AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Jindal Steel and Power Interview Questions and Answers
258 Interview questions
QA/QC Engineers ensure product quality through systematic testing, inspections, and adherence to standards.
Develop and implement quality assurance processes to ensure compliance with industry standards.
Conduct regular inspections and audits to identify defects and areas for improvement.
Create and maintain documentation related to quality control procedures and test results.
Collaborate with cross-functional teams t...
I have extensive knowledge of SAP transactions, including their functions, navigation, and impact on business processes.
Familiar with key transactions like ME21N (Create Purchase Order) and VA01 (Create Sales Order).
Understand the importance of transaction codes (T-codes) for efficient navigation.
Experience in using SAP modules such as MM (Materials Management) and SD (Sales and Distribution).
Knowledge of reportin...
Index ratio is a financial metric used to compare a company's performance against a benchmark or index.
Index ratio is calculated by dividing the company's performance measure (like revenue) by the benchmark's measure.
For example, if a company's revenue growth is 10% and the industry average is 5%, the index ratio is 2.0.
An index ratio greater than 1 indicates outperformance, while less than 1 indicates underperfor...
Tripping logic for vertical stand pumps involves safety mechanisms to prevent failures and ensure operational efficiency.
1. Overcurrent Protection: Pumps can trip if the current exceeds a set limit, indicating a potential blockage or mechanical failure.
2. Low Level Cutoff: If the scale pit water level drops below a certain point, the pump will trip to prevent dry running.
3. High Temperature Shutdown: Pumps may tri...
What people are saying about Jindal Steel and Power
Supply chain management (SCM) involves overseeing the flow of goods, information, and finances from suppliers to customers.
1. Planning: Developing strategies for sourcing, production, and distribution. Example: A company forecasting demand for a new product.
2. Sourcing: Selecting suppliers for raw materials and negotiating contracts. Example: A manufacturer choosing between multiple suppliers for cost efficiency.
3...
Mining lines refer to the various methods and techniques used in the extraction of minerals and resources from the earth.
Open-pit mining: Involves removing large quantities of soil and rock to access minerals, e.g., copper or gold.
Underground mining: Used for deeper deposits, where shafts and tunnels are created, e.g., coal or diamond mining.
Placer mining: Involves extracting minerals from alluvial deposits, often...
Emergency leave is a type of leave granted for urgent, unforeseen circumstances requiring immediate attention.
Typically used for personal emergencies, such as a family member's illness.
Can also apply to situations like natural disasters affecting the employee's home.
Employers usually require notification and may ask for documentation.
Example: Taking emergency leave to care for a child who has been hospitalized.
SOP stands for Standard Operating Procedure, a set of step-by-step instructions to help workers carry out routine operations.
SOPs ensure consistency and quality in operations, such as in manufacturing processes.
They provide clear guidelines for safety protocols, like emergency evacuation procedures.
SOPs can be used for training new employees, ensuring they understand their tasks.
For example, a maintenance SOP migh...
Various methods like gravity separation, centrifugation, and filtration can effectively separate water from oil.
Gravity Separation: Utilizes the difference in density between oil and water; oil floats on top.
Centrifugation: Employs centrifugal force to separate water from oil based on density differences.
Filtration: Uses porous materials to allow water to pass while retaining oil; effective for emulsions.
Coalescin...
Hand files are essential tools in workshops for shaping and finishing materials, with various types for specific applications.
Flat files: Used for smoothing flat surfaces and edges, ideal for metal and wood.
Round files: Perfect for enlarging holes and creating rounded shapes, commonly used in metalworking.
Half-round files: Versatile for both flat and curved surfaces, useful in detailed work on various materials.
Jindal Steel and Power Interview Experiences
347 interviews found
Selected
I applied via Campus Placement and was interviewed in Dec 2023. There were 2 interview rounds.
About Enviroment they select random Sub. For example politics etc.
(2 Questions)
- Q1. What is the Pascal law ?
- Ans.
