Upload Button Icon Add office photos

Highway Industries

Compare button icon Compare button icon Compare

Filter interviews by

Highway Industries Senior Engineer Interview Questions and Answers

Updated 17 Mar 2025

Highway Industries Senior Engineer Interview Experiences

3 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Feb 2025, where I was asked the following questions.

  • Q1. 7 qc tools , graph reading, drawing knowledge
  • Q2. What about spc , msa, product Audit, Process audit, layout
  • Ans. 

    SPC, MSA, product/process audits, and layout are essential for quality control and process improvement in engineering.

    • SPC (Statistical Process Control) uses statistical methods to monitor and control a process, ensuring it operates at its full potential.

    • MSA (Measurement System Analysis) evaluates the accuracy and precision of measurement systems, crucial for reliable data collection.

    • Product audits assess the final prod...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. Question would be based on applied post
Round 2 - HR 

(1 Question)

  • Q1. Regarding previous salary

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and give answer honestly

Senior Engineer Interview Questions Asked at Other Companies

Q1. What does the 'M' signify in M20, M25, and M30 grades of concrete ... read more
asked in Nagarro
Q2. Write a program that takes an integer N and an array of integers ... read more
asked in Tata Elxsi
Q3. What is Quality Assurance. Difference between Quality assurance a ... read more
Q4. Is it possible to work with multiple threads in core data? If so, ... read more
Q5. When would you perform a half or full engine overhaul?

I applied via Referral and was interviewed before Mar 2019. There were 2 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. How defect generation , What is scada , What is autonomous Maintenance, How productivity can be improved
  • Ans. 

    Defect generation, SCADA, autonomous maintenance, and productivity improvement are key topics in the interview for Senior Engineer.

    • Defect generation refers to the process of identifying and categorizing defects in a product or system.

    • SCADA stands for Supervisory Control and Data Acquisition, which is a system used to monitor and control industrial processes.

    • Autonomous Maintenance is a concept in Lean Manufacturing wher...

  • Answered by AI
  • Q2. 5’s , 7qc tools , Manpower management , Forging defect

Top trending discussions

View All
Interview Hub
1w (edited)
anshitanegi
·
ex -
Planet Spark
When HR’s Chinese English made me drop the interview!
So, I talked to the HR yesterday about the interview. I asked Please send me the location But their English… bro I was shocked! It was like talking to someone jisne english nahi kuch ar hi seekh liya ho, if the HR’s English is this I can only imagine the rest of the company I decided to drop the interview with this chinese english😶‍🌫️
FeedCard Image
Got a question about Highway Industries?
Ask anonymously on communities.

Interview questions from similar companies

I applied via Walk-in and was interviewed before Apr 2020. There was 1 interview round.

Interview Questionnaire 

6 Questions

  • Q1. Can you explain Man day
  • Ans. 

    A man day is a unit of measure representing the amount of work one person can complete in a single day.

    • Typically used in project management to estimate labor costs and timelines.

    • One man day usually equals 8 hours of work.

    • For example, if a task requires 40 man days, it would take one person 40 days or 5 people 8 days to complete.

    • Helps in resource allocation and planning for projects.

  • Answered by AI
  • Q2. Can you explain manpower mobilization.
  • Ans. 

    Manpower mobilization refers to the process of deploying and managing personnel for a specific project or task.

    • Identifying the required personnel for a project

    • Recruiting and hiring personnel

    • Training and orienting personnel to the project

    • Assigning roles and responsibilities to personnel

    • Managing personnel performance and productivity

    • Ensuring compliance with labor laws and regulations

    • Examples include mobilizing a construc...

  • Answered by AI
  • Q3. How to cost control in project
  • Ans. 

    Cost control in project can be achieved through effective planning, monitoring and controlling of project expenses.

    • Create a detailed project budget and stick to it

    • Track expenses regularly and adjust budget as needed

    • Identify and eliminate unnecessary expenses

    • Negotiate with vendors for better pricing

    • Implement cost-saving measures without compromising quality

    • Use project management tools to monitor expenses and progress

    • Reg...

  • Answered by AI
  • Q4. Can you explain how to handle clinent
  • Ans. 

    Handling clients requires effective communication, understanding their needs, and providing timely solutions.

    • Listen actively to their concerns and requirements

    • Communicate clearly and professionally

    • Provide timely updates and solutions

    • Build a strong relationship based on trust and respect

    • Be proactive in identifying and addressing potential issues

    • Ensure customer satisfaction by going above and beyond expectations

  • Answered by AI
  • Q5. Flow chart for manpower mobilization
  • Ans. 

    Manpower mobilization flow chart involves identifying needs, planning, recruitment, training, and deployment.

