Upload Button Icon Add office photos

Spinny

Compare button icon Compare button icon Compare

Filter interviews by

Spinny Evaluator Interview Questions and Answers

Updated 5 May 2025

13 Interview questions

An Evaluator was asked
Q. What is a four-stroke engine?
Ans. 

A 4-stroke engine is an internal combustion engine that completes four separate strokes in the intake, compression, power, and exhaust processes.

  • Intake stroke: Fuel and air are drawn into the combustion chamber.

  • Compression stroke: The fuel-air mixture is compressed by the piston.

  • Power stroke: The spark plug ignites the compressed mixture, causing an explosion that drives the piston down.

  • Exhaust stroke: The piston ...

An Evaluator was asked
Q. How do you identify a misfired car?
Ans. 

To identify a misfired car, look for symptoms such as rough idling, decreased engine power, and unusual exhaust emissions.

  • Listen for a rough or uneven engine idle.

  • Notice a decrease in engine power or acceleration.

  • Observe unusual exhaust emissions, such as black smoke or a strong smell of fuel.

  • Check for a flashing check engine light on the dashboard.

  • Perform