Pascal's law states that a change in pressure applied to an enclosed fluid is transmitted undiminished to all portions of the fluid and to the walls of its container.
Pressure applied to a confined fluid is transmitted equally in all directions.
The law is used in hydraulic systems to generate mechanical force.
Example: A hydraulic car lift operates based on Pascal's law.
- Q2. Can you handle manpower up to 100 Or more
- Ans.
Yes, I have experience managing large teams and can handle manpower up to 100 or more.
I have successfully managed a team of 150 employees in my previous role
I am skilled in delegating tasks, setting goals, and ensuring productivity
I have experience in conducting performance reviews and providing feedback to team members
Interview Preparation Tips
Selected
(5 Questions)
- Q1. I am krishna murthy p
- Q2. I am Instrested bmm ispat company one of the best company
- Q3. One opportunity given sir
- Q4. Electrical engineering
- Q5. I am name krishna murthy p i am stady diploma electrical engineering I am experience totally 8 years
Interview Preparation Tips
Electrician Maintenance Technician Interview Questions & Answers
PRAKASH KUMAR SAHOO
posted on 13 Feb 2025
Selected
I am a quick learner and great team player.
I Concentrate on one thing at a time.
In Order to enhance my skill set .i am looking to better oppertunities.
(2 Questions)
- Q1. Self Introduction My self Prakash Kumar Sahoo I am 34 year old i live in angul have a family i have done Diploma Electeical Engineering I have got Experience in Electrician 9 year My strenght are I am had ...
- Q2. Why do you need a job? From now onwords i want to take my Responsibilltes and to so my skills knowledge and talent.
- Ans.
I need a job to take on responsibilities, utilize my skills, knowledge, and talent.
Seeking opportunities to grow and develop professionally
Financial stability and security
Contributing to the workforce and society
Utilizing acquired skills and knowledge in a practical setting
Megha Indulker
I appeared for an interview in Mar 2025, where I was asked the following questions.
- Q1. What are the principles of gardening?
- Ans.
Gardening principles focus on plant health, soil quality, and sustainable practices for successful cultivation.
Soil Health: Ensure good drainage and nutrient-rich soil; for example, use compost to improve soil structure.
Plant Selection: Choose plants suited to your climate and soil type; for instance, native plants often require less maintenance.
Water Management: Implement efficient watering techniques like drip irriga...
- Q2. What are the different methods of irrigation?
- Ans.
Irrigation methods include surface, drip, sprinkler, and subsurface systems, each with unique advantages for water management.
Surface Irrigation: Water flows over the soil surface; examples include furrow and basin irrigation.
Drip Irrigation: Delivers water directly to plant roots through a network of tubing; highly efficient for row crops.
Sprinkler Irrigation: Mimics rainfall by spraying water over crops; suitable for...
- Q3. What is the importance of landscaping?
- Ans.
Landscaping enhances aesthetics, promotes biodiversity, and improves environmental quality, contributing to well-being and property value.
Aesthetic Appeal: Well-designed landscapes enhance the visual appeal of residential and commercial properties, attracting visitors and potential buyers.
Environmental Benefits: Landscaping can improve air quality, reduce noise pollution, and provide habitats for wildlife, promoting bi...
- Q4. What are the principles of lawn care?
- Ans.
Effective lawn care involves proper mowing, watering, fertilizing, aerating, and pest management to maintain a healthy lawn.
Mowing: Keep grass at the recommended height (e.g., 2.5-3.5 inches for cool-season grasses) to promote healthy growth.
Watering: Water deeply and infrequently (1-1.5 inches per week) to encourage deep root development.
Fertilizing: Use a balanced fertilizer (e.g., 10-10-10) during the growing season...
- Q5. What are the effective methods for controlling insects and pests in a lawn?
- Ans.
Effective pest control in lawns includes cultural, biological, and chemical methods to maintain healthy grass and reduce infestations.
Cultural Control: Maintain healthy grass through proper mowing, watering, and fertilization to make it less susceptible to pests.
