Premium Employer

i

This company page is being actively managed by Intertek Team. If you also belong to the team, you can get access from here

Intertek Verified Tick Work with us arrow

Compare button icon Compare button icon Compare

Filter interviews by

Intertek Interview Questions and Answers

Updated 21 Jun 2025
Popular Designations

23 Interview questions

🔥 Asked by recruiter 2 times
An Inspection Engineer was asked
Q. What are the different types of valves and their functions?
Ans. 

Valves are devices used to control the flow of fluids or gases in a system.

  • Gate valve: used to start or stop the flow of fluid by lifting or lowering a gate

  • Ball valve: uses a rotating ball with a hole to control the flow

  • Check valve: allows flow in one direction and prevents backflow

  • Globe valve: controls flow by raising or lowering a disc against the flow

  • Butterfly valve: uses a disc to control flow by rotating it

View all Inspection Engineer interview questions
An Inspection Engineer was asked
Q. What type of fitting is used during charging?
Ans. 

Fittings used during charging depend on the type of refrigerant and system design.

  • The type of refrigerant and system design determine the fittings used during charging.

  • Common fittings include flare, sweat, and quick-connect fittings.

  • Flare fittings are commonly used in air conditioning systems.

  • Sweat fittings are commonly used in refrigeration systems.

  • Quick-connect fittings are commonly used in automotive air condit...

View all Inspection Engineer interview questions
An Inspection Engineer was asked
Q. What data is required for fire and safety inspections?
Ans. 

Data required for fire & safety

  • Building layout and floor plans

  • Location of fire exits and emergency equipment

  • Fire suppression systems and equipment

  • Fire alarm and detection systems

  • Emergency response plan and procedures

View all Inspection Engineer interview questions
An Inspection Engineer was asked
Q. What is the required depth for IGL gas laying?
Ans. 

The depth required for IGL gas laying depends on various factors such as soil type, traffic load, and depth of other utilities.

  • The depth should be sufficient to prevent damage from external factors such as traffic load and soil type.

  • The depth should also be deep enough to avoid interference with other utilities.

  • The depth requirement may vary depending on the location and local regulations.

  • For example, in Delhi, th...

View all Inspection Engineer interview questions
A senior microbilogist was asked 10mo ago
Q. What do you about nabl lab Iso methods
Ans. 

NABL lab ISO methods are internationally recognized standards for testing and calibration laboratories.

  • NABL stands for National Accreditation Board for Testing and Calibration Laboratories

  • ISO methods ensure quality and reliability of testing procedures

  • Compliance with ISO methods is essential for accreditation and recognition

  • Examples of ISO methods include ISO 17025 for testing laboratories and ISO 15189 for medica...

A Construction Engineer (utility, piping and equipment) was asked
Q. Types of pipe, what is wps, difference between garade A53 and A106, process of hydrotest and pneometic test, what is ndt, one weldor productivity in one day, one day erection on one day, what is jsa
Ans. 

Types of pipes include steel, copper, PVC; WPS stands for Welding Procedure Specification; A53 is for low pressure, A106 is for high pressure; Hydrotest uses water, pneumatic test uses air; NDT is Non-Destructive Testing; JSA is Job Safety Analysis.

  • Types of pipes: steel, copper, PVC

  • WPS: Welding Procedure Specification

  • Difference between A53 and A106: A53 for low pressure, A106 for high pressure

  • Process of hydrotest:...

An Inspection Engineer was asked
Q. Q. QAP, WPS and DFT description?
Ans. 

QAP, WPS, and DFT are important documents used in inspection engineering.

  • QAP stands for Quality Assurance Plan, which outlines the procedures and requirements for ensuring quality in a project or process.

  • WPS stands for Welding Procedure Specification, which provides detailed instructions for performing welding operations.

  • DFT stands for Dry Film Thickness, which refers to the thickness of a coating or paint applied...

View all Inspection Engineer interview questions
Are these interview questions helpful?
A Safety Officer was asked 10mo ago
Q. Type of fire extinguisher
Ans. 

There are different types of fire extinguishers for different types of fires, such as Class A, B, C, D, and K.

  • Class A fire extinguishers are for ordinary combustibles like wood and paper.

  • Class B fire extinguishers are for flammable liquids like gasoline and oil.

