AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Molex Interview Questions and Answers
27 Interview questions
SPC is Statistical Process Control used to monitor and control quality. Cp and Cpk measure process capability. Sigma is population standard deviation.
SPC is a statistical method used to monitor and control processes to ensure quality standards are met.
Cp and Cpk are indices used to measure process capability. Cp measures how well the process fits within the specification limits, while Cpk measures how centered the...
OEE is a metric used to measure manufacturing productivity. 5 types of wastes are defects, overproduction, waiting, non-utilized talent, and transportation.
OEE stands for Overall Equipment Effectiveness and is a measure of how effectively a manufacturing operation is utilized
It is calculated by multiplying availability, performance, and quality
The 5 types of wastes are defects, overproduction, waiting, non-utilize...
8D analysis, Six Sigma, and SPC are quality control methodologies used in production engineering.
8D analysis is an eight-step problem-solving methodology used to identify, correct, and prevent recurring problems.
Six Sigma is a data-driven approach to quality control that aims to reduce defects and improve processes.
SPC (Statistical Process Control) is a method of monitoring and controlling a process to ensure it o...
Kaizen is a Japanese term for continuous improvement and 7QC tools are quality control techniques used to identify and solve problems.
Kaizen involves making small, incremental improvements to processes and systems to increase efficiency and reduce waste.
7QC tools include Pareto charts, cause-and-effect diagrams, flowcharts, histograms, scatter diagrams, control charts, and check sheets.
These tools are used to anal...
Surface treatment methods for sheet metal and plastics include painting, powder coating, anodizing, and plating.
Painting: Provides a decorative finish and corrosion protection. Can be done manually or through automated processes.
Powder coating: Applied as a dry powder and then cured under heat to form a hard finish. Offers durability and resistance to chipping and scratching.
Anodizing: Creates a protective oxide l...
Types of supply chain management include strategic, operational, and tactical.
Strategic supply chain management focuses on long-term planning and decision-making.
Operational supply chain management involves day-to-day processes and activities.
Tactical supply chain management deals with short-term adjustments and improvements.
Examples: Just-in-time inventory management, vendor-managed inventory, cross-docking.
Decoupling analysis involves calculating the required capacitance to maintain stable voltage levels in a circuit.
Decoupling analysis is essential for ensuring stable power supply in electronic circuits.
It involves calculating the amount of capacitance needed to filter out noise and maintain voltage levels.
Decoupling capacitors are placed strategically in a circuit to provide this filtering effect.
The formula for c...
Molex Interview Experiences
58 interviews found
Anonymous
I applied via Naukri.com and was interviewed in Oct 2024. There were 3 interview rounds.
Aptitude questions and 2 coding questions
(3 Questions)
- Q1. What is difference between list and tuple
- Ans.
List is mutable, tuple is immutable in Python.
List is defined using square brackets [], tuple using parentheses ().
Elements in list can be changed, added, or removed. Tuple elements are fixed.
List is used for homogeneous data, tuple for heterogeneous data.
Example: list_example = [1, 2, 3], tuple_example = (1, 'a', True)
- Q2. What is decorator
- Ans.
A decorator is a design pattern in object-oriented programming that allows behavior to be added to individual objects, either statically or dynamically, without affecting the behavior of other objects.
Decorators are used to modify the behavior of functions or methods.
They are commonly used in Python to add functionality to existing functions or classes.
Decorators are implemented using the @ symbol followed by the decor...
- Q3. What is get method
- Ans.
The get method is a function used to retrieve the value of a specified property from an object.
Used in JavaScript to access the value of a property in an object
Syntax: objectName.propertyName
Example: var person = {name: 'John', age: 30}; console.log(person.name); // Output: John
(2 Questions)
- Q1. Telme about your family
- Ans.
I come from a close-knit family of four, including my parents and younger sister.
My parents have always been supportive of my education and career choices.
I have a younger sister who is currently studying in college.
We enjoy spending quality time together on weekends, whether it's going for a hike or watching movies at home.
- Q2. What's the most sequent sentence you used in the your life and success
- Ans.
The sentence 'Never stop learning' has guided my journey, fostering growth and adaptability in my career.
Embraced continuous education: Enrolled in online courses to enhance my technical skills.
Adapted to challenges: When faced with a complex project, I sought mentorship to learn new strategies.
Cultivated a growth mindset: Regularly read industry-related books and articles to stay updated.
Networked with professionals: ...
Interview Preparation Tips
Skills evaluated in this interview
Selected
I applied via Referral and was interviewed in Sep 2024. There were 2 interview rounds.
(3 Questions)
- Q1. Sheet metal and plastic defects
- Q2. Sheet metal thumb rules
- Q3. Surface treatment for sheet metal and plastics
- Ans.
Surface treatment methods for sheet metal and plastics include painting, powder coating, anodizing, and plating.
Painting: Provides a decorative finish and corrosion protection. Can be done manually or through automated processes.
Powder coating: Applied as a dry powder and then cured under heat to form a hard finish. Offers durability and resistance to chipping and scratching.