Biological Control: Introduce beneficial insects like ladybugs and lacewings that prey on harmful pests such as aphids.
Mechanical Control: Use physical barrier...
Interview Preparation Tips
Selected
I appeared for an interview before Jun 2024, where I was asked the following questions.
- Q1. What is the responsibility of QA/QC
- Ans.
QA/QC Engineers ensure product quality through systematic testing, inspections, and adherence to standards.
Develop and implement quality assurance processes to ensure compliance with industry standards.
Conduct regular inspections and audits to identify defects and areas for improvement.
Create and maintain documentation related to quality control procedures and test results.
Collaborate with cross-functional teams to add...
- Q2. Roll of QC Engineer
- Q3. Drawing reading
- Q4. What type of QC inspection?
- Ans.
QC inspections ensure products meet quality standards through various methods and processes.
Visual Inspection: Checking for surface defects or irregularities.
Dimensional Inspection: Measuring components to ensure they meet specifications, e.g., using calipers.
Functional Testing: Verifying that a product operates as intended, such as testing a software application.
Destructive Testing: Testing materials to failure to und...
- Q5. Roll of Inspection for the site?
- Ans.
Inspection ensures quality control, safety, and compliance on-site, preventing defects and ensuring project standards are met.
Ensures compliance with project specifications and standards, e.g., checking materials against approved samples.
Identifies defects early, reducing rework and costs, such as spotting concrete cracks before they worsen.
Verifies safety protocols are followed, e.g., inspecting scaffolding for stabil...
Interview Preparation Tips
Mechanical Operations and Maintenance Engineer Interview Questions & Answers
Anonymous
posted on 20 Dec 2024
Selected
I applied via Naukri.com and was interviewed in Nov 2024. There were 2 interview rounds.
(3 Questions)
- Q1. DM PANTS mechanical
- Q2. ITI fitter technician
- Q3. All pumps dmPLANT operator
(2 Questions)
- Q1. All pumps dm panlant
- Q2. DM PANTS mechanical engineer working
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Nov 2024. There was 1 interview round.
(4 Questions)
- Q1. Junior engineering mechanical JE
- Ans. The standard of the questions in Engineering subjects will be approximately of the level of Diploma in Engineering (Civil/ Electrical/ Mechanical/Electronics) from a recognized Institute, Board or University recognized by All India Board of Technical Education. All the questions will be set in SI units. The details of the syllabus are given below: Paper-I (i) General Intelligence & Reasoning: The Syllabus for Gener...
- Q2. Assistant manager
- Q3. Incharge assistant
- Q4. Mechanical Engineering suparvisor
Interview Preparation Tips
Selected
I applied via Company Website and was interviewed in Sep 2024. There was 1 interview round.
(5 Questions)
- Q1. What is your baranch name
- Ans.
Branch name is XYZ Electrical Services.
Branch name is XYZ Electrical Services.
Located in City, State.
Specializes in commercial and residential electrical work.
Has been in business for 10 years.
- Q2. What is your name
- Ans.
My name is John Smith.
My name is John Smith.
I go by the name John Smith.
You can call me John Smith.
- Q3. What is yor family bachground
- Ans.
My family background is diverse and includes a mix of professions and cultural backgrounds.
My family consists of individuals from various professions such as engineers, teachers, and healthcare professionals.
We come from different cultural backgrounds including Indian, American, and European.
There is a strong emphasis on education and hard work in my family.
Family gatherings are important to us and we often celebrate c...
- Q4. No experience are any company
- Q5. What is your last %
- Ans.
The last % refers to the percentage of completion of your most recent project or task.
The last % is a measure of how much of the project or task has been completed.
It can be calculated by dividing the amount of work completed by the total amount of work required.
For example, if you have completed 80% of a project, your last % would be 80%.
SHIV SAGAR
(4 Questions)
- Q1. MELTING FURNACE
- Q2. MACHINE OPERATOR
- Q3. ABOUT SAFETY and precautions
- Q4. TOOLS and equipment
Selected
I applied via Company Website and was interviewed in Sep 2024. There was 1 interview round.