  • Class C fire extinguishers are for electrical fires.

  • Class D fire extinguishers are for flammable metals.

  • Class K fire extinguishers are for kitchen fires in...

View all Safety Officer interview questions
A Quality Executive was asked
Q. Loading unloading weight quantity and quality
Ans. 

Loading, unloading weight quantity, and quality are important factors in ensuring product integrity.

  • Loading and unloading processes should be carefully monitored to prevent damage to the products.

  • Weight verification should be conducted to ensure accurate quantity of goods.

  • Quality checks should be performed to ensure that the products meet the required standards.

  • Examples: using weighing scales to measure the weight...

View all Quality Executive interview questions
A Senior Inspection Engineer was asked
Q. Defect of welding
Ans. 

Defects in welding can compromise the integrity of the joint and lead to structural failures.

  • Common welding defects include porosity, lack of fusion, cracks, and undercutting.

  • Porosity is caused by gas entrapment during the welding process.

  • Lack of fusion occurs when the weld metal fails to fuse with the base metal.

  • Cracks can result from excessive stress or improper cooling of the weld.

  • Undercutting is a groove forma...

View all Senior Inspection Engineer interview questions

Intertek Interview Experiences

60 interviews found

Interview Questions & Answers

user image Sulthana Parveen

posted on 24 Oct 2024

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - One-on-one 

(2 Questions)

  • Q1. Convert gallon (us) to litre
  • Q2. What is the standard drying conditions
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Community cloud
  • Q2. Batch apex and future
Round 2 - Coding Test 

Lwc senario and design need to tell verbilly

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview in Feb 2025.

Round 1 - HR 

(1 Question)

  • Q1. Can you share your educational journey and learning experiences?
  • Ans. 

    My educational journey has been a blend of academic rigor and practical experiences, shaping my skills and passion for learning.

    • Completed a Bachelor's degree in Computer Science, where I developed a strong foundation in programming and algorithms.

    • Participated in various coding competitions, enhancing my problem-solving skills and teamwork abilities.

    • Interned at a tech startup, gaining hands-on experience in software dev...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This is a very good company for developing skills and gaining ample learning opportunities.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Not Selected

I appeared for an interview in Dec 2024.

Round 1 - Technical 

(1 Question)

  • Q1. Explore to R2R and sun system

Interview Preparation Tips

Interview preparation tips for other job seekers - The experience has been good

Interview Questions & Answers

user image Rajani jangal

posted on 10 Aug 2024

Interview experience
4
Good
Difficulty level
Easy
Process Duration
-
Result
Selected Selected

I appeared for an interview in Jul 2024.

Round 1 - One-on-one 

(2 Questions)

  • Q1. What do you about nabl lab Iso methods
  • Ans. 

    NABL lab ISO methods are internationally recognized standards for testing and calibration laboratories.

    • NABL stands for National Accreditation Board for Testing and Calibration Laboratories

    • ISO methods ensure quality and reliability of testing procedures

    • Compliance with ISO methods is essential for accreditation and recognition

    • Examples of ISO methods include ISO 17025 for testing laboratories and ISO 15189 for medical lab...

  • Answered by AI
  • Q2. Is method food analysis
  • Ans. 

    Method food analysis involves using various techniques to analyze the composition and quality of food products.

    • Method food analysis includes techniques such as chromatography, spectroscopy, and microbiological testing.

    • It helps in determining the nutritional content, presence of contaminants, and overall quality of food products.

    • Examples of method food analysis include testing for pesticide residues in fruits and vegeta...

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. How much your expected ctc
  • Q2. Introduction yourself
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Dec 2023. There were 5 interview rounds.

Round 1 - Aptitude Test 

I'm simply and hard worker.

Round 2 - HR 

(3 Questions)

  • Q1. Experience commodity
  • Ans. 13 years experience of grains analysis quality and quantity control
  • Answered Anonymously
  • Q2. Loading unloading weight quantity and quality
  • Ans. 

    Loading, unloading weight quantity, and quality are important factors in ensuring product integrity.

    • Loading and unloading processes should be carefully monitored to prevent damage to the products.

    • Weight verification should be conducted to ensure accurate quantity of goods.

    • Quality checks should be performed to ensure that the products meet the required standards.

    • Examples: using weighing scales to measure the weight of g...