    • Identify the need for manpower

    • Plan the recruitment process

    • Source and screen candidates

    • Conduct interviews and assessments

    • Select and hire candidates

    • Provide training and orientation

    • Deploy manpower to required locations

  • Answered by AI
  • Q6. Prepared organisation chat for project handling

Interview Preparation Tips

Interview preparation tips for other job seekers - Please see all questions

I applied via Company Website and was interviewed before Sep 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. They asked for previous company work management, work culture, work timing & some technical questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Its not so difficult
Just share your work experience

Interview Questionnaire 

1 Question

  • Q1. Hard core techanical

Highway Industries HR Interview Questions

4 questions and answers

Q. Tell me about your relevant work experience.
Q. Please provide a personal introduction.
Q. What is your profile, experience, expected salary?
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. What are your strengths and weaknesses?
Round 3 - Technical 
Round 4 - Technical 
Round 5 - Technical 
Round 6 - One-on-one 

Interview Preparation Tips

Interview preparation tips for other job seekers - Reference not accept
Are these interview questions helpful?

I applied via Referral and was interviewed in Dec 2020. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Cube Compressive achieving Percentage time periods?
  • Ans. 

    Cube compressive achieving percentage time periods

    • The question is asking about the percentage of time periods in which cube compressive strength is achieved

    • Cube compressive strength refers to the ability of a cube-shaped material to withstand compression

    • The answer may involve calculating the percentage of time periods in which the cube meets the required compressive strength

    • Examples of data points needed: time periods,...

  • Answered by AI
  • Q2. M20 grade and M means and 20 means and unit
  • Q3. 1:1.5:3 ,M-Mix,20 -Compresive strength,N/mm²

Interview Preparation Tips

Interview preparation tips for other job seekers - Be face Bolt don't jerk anyone becoz they also Human
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Jul 2024, where I was asked the following questions.

  • Q1. Can you provide a formal introduction and explain why you should be hired?
  • Ans. 

    Experienced Senior Engineer with a proven track record in innovative solutions and team leadership, ready to drive success in your organization.

    • Over 10 years of experience in software development, leading projects from conception to deployment.

    • Successfully managed a team of 5 engineers, improving project delivery time by 30% through agile methodologies.

    • Developed a scalable application that increased user engagement by ...

  • Answered by AI
  • Q2. What is the significance of IS CODE in the context of erection and fabrication?
  • Ans. 

    IS CODE ensures standardization, safety, and quality in erection and fabrication processes across various engineering sectors.

    • Standardization: IS CODE provides uniform guidelines for materials and processes, ensuring consistency in quality.

    • Safety: Compliance with IS CODE helps in minimizing risks associated with structural failures during erection.

    • Quality Assurance: Adhering to IS CODE ensures that the fabricated compo...

  • Answered by AI
  • Q3. What kind of checklist do you follow when constructing a Pre-Engineered Building (PEB)?
  • Ans. 

    A comprehensive checklist ensures quality and efficiency in constructing Pre-Engineered Buildings (PEBs).

    • Site Assessment: Evaluate soil conditions and topography to determine foundation requirements.

    • Design Review: Ensure all architectural and structural designs meet local codes and client specifications.

    • Material Selection: Choose appropriate materials (e.g., steel grades) based on load requirements and environmental fa...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
-

I appeared for an interview in Apr 2024.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Control Valve sizing
  • Q2. Flowmeter selection
Round 2 - HR 

(2 Questions)

  • Q1. Reason for shifting
  • Ans. 

    I shifted to pursue new opportunities for growth and development in my career.

    • Seeking new challenges and responsibilities

    • Exploring different industries or technologies

    • Relocation for personal reasons or family commitments

  • Answered by AI
  • Q2. Expected salary

Highway Industries Interview FAQs

How many rounds are there in Highway Industries Senior Engineer interview?
Highway Industries interview process usually has 3 rounds. The most common rounds in the Highway Industries interview process are Resume Shortlist, One-on-one Round and HR.
What are the top questions asked in Highway Industries Senior Engineer interview?

Some of the top questions asked at the Highway Industries Senior Engineer interview -

  1. How defect generation , What is scada , What is autonomous Maintenance, How pro...read more
  2. What about spc , msa, product Audit, Process audit, lay...read more
  3. Question would be based on applied p...read more

Tell us how to improve this page.

Overall Interview Experience Rating

4.5/5

based on 2 interview experiences

Difficulty level

Moderate 100%

Duration

Less than 2 weeks 100%
View more
Highway Industries Senior Engineer Salary
based on 58 salaries
₹3 L/yr - ₹6 L/yr
52% less than the average Senior Engineer Salary in India
View more details

Highway Industries Senior Engineer Reviews and Ratings

based on 18 reviews

4.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

3.7

Salary

4.2

Job security

3.7

Company culture

3.4

Promotions

3.9

Work satisfaction

Explore 18 Reviews and Ratings
Quality Engineer
83 salaries
unlock blur

₹1.7 L/yr - ₹4.8 L/yr

Engineer
68 salaries
unlock blur

₹2 L/yr - ₹4.9 L/yr

Senior Engineer
58 salaries
unlock blur

₹3 L/yr - ₹6 L/yr

Production Engineer
51 salaries
unlock blur

₹2.3 L/yr - ₹6 L/yr

Assistant Manager
48 salaries
unlock blur

₹4.2 L/yr - ₹8.5 L/yr

Explore more salaries
Compare Highway Industries with

L&T Energy Hydrocarbon

3.8
Compare

AECOM

4.2
Compare

Sterling & Wilson

4.1
Compare

Apco Infratech

3.7
Compare
write
Share an Interview