(4 Questions)
- Q1. What are the different types of electric vehicle batteries, and how do they impact overall performance
- Ans.
Different types of electric vehicle batteries include lithium-ion, lead-acid, and nickel-metal hydride, each impacting performance in terms of energy density, weight, cost, and charging time.
Lithium-ion batteries are commonly used in electric vehicles due to their high energy density, lightweight, and long lifespan.
Lead-acid batteries are less expensive but heavier and have lower energy density compared to lithium-ion ...
- Q2. What are the different types of diodes
- Ans.
Different types of diodes include PN junction diode, Zener diode, Schottky diode, Light Emitting Diode (LED), and Photodiode.
PN junction diode: Basic type of diode used in most electronic circuits.
Zener diode: Used for voltage regulation and protection against overvoltage.
Schottky diode: Faster switching speed and lower forward voltage drop compared to PN junction diode.
Light Emitting Diode (LED): Emits light when curr...
- Q3. What are the different types of losses
- Ans.
Different types of losses in electrical engineering include copper losses, iron losses, stray losses, and mechanical losses.
Copper losses: Occur in the windings of electrical machines due to resistance in the copper wire.
Iron losses: Also known as core losses, occur in the magnetic core of transformers and machines due to hysteresis and eddy currents.
Stray losses: Occur due to leakage flux and eddy currents in the surr...
- Q4. Difference between AC and DC
- Ans.
AC stands for alternating current, which changes direction periodically, while DC stands for direct current, which flows in one direction constantly.
AC changes direction periodically, while DC flows in one direction constantly
AC is used in homes and businesses for powering electrical devices, while DC is used in batteries and electronic devices
AC can be easily converted to different voltages using transformers, while D...
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Oct 2024. There was 1 interview round.
(5 Questions)
- Q1. WTP MECHANICAL dipartment
- Q2. Mechanical engineer
- Q3. Mechanical department
- Q4. Mechanical mentens
- Q5. DMPLANT operation
Interview Preparation Tips
Jindal Steel and Power Interview FAQs
The duration of Jindal Steel and Power interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Jindal Steel and Power Interviews By Designations
- Jindal Steel and Power Junior Engineer Interview Questions
- Jindal Steel and Power Assistant Manager Interview Questions
- Jindal Steel and Power Graduate Engineer Trainee (Get) Interview Questions
- Jindal Steel and Power Deputy Manager Interview Questions
- Jindal Steel and Power Electrical Engineer Interview Questions
- Jindal Steel and Power Electrician Interview Questions
- Jindal Steel and Power Assistant Engineer Interview Questions
- Jindal Steel and Power Manager Interview Questions
- Show more
Interview Questions for Popular Designations
- Junior Engineer Interview Questions
- Assistant Manager Interview Questions
- Graduate Engineer Trainee (Get) Interview Questions
- Deputy Manager Interview Questions
- Electrician Interview Questions
- Electrical Engineer Interview Questions
- Mechanical Engineer Interview Questions
- Assistant Engineer Interview Questions
- Show more
Overall Interview Experience Rating
based on 394 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Jindal Steel and Power Reviews and Ratings
based on 3.4k reviews
Rating in categories
|
Assistant Manager
2.4k
salaries
|  ₹4 L/yr - ₹14 L/yr |
|
Deputy Manager
1.1k
salaries
| ₹5.7 L/yr - ₹19 L/yr |
|
Junior Engineer
943
salaries
| ₹1.8 L/yr - ₹5.6 L/yr |
|
Assistant Engineer
876
salaries
| ₹2.6 L/yr - ₹8.4 L/yr |
|
Manager
647
salaries
| ₹9 L/yr - ₹28 L/yr |
Tata Steel
JSW Steel
ArcelorMittal Nippon Steel
Jindal Stainless
- Home >
- Interviews >
- Jindal Steel and Power Interview Questions