  • Answered by AI
  • Q3. Wearhouse work stock loading unloading weight Operations Rake all commodity
Round 3 - Technical 

(3 Questions)

  • Q1. Time and Reporting
  • Q2. Time and Reporting should must
  • Ans. 

    As per requirement opening closing stock date wise must

  • Answered Anonymously
  • Q3. Wearhouse work stock loading unloading weight quantity and quality ,Wearhouse equipment management emergency equipment
  • Ans. 

    Timming attendance stock date wise Wearhouse equipment management PB opening closing

  • Answered Anonymously
Round 4 - One-on-one 

(1 Question)

  • Q1. What is work our company
Round 5 - Group Discussion 

Planning for job work as per 3rd party
Operation Reporting details of commodities stock date location attend person date wise

Interview Preparation Tips

Interview preparation tips for other job seekers - I have experience 13 years of grains analysis quality and quantity management Wearhouse work stock loading unloading weight and Operations,
Operation Reporting date location attend person date wise must stocks

Summer Intern Interview Questions & Answers

user image Anonymous

posted on 26 May 2025

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Nov 2024, where I was asked the following questions.

  • Q1. Could you provide an overview of your background and experiences?
  • Ans. 

    I have a diverse background in computer science, internships in software development, and a passion for innovative technology solutions.

    • Completed a Bachelor's degree in Computer Science with a focus on software engineering.

    • Interned at XYZ Corp, where I developed a web application that improved user engagement by 30%.

    • Participated in hackathons, winning first place for creating an AI-driven chatbot.

    • Volunteered at a local...

  • Answered by AI
  • Q2. How do you envision your role at Intertek?
  • Ans. 

    I envision my role at Intertek as a proactive contributor to quality assurance and innovation in testing and certification processes.

    • Collaborate with cross-functional teams to ensure compliance with industry standards, such as ISO and ASTM.

    • Assist in conducting tests and evaluations on products, ensuring they meet safety and performance criteria.

    • Engage in continuous learning about emerging technologies and methodologies...

  • Answered by AI
  • Q3. What were your key takeaways from Mr. Andre's book on Leadership with Soul session and his book?
  • Ans. 

    Mr. Andre's insights emphasize authentic leadership, emotional intelligence, and the importance of purpose in guiding teams.

    • Authenticity is crucial: Leaders should be true to themselves and their values, fostering trust within their teams.

    • Emotional intelligence matters: Understanding and managing emotions can enhance team dynamics and decision-making.

    • Purpose-driven leadership: A clear vision and purpose can inspire and...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I appeared for an interview in Dec 2024.

Round 1 - HR 

(1 Question)

  • Q1. Do you have experience in microbiology?
  • Ans. 

    Yes, I have experience in microbiology including laboratory work, microbial identification, and food safety protocols.

    • Experience in conducting microbiological tests in a laboratory setting

    • Knowledge of microbial identification techniques such as PCR and sequencing

    • Understanding of food safety protocols and regulations

    • Experience in analyzing microbiological data and interpreting results

    • Ability to troubleshoot microbiologi...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - The interview process was well-structured.

Assistant Manager Interview Questions & Answers

user image Nupur Subhasini

posted on 20 Mar 2025

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

Interview Questionnaire 

2 Questions

  • Q1. Process and questions related to CSR laws
  • Q2. Are able to work for Sustainability Thematic Area
  • Ans. 

    I am committed to promoting sustainability through innovative practices and community engagement.

    • Experience in developing sustainability initiatives, such as reducing waste in previous roles.

    • Implemented energy-efficient practices that led to a 20% reduction in operational costs.

    • Collaborated with local organizations to promote environmental awareness and community clean-up events.

    • Skilled in analyzing sustainability metr...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Sep 2024, where I was asked the following questions.

  • Q1. What motivates you at work ?
  • Ans. 

    I am motivated by challenges, collaboration, and the opportunity to make a meaningful impact in my role.

    • I thrive on challenges, such as managing complex schedules and prioritizing tasks effectively.

    • Collaboration with team members energizes me, as I enjoy brainstorming and sharing ideas to improve processes.

    • I find motivation in contributing to the success of the organization, like organizing events that enhance team mor...

  • Answered by AI
  • Q2. Any wrong decision that you made recently ?
  • Ans. 

