AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
HCC Infrastructure Interview Questions and Answers
23 Interview questions
RCC stands for Reinforced Cement Concrete, a composite material used in construction for its strength and durability.
RCC combines concrete's compressive strength with steel's tensile strength.
Commonly used in beams, columns, slabs, and foundations.
Example: RCC is used in constructing bridges and high-rise buildings.
The mix typically includes cement, aggregates, water, and steel reinforcement.
Effective management of labor and materials ensures project efficiency, cost control, and timely completion.
Plan resource allocation: Assess project needs and allocate labor and materials accordingly.
Use project management software: Tools like MS Project or Trello can help track labor hours and material usage.
Implement just-in-time inventory: Reduce waste by ordering materials as needed, minimizing storage costs.
C...
Maintaining quality involves systematic processes, adherence to standards, and continuous improvement to ensure project success.
Implement a quality management system (QMS) to standardize processes and ensure compliance.
Conduct regular training sessions for team members to keep them updated on best practices.
Utilize quality control tools like Six Sigma or Lean methodologies to identify and eliminate defects.
Perform...
Effective problem-solving involves identifying issues, analyzing options, and implementing solutions systematically.
Define the problem clearly: For example, if a project is behind schedule, specify the reasons such as resource allocation or unforeseen delays.
Gather relevant information: Collect data from team members, project reports, and stakeholder feedback to understand the context.
Analyze potential solutions: ...
Working in a tunnel involves various tasks such as planning, excavation, ventilation, and safety measures.
Planning and designing the tunnel layout
Excavating the tunnel using appropriate methods and equipment
Ensuring proper ventilation to maintain air quality
Implementing safety measures to prevent accidents
Monitoring and maintaining the tunnel's structural integrity
Coordinating with other professionals involved in ...
M20 concrete mix ratio is 1:1.5:3, indicating 1 part cement, 1.5 parts sand, and 3 parts aggregate by volume.
M20 concrete is a nominal mix with a characteristic compressive strength of 20 MPa.
The mix ratio of 1:1.5:3 is commonly used for medium-strength structures.
For example, in a 1 cubic meter mix, you would use approximately 400 kg of cement, 600 kg of sand, and 1200 kg of aggregate.
Water-cement ratio is crucia...
Cement grades indicate the strength and quality of cement, essential for construction projects.
Cement grades are classified based on their compressive strength, measured in megapascals (MPa).
Common grades include 33, 43, and 53, with 53 being the highest strength cement.
Grade 33 is suitable for general construction, while Grade 53 is used for high-strength applications.
Higher grade cement allows for thinner struct...
The shape of slump in a slump cone test is typically conical.
The shape of slump is conical, with the top being wider than the base.
The height of the slump is measured to determine the workability of the concrete.
Different types of slumps (true slump, shear slump, collapse slump) indicate different levels of workability.
Example: A true slump has a smooth, symmetrical shape with a slight collapse at the center.
Yes, I know bbs making.
BBS stands for Bar Bending Schedule, which is a document that provides details of reinforcement steel bars required for construction.
BBS making involves preparing the schedule by calculating the required length, weight, and number of bars for each structural element.
It is an important task for ensuring the strength and durability of the structure.
BBS making requires knowledge of engineering ...
RCC grade M25 is a concrete mix design ratio used in construction.
RCC stands for Reinforced Cement Concrete.
M25 is the compressive strength of the concrete after 28 days of curing.
The mix design ratio for M25 is 1:1:2 (cement:sand:aggregate).
It is commonly used in the construction of buildings, bridges, and other structures.
M25 grade concrete is suitable for moderate exposure conditions.
HCC Infrastructure Interview Experiences
19 interviews found
Anonymous
- Q1. How to work then fail the plan
- Ans.
Reassess the situation, identify what went wrong and create a new plan or adjust existing.
- Q2. Any project is budget low and how to effectively complete
- Ans.
Managing a low-budget project requires strategic planning, resource optimization, and effective communication to ensure successful completion.
Prioritize project tasks: Focus on critical tasks that deliver the most value. For example, use the MoSCoW method to categorize tasks.
Leverage existing resources: Utilize in-house skills and tools to minimize costs. For instance, if your team has design expertise, use them instea...
- Q3. How to manage labour and materials
- Ans.
Effective management of labor and materials ensures project efficiency, cost control, and timely completion.
Plan resource allocation: Assess project needs and allocate labor and materials accordingly.
Use project management software: Tools like MS Project or Trello can help track labor hours and material usage.
Implement just-in-time inventory: Reduce waste by ordering materials as needed, minimizing storage costs.
Conduc...
- Q4. How to solve problems
- Ans.