Anodizing: Creates a protective oxide layer ...
(1 Question)
- Q1. About yourself and management questions
Interview Preparation Tips
I appeared for an interview in May 2025, where I was asked the following questions.
- Q1. PPAP related all the question
- Q2. APQP related all the question
I applied via Recruitment Consulltant and was interviewed in Aug 2024. There was 1 interview round.
(3 Questions)
- Q1. Self introduction
- Q2. About the project and it's technologies
- Q3. Mechanical Engineering basics
I applied via Referral and was interviewed in Aug 2024. There were 2 interview rounds.
(2 Questions)
- Q1. What material management
- Ans.
Material management involves planning, organizing, and controlling the flow of materials from procurement to consumption.
Involves procurement, storage, and distribution of materials
Ensures availability of materials for production or service delivery
Optimizes inventory levels to minimize costs and meet demand
Utilizes software like SAP MM for efficient management
- Q2. What is supply chain management
- Ans.
Supply chain management involves the coordination and optimization of processes involved in sourcing, production, and distribution of goods and services.
Involves planning, sourcing, making, delivering, and returning products
Focuses on efficiency, cost reduction, and customer satisfaction
Utilizes technology like ERP systems for real-time tracking and optimization
Examples include inventory management, demand forecasting,...
(2 Questions)
- Q1. Types of supply chain management
- Ans.
Types of supply chain management include strategic, operational, and tactical.
Strategic supply chain management focuses on long-term planning and decision-making.
Operational supply chain management involves day-to-day processes and activities.
Tactical supply chain management deals with short-term adjustments and improvements.
Examples: Just-in-time inventory management, vendor-managed inventory, cross-docking.
- Q2. Roles and responsibilities
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Jun 2024. There were 3 interview rounds.
(2 Questions)
- Q1. About Experience and Previous projects
- Q2. Basic of Components and Circuits
(2 Questions)
- Q1. General questions
- Q2. Power supply circuits and microcontroller based
About behaviour and handling problems
Interview Preparation Tips
Basavaraj R
Selected
I appeared for an interview in Apr 2025, where I was asked the following questions.
- Q1. Based on your skills
- Q2. Based on JD
I applied via LinkedIn and was interviewed in Jul 2024. There was 1 interview round.
(2 Questions)
- Q1. What kind FPGAs used, tell me difference
- Ans.
FPGAs are Field-Programmable Gate Arrays used in hardware design. They can be categorized as SRAM-based, Flash-based, or Antifuse-based.
SRAM-based FPGAs are volatile and require reprogramming every time they power up. Examples include Xilinx Virtex series.
Flash-based FPGAs are non-volatile and retain their configuration even when powered off. Examples include Actel ProASIC3 series.
Antifuse-based FPGAs are OTP (One-Time...
- Q2. Calculation of Decoupling analysis
- Ans.
Decoupling analysis involves calculating the required capacitance to maintain stable voltage levels in a circuit.
Decoupling analysis is essential for ensuring stable power supply in electronic circuits.
It involves calculating the amount of capacitance needed to filter out noise and maintain voltage levels.
Decoupling capacitors are placed strategically in a circuit to provide this filtering effect.
The formula for calcul...
Interview Preparation Tips
Skills evaluated in this interview
I appeared for an interview in Feb 2025, where I was asked the following questions.
- Q1. What is the design flow for printed circuit board (PCB) design?
- Ans.
PCB design flow involves several stages from concept to manufacturing, ensuring functionality and manufacturability.
1. Requirements Gathering: Define specifications, such as size, functionality, and environmental conditions.
2. Schematic Design: Create a circuit diagram using software like Altium Designer or Eagle.
3. Component Selection: Choose appropriate components based on specifications and availability.
4. PCB Layou...
- Q2. Questions regarding my Academic Project
(2 Questions)
- Q1. Basic angular questions
- Q2. Basic js questions
Top trending discussions
Molex Interview FAQs
Some of the top questions asked at the Molex interview -
The duration of Molex interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Molex Interviews By Designations
- Molex Engineer Trainee Interview Questions
- Molex Design Engineer Interview Questions
- Molex Trainee Operator Interview Questions
- Molex Lab Technician Interview Questions
- Molex Planning Engineer Interview Questions
- Molex Analyst Interview Questions
- Molex Software Engineer Interview Questions
- Molex Team Lead Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 52 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
|
Product Design Engineer
96
salaries
|  ₹5.8 L/yr - ₹10.9 L/yr |
|
Analyst
75
salaries
| ₹3.7 L/yr - ₹6.6 L/yr |
|
Design Engineer
65
salaries
| ₹5.8 L/yr - ₹13.2 L/yr |
|
Quality Inspector
65
salaries
| ₹1 L/yr - ₹4 L/yr |
|
Trainee Operator
57
salaries
| ₹1.6 L/yr - ₹2.9 L/yr |
Qualcomm
Intel
Apar Industries
TDK India Private Limited
- Home >
- Interviews >
- Molex Interview Questions
