarding Uplift, overburden pressure. Overturning,
  • Q2. Regarding types of tanks and conditions, crackwidth criteria and conceptual questions from code and methodology for designing a structure, how loads calculated, Hydrodynamic stress ??

Interview Preparation Tips

Interview preparation tips for other job seekers - Just go through basic concepts and latest Codal provisions.

I applied via Naukri.com and was interviewed in Nov 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Mostly questions was switchyard and substations maintenance,

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn about your work in deeply and read basics about your field

I appeared for an interview in May 2022.

Round 1 - Technical 

(1 Question)

  • Q1. Questions are related to the operation of the substation equipment like VCB transformer panels etc
Round 2 - Technical 

(1 Question)

  • Q1. 220 kv switchyard, switchgear equipments

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep knowing what you are doing as daily basis Operation and maintenance
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in May 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Average, number, compound number ,clocks

Round 3 - Technical 

(2 Questions)

  • Q1. Mechanical process , Site engineer
  • Q2. Mechanical type , oil and gas
Round 4 - One-on-one 

(1 Question)

  • Q1. Mechanical Question, Oil and gas

DS-MAX Properties HR Interview Questions

9 questions and answers

Q. What are your ideas to improve company goals?
Q. Why do you want to switch?
Q. Briefly describe your experience and key achievements.
Interview experience
4
Good
Difficulty level
Hard
Process Duration
-
Result
Selected Selected
Round 1 - Technical 

(1 Question)

  • Q1. Department related MEP
Are these interview questions helpful?
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I appeared for an interview in Jan 2025, where I was asked the following questions.

  • Q1. Tell Me about your self
  • Ans. 

    I am a dedicated Electrical Engineer with a passion for innovative design and a strong background in circuit analysis and renewable energy.

    • Graduated with a Bachelor's degree in Electrical Engineering from XYZ University.

    • Completed an internship at ABC Corp, where I worked on power distribution systems.

    • Led a team project to design a solar energy system that increased efficiency by 20%.

    • Proficient in software tools like MA...

  • Answered by AI
  • Q2. Difference between AC and DC
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
  • Q1. Which gas from in STP plant
  • Q2. What is the ph valve in stp inlet ?
  • Ans. 

    The pH valve in STP inlet regulates the acidity or alkalinity of wastewater before treatment.

    • pH valves help maintain optimal conditions for biological treatment processes.

    • They can prevent corrosion in pipes and equipment by controlling acidity.

    • For example, a pH of 7 is neutral, while below 7 is acidic and above 7 is alkaline.

    • Adjustments may involve adding chemicals like sodium hydroxide or sulfuric acid.

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What is Transformer
  • Ans. A device for reducing or increaseing the electrical force
  • Answered Anonymously
Round 3 - Technical 

(2 Questions)

  • Q1. How many types of transfermer
  • Q2. 2 type dary tape oil type

Skills evaluated in this interview

DS-MAX Properties Interview FAQs

How to prepare for DS-MAX Properties Electrical Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at DS-MAX Properties. The most common topics and skills that interviewers at DS-MAX Properties expect are AutoCAD and Electrical Design.
What are the top questions asked in DS-MAX Properties Electrical Design Engineer interview?

Some of the top questions asked at the DS-MAX Properties Electrical Design Engineer interview -

  1. Basic circuits for the fl...read more
  2. Basics of electrical des...read more

Tell us how to improve this page.

Overall Interview Experience Rating

1/5

based on 1 interview experience

Difficulty level

Easy 100%

Duration

2-4 weeks 100%
View more

DS-MAX Properties Electrical Design Engineer Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

3.0

Skill development

4.0

Work-life balance

3.0

Salary

5.0

Job security

4.0

Company culture

3.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Civil Site Engineer
39 salaries
unlock blur

₹2 L/yr - ₹5 L/yr

Site Engineer
33 salaries
unlock blur

₹2 L/yr - ₹5.1 L/yr

Project Engineer
20 salaries
unlock blur

₹3.6 L/yr - ₹8.2 L/yr

Project Manager
18 salaries
unlock blur

₹3.3 L/yr - ₹8 L/yr

Store Officer
18 salaries
unlock blur

₹3 L/yr - ₹5.6 L/yr

Explore more salaries
Compare DS-MAX Properties with

JLL

4.1
Compare

CBRE

4.1
Compare

NoBroker

3.1
Compare

Lodha Group

4.0
Compare
write
Share an Interview