Effective problem-solving involves identifying issues, analyzing options, and implementing solutions systematically.
Define the problem clearly: For example, if a project is behind schedule, specify the reasons such as resource allocation or unforeseen delays.
Gather relevant information: Collect data from team members, project reports, and stakeholder feedback to understand the context.
Analyze potential solutions: Evalu...
- Q5. How to maintain quality
- Ans.
Maintaining quality involves systematic processes, adherence to standards, and continuous improvement to ensure project success.
Implement a quality management system (QMS) to standardize processes and ensure compliance.
Conduct regular training sessions for team members to keep them updated on best practices.
Utilize quality control tools like Six Sigma or Lean methodologies to identify and eliminate defects.
Perform regu...
Selected
I applied via Naukri.com and was interviewed in Jul 2024. There was 1 interview round.
(2 Questions)
- Q1. Experience details.
- Q2. Joining condition
Interview Preparation Tips
Selected
I applied via Job Portal and was interviewed in Aug 2023. There were 3 interview rounds.
(2 Questions)
- Q1. Minimum cement contains in RCC structure
- Ans.
The minimum cement content in RCC structure is typically around 300 kg/m3.
Minimum cement content is usually specified by structural engineers based on design requirements.
Higher cement content may be required for structures in aggressive environments or with special design considerations.
The minimum cement content is important for achieving the desired strength and durability of the concrete mix.
- Q2. In slump cone test what is the shape of slump
- Ans.
The shape of slump in a slump cone test is typically conical.
The shape of slump is conical, with the top being wider than the base.
The height of the slump is measured to determine the workability of the concrete.
Different types of slumps (true slump, shear slump, collapse slump) indicate different levels of workability.
Example: A true slump has a smooth, symmetrical shape with a slight collapse at the center.
(1 Question)
- Q1. Lapping zone of column
- Ans.
Lapping zone of column is where two reinforcement bars overlap to ensure continuity of load transfer.
Lapping zone should be at least 50 times the diameter of the smaller bar away from the face of the support.
Proper lapping length is crucial for structural integrity and load distribution.
Lapping should be staggered in multiple layers for better strength.
Ensure proper cover and clear spacing around the lapping zone to pr...
Selected
I appeared for an interview before Apr 2024, where I was asked the following questions.
- Q1. Technical experience
- Q2. Willing to travel
Selected
I applied via Company Website and was interviewed in Aug 2023. There was 1 interview round.
(3 Questions)
- Q1. Cement ka grade
- Ans.
Cement grades indicate the strength and quality of cement, essential for construction projects.
Cement grades are classified based on their compressive strength, measured in megapascals (MPa).
Common grades include 33, 43, and 53, with 53 being the highest strength cement.
Grade 33 is suitable for general construction, while Grade 53 is used for high-strength applications.
Higher grade cement allows for thinner structures ...
- Q2. Cancrete M20 retio
- Ans.
M20 concrete mix ratio is 1:1.5:3, indicating 1 part cement, 1.5 parts sand, and 3 parts aggregate by volume.
M20 concrete is a nominal mix with a characteristic compressive strength of 20 MPa.
The mix ratio of 1:1.5:3 is commonly used for medium-strength structures.
For example, in a 1 cubic meter mix, you would use approximately 400 kg of cement, 600 kg of sand, and 1200 kg of aggregate.
Water-cement ratio is crucial; ty...
- Q3. What is tha water cement ratio
- Ans.
Water cement ratio is the ratio of the weight of water to the weight of cement used in a concrete mix.
Water cement ratio affects the strength and durability of concrete.
Lower water cement ratio results in stronger concrete but may be difficult to work with.
Typical water cement ratio ranges from 0.4 to 0.6 for normal strength concrete.
Excess water can lead to lower strength and durability of concrete.
Interview Preparation Tips
Request company
Sachin Aswal
(3 Questions)
- Q1. Civil engineering
- Q2. QA/QC CIVIL ENGINEER
- Q3. Concrete and bitumen
Interview Preparation Tips
I am from uttrakhand
I am completely 12th - 2028 and completely diploma 2021
md Muzammil
(2 Questions)
- Q1. Question about past experiences
- Q2. Salary expectations
(2 Questions)
- Q1. Questions related to previous job roles and responsibilities
- Q2. Questions about the the Designation you are interviewing for
Interview Preparation Tips
Good luck
Selected
I applied via Naukri.com and was interviewed in Sep 2022. There were 3 interview rounds.
Duration = 30 mins topic:- civil engg basics
(3 Questions)
- Q1. ALL QUESTIONS RELATED TO CIVIL ENGG BASICS
- Q2. VOLUME OF CEMENT IN LITERS OR M^3
- Ans.
