AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
SIMPLEX ENGINEERING & FOUNDRY WORKS Interview Questions and Answers
8 Interview questions
The least count of vernier and micrometer depends on their design and specifications.
The least count of a vernier caliper can range from 0.02 mm to 0.05 mm.
The least count of a micrometer can range from 0.001 mm to 0.01 mm.
The least count is the smallest measurement that can be read on the instrument.
The least count is determined by the number of divisions on the scale and the pitch of the screw.
Higher precision i...
IS 2062 is a standard for hot rolled steel used in general structural purposes.
IS 2062 is a standard set by the Bureau of Indian Standards (BIS)
It specifies the requirements for hot rolled steel used in general structural purposes
The steel must have a minimum yield strength of 250 MPa
It covers steel grades from E 250 to E 650
IS 2062 is commonly used in the construction industry in India
Yes, UT stands for Ultrasonic Testing which is a non-destructive testing method used to detect flaws or defects in materials.
UT uses high-frequency sound waves to penetrate materials and detect internal flaws or defects.
It is commonly used in industries such as aerospace, automotive, and manufacturing.
UT can detect cracks, voids, and other defects that may not be visible to the naked eye.
It is a valuable tool for ...
GD&T symbols are geometric dimensioning and tolerancing symbols used to specify and control the form, orientation, and location of features on a part.
GD&T symbols are used to ensure that parts are manufactured to the correct specifications and fit together properly.
Some common GD&T symbols include concentricity, perpendicularity, and position.
GD&T symbols are often used in engineering drawings and blueprints.
GD&T ...
A lathe machine is a tool that rotates a workpiece on its axis to perform various operations such as cutting, drilling, and sanding.
Lathe machines are used to shape and form metal, wood, and other materials.
They can be used to create cylindrical shapes, tapered shapes, and threaded surfaces.
Lathe machines can also be used for facing, boring, and turning operations.
Examples of products made using lathe machines inc...
A calliper is a measuring tool used to measure the distance between two opposite sides of an object.
Callipers can be either digital or analogue.
They are commonly used in manufacturing and engineering industries.
Examples of callipers include vernier callipers, dial callipers, and digital callipers.
Callipers can measure both internal and external dimensions of an object.
They are precise and accurate, making them ide...
A calliper is a measuring tool used to measure the distance between two opposite sides of an object.
Callipers can be either digital or analogue.
They are commonly used in manufacturing and engineering to ensure precise measurements.
Examples of objects that can be measured with callipers include pipes, bolts, and bearings.
Tolerance refers to the acceptable range of variation in a measurement or specification.
Tolerance is used to determine if a product or process meets the required standards.
It allows for small deviations or errors within a specified limit.
Tolerance is often expressed as a plus or minus value around a target measurement.
For example, if the tolerance for a length measurement is ±0.1mm, it means the actual length can ...
SIMPLEX ENGINEERING & FOUNDRY WORKS Interview Experiences
7 interviews found
Anonymous
Selected
I applied via Walk-in and was interviewed before Apr 2022. There were 2 interview rounds.
(4 Questions)
- Q1. What least count of vernier and micrometer
- Ans.
The least count of vernier and micrometer depends on their design and specifications.
The least count of a vernier caliper can range from 0.02 mm to 0.05 mm.
The least count of a micrometer can range from 0.001 mm to 0.01 mm.
The least count is the smallest measurement that can be read on the instrument.
The least count is determined by the number of divisions on the scale and the pitch of the screw.
Higher precision instru...
- Q2. What are Gd&t symbols
- Ans.
GD&T symbols are geometric dimensioning and tolerancing symbols used to specify and control the form, orientation, and location of features on a part.
GD&T symbols are used to ensure that parts are manufactured to the correct specifications and fit together properly.
Some common GD&T symbols include concentricity, perpendicularity, and position.
GD&T symbols are often used in engineering drawings and blueprints.
GD&T symbo...
- Q3. Do you know about IS 2062
- Ans.
IS 2062 is a standard for hot rolled steel used in general structural purposes.
IS 2062 is a standard set by the Bureau of Indian Standards (BIS)
It specifies the requirements for hot rolled steel used in general structural purposes
The steel must have a minimum yield strength of 250 MPa
It covers steel grades from E 250 to E 650
IS 2062 is commonly used in the construction industry in India
- Q4. Do you have knowledge about UT
- Ans.
Yes, UT stands for Ultrasonic Testing which is a non-destructive testing method used to detect flaws or defects in materials.
UT uses high-frequency sound waves to penetrate materials and detect internal flaws or defects.
It is commonly used in industries such as aerospace, automotive, and manufacturing.
UT can detect cracks, voids, and other defects that may not be visible to the naked eye.
It is a valuable tool for ensur...
Selected
I applied via Naukri.com and was interviewed in Dec 2024. There was 1 interview round.