    I recently mismanaged my time on a project, leading to delays in deliverables and impacting team productivity.

    • Underestimated the time required for a project, resulting in a rushed final product.

    • Failed to communicate effectively with team members about deadlines, causing confusion.

    • Did not prioritize tasks properly, which led to missing a critical deadline for a client presentation.

  • Answered by AI
  • Q3. How you are as a person ?
  • Ans. 

    I am a proactive, detail-oriented individual who thrives in dynamic environments and values collaboration and effective communication.

    • I am highly organized, often using tools like Trello and Google Calendar to manage tasks and deadlines efficiently.

    • I have strong communication skills, demonstrated by my experience in coordinating meetings and liaising between departments.

    • I am adaptable and thrive under pressure, as seen...

  • Answered by AI

Top trending discussions

View All
Interview Tips & Stories
1w
toobluntforu
·
works at
Cvent
Can speak English, can’t deliver in interviews
I feel like I can't speak fluently during interviews. I do know english well and use it daily to communicate, but the moment I'm in an interview, I just get stuck. since it's not my first language, I struggle to express what I actually feel. I know the answer in my head, but I just can’t deliver it properly at that moment. Please guide me
Got a question about Intertek?
Ask anonymously on communities.

Intertek Interview FAQs

How many rounds are there in Intertek interview?
Intertek interview process usually has 1-2 rounds. The most common rounds in the Intertek interview process are HR, Technical and Resume Shortlist.
How to prepare for Intertek interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Intertek. The most common topics and skills that interviewers at Intertek expect are Inspection Engineering, Site Engineering, Quality Control, Civil Engineering and Quality Inspection.
What are the top questions asked in Intertek interview?

Some of the top questions asked at the Intertek interview -

  1. Types of pipe, what is wps, difference between garade A53 and A106, process of ...read more
  2. What is depth required fir igl has lay...read more
  3. Q. What is represented by W,H,R,P and...read more
How long is the Intertek interview process?

The duration of Intertek interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

Overall Interview Experience Rating

4/5

based on 68 interview experiences

Difficulty level

Easy 14%
Moderate 71%
Hard 14%

Duration

Less than 2 weeks 67%
2-4 weeks 19%
4-6 weeks 11%
6-8 weeks 4%
View more
Join Intertek Total Quality. Assured.

Interview Questions from Similar Companies

Bureau Veritas Interview Questions
3.8
 • 123 Interviews
TÜV NORD Interview Questions
3.8
 • 70 Interviews
CMS Infosystems Interview Questions
3.6
 • 62 Interviews
Cashify Interview Questions
3.8
 • 44 Interviews
Titan Eye Plus Interview Questions
4.2
 • 32 Interviews
Reliance Group Interview Questions
4.2
 • 20 Interviews
Gold Plus Glass Interview Questions
3.5
 • 18 Interviews
View all

Intertek Reviews and Ratings

based on 1.1k reviews

3.7/5

Rating in categories

3.4

Skill development

3.5

Work-life balance

3.4

Salary

3.5

Job security

3.5

Company culture

2.9

Promotions

3.4

Work satisfaction

Explore 1.1k Reviews and Ratings
Analyst/Sr. Analyst

Gurgaon / Gurugram

2-5 Yrs

₹ 3.15-5.5 LPA

Operations Intern

Hyderabad / Secunderabad

0-1 Yrs

Not Disclosed

GTW Auditor

Bangalore / Bengaluru,

Delhi/Ncr

3-5 Yrs

Not Disclosed

Explore more jobs
Inspection Engineer
260 salaries
unlock blur

₹2.2 L/yr - ₹9 L/yr

Lab Technician
167 salaries
unlock blur

₹1.8 L/yr - ₹4.3 L/yr

Quality Engineer
152 salaries
unlock blur

₹2.1 L/yr - ₹7 L/yr

Chemist
71 salaries
unlock blur

₹2 L/yr - ₹5 L/yr

Assistant Manager
55 salaries
unlock blur

₹4.7 L/yr - ₹12 L/yr

Explore more salaries
Compare Intertek with

Bureau Veritas

3.9
Compare

CMS Infosystems

3.6
Compare

TÜV NORD

3.8
Compare

Medhaj Techno Concept

3.9
Compare
write
Share an Interview