The volume of cement can be calculated in liters or cubic meters.
The volume of cement is calculated by multiplying the area of the surface to be covered by the thickness of the cement layer.
The volume of cement can be calculated in liters by converting the cubic meters to liters.
For example, if the area to be covered is 10 square meters and the thickness of the cement layer is 0.1 meters, then the volume of cement requ...
- Q3. QUESTIONS BASED ON YOUR FAVORITE SUBJECT
(2 Questions)
- Q1. RATE THE INTERVIEW FROM 1-10
- Q2. GIVE REASON FOR YOUR RATING
Interview Preparation Tips
I applied via Approached by Company and was interviewed in Aug 2022. There were 5 interview rounds.
(1 Question)
- Q1. About myself and salary expectations.... And the further proceedings
(7 Questions)
- Q1. Questions from IS Code 1200
- Q2. All construction materials watage percentages
- Ans.
The wastage percentages of construction materials vary depending on the type of material and the project requirements.
Wastage percentages can range from 2-5% for cement and steel to 10-15% for bricks and tiles.
Factors that affect wastage include the skill level of workers, the quality of materials, and the complexity of the project.
Proper planning and management can help minimize wastage and reduce project costs.
Regula...
- Q3. Rolling margin of steel
- Ans.
Rolling margin of steel is the difference between the cost of producing steel and the selling price.
It is a measure of profitability for steel manufacturers.
It is calculated by subtracting the cost of production from the selling price.
A higher rolling margin indicates higher profitability.
Factors that affect rolling margin include raw material costs, energy costs, and market demand.
- Q4. Worker productivity and machinaries productivity for planning
- Ans.
Worker and machinery productivity are crucial for effective planning.
Worker productivity can be measured by the amount of work completed in a given time period.
Machinery productivity can be measured by the amount of output produced by the machinery in a given time period.
Both worker and machinery productivity should be taken into account when planning to ensure efficient use of resources.
For example, if workers are mor...
- Q5. About my previous employment roles and responsibilities
- Q6. List of deductions in client bill
- Ans.
Deductions in client bill include taxes, discounts, late fees, and service charges.
Taxes: Sales tax, VAT, GST, etc.
Discounts: Promotions, loyalty rewards, bulk discounts, etc.
Late fees: Charges for overdue payments.
Service charges: Fees for additional services provided.
- Q7. Retention and TDS in sub con bill
- Ans.
Retention and TDS are important factors to consider in subcontractor billing.
Retention refers to the amount of money withheld by the client as a form of security against any defects or issues that may arise after the project is completed.
TDS (Tax Deducted at Source) is the tax deducted by the client from the subcontractor's payment and deposited with the government.
Both retention and TDS should be clearly mentioned in ...
(1 Question)
- Q1. It was happened with site Site personal and questions are so basics
(1 Question)
- Q1. Salary negotiation and decission about all benefits
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed before Jul 2022. There were 4 interview rounds.
(2 Questions)
- Q1. This was a technical question
- Q2. This was second round from RM
(1 Question)
- Q1. There was no more questions
(2 Questions)
- Q1. This was a HR round
- Q2. This was a final round
Top trending discussions
HCC Infrastructure Interview FAQs
The duration of HCC Infrastructure interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
HCC Infrastructure Interviews By Designations
- HCC Infrastructure Site Engineer Interview Questions
- HCC Infrastructure Planning Engineer Interview Questions
- HCC Infrastructure Contract Engineer Interview Questions
- HCC Infrastructure Senior Engineer Interview Questions
- HCC Infrastructure Deputy Manager - Finance Interview Questions
- HCC Infrastructure Assistant Manager/Manager -(Technical) Interview Questions
- HCC Infrastructure Project Manager Civil Interview Questions
- HCC Infrastructure Project Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 22 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
HCC Infrastructure Reviews and Ratings
based on 78 reviews
Rating in categories
|
Civil Site Engineer
16
salaries
|  ₹2.9 L/yr - ₹5.8 L/yr |
|
Civil Engineer
13
salaries
| ₹2.4 L/yr - ₹6.5 L/yr |
|
Senior Legal Officer
6
salaries
| ₹9 L/yr - ₹18 L/yr |
|
Senior Engineer
6
salaries
| ₹6.8 L/yr - ₹11.4 L/yr |
|
Site Engineer
6
salaries
| ₹3.2 L/yr - ₹4.5 L/yr |
L&T Construction
Simplex Infrastructures
ITD Cementation India
Ashoka Buildcon
- Home >
- Interviews >
- HCC Infrastructure Interview Questions