(1 Question)
- Q1. About experience you have
Interview Preparation Tips
Selected
I applied via Approached by Company and was interviewed before Nov 2022. There were 3 interview rounds.
They ask about g codes and m codes.
(1 Question)
- Q1. Some basic operations turn in machine. Little bit about engineering drawing. And fumour questions about engineering productions.
Interview Preparation Tips
I applied via Naukri.com and was interviewed in May 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Material knowledge detail of work experience
- Q2. Welding knowledge WPS and detail of welding process
Interview Preparation Tips
I applied via Walk-in and was interviewed in May 2021. There was 1 interview round.
Interview Questionnaire
4 Questions
- Q1. Waht did you mean by tollerence
- Ans.
Tolerance refers to the acceptable range of variation in a measurement or specification.
Tolerance is used to determine if a product or process meets the required standards.
It allows for small deviations or errors within a specified limit.
Tolerance is often expressed as a plus or minus value around a target measurement.
For example, if the tolerance for a length measurement is ±0.1mm, it means the actual length can vary ...
- Q2. What did you mean calliper
- Ans.
A calliper is a measuring tool used to measure the distance between two opposite sides of an object.
Callipers can be either digital or analogue.
They are commonly used in manufacturing and engineering to ensure precise measurements.
Examples of objects that can be measured with callipers include pipes, bolts, and bearings.
- Q3. Give the example of calliper
- Ans.
A calliper is a measuring tool used to measure the distance between two opposite sides of an object.
Callipers can be either digital or analogue.
They are commonly used in manufacturing and engineering industries.
Examples of callipers include vernier callipers, dial callipers, and digital callipers.
Callipers can measure both internal and external dimensions of an object.
They are precise and accurate, making them ideal fo...
- Q4. What is work oflathe machine
- Ans.
A lathe machine is a tool that rotates a workpiece on its axis to perform various operations such as cutting, drilling, and sanding.
Lathe machines are used to shape and form metal, wood, and other materials.
They can be used to create cylindrical shapes, tapered shapes, and threaded surfaces.
Lathe machines can also be used for facing, boring, and turning operations.
Examples of products made using lathe machines include ...
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed before Dec 2021. There were 4 interview rounds.
(1 Question)
- Q1. It's depends of your field
(1 Question)
- Q1. About your work experience etc
(1 Question)
- Q1. Discussion about salary and other facilities
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. I want to know about the job
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Recruitment Consultant and was interviewed in Sep 2019. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. About my previous experience, and my scope of work?
- Q2. Areas of strengths and areas need to develop
Interview Preparation Tips
Thanks and Regards
Rahman
Interview Questionnaire
1 Question
- Q1. Technical question
I applied via Campus Placement and was interviewed before Mar 2020. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. What is the most challenging situation you have been through in your career?
- Ans.
I faced a critical project deadline with unexpected technical challenges, requiring quick problem-solving and team collaboration.
Led a team during a major software deployment that faced unexpected bugs just days before launch.
Implemented a rapid response strategy, organizing daily stand-ups to address issues in real-time.
Collaborated with cross-functional teams to identify root causes and develop effective solutions.
Su...
Interview Preparation Tips
SIMPLEX ENGINEERING & FOUNDRY WORKS Interview FAQs
Tell us how to improve this page.
SIMPLEX ENGINEERING & FOUNDRY WORKS Interviews By Designations
- SIMPLEX ENGINEERING & FOUNDRY WORKS Electrical Maintenance Engineer Interview Questions
- SIMPLEX ENGINEERING & FOUNDRY WORKS Senior Engineer Mechanical Interview Questions
- SIMPLEX ENGINEERING & FOUNDRY WORKS Engineer Interview Questions
- SIMPLEX ENGINEERING & FOUNDRY WORKS Quality Inspector Interview Questions
- SIMPLEX ENGINEERING & FOUNDRY WORKS Quality Engineer Interview Questions
- SIMPLEX ENGINEERING & FOUNDRY WORKS Apprentice Trainee Interview Questions
- SIMPLEX ENGINEERING & FOUNDRY WORKS CNC Operator Interview Questions
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 5 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
SIMPLEX ENGINEERING & FOUNDRY WORKS Reviews and Ratings
based on 74 reviews
Rating in categories
|
Engineer
24
salaries
|  ₹1.8 L/yr - ₹4.6 L/yr |
|
Production Engineer
11
salaries
| ₹1.8 L/yr - ₹5 L/yr |
|
Quality Engineer
10
salaries
| ₹1.4 L/yr - ₹3.3 L/yr |
|
Junior Marketing Engineer
7
salaries
| ₹3.6 L/yr - ₹3.6 L/yr |
|
Deputy Manager
6
salaries
| ₹5.2 L/yr - ₹9.1 L/yr |
L&T Construction
Simplex Infrastructures
L&T Energy Hydrocarbon
AECOM
- Home >
- Interviews >
- SIMPLEX ENGINEERING & FOUNDRY WORKS Interview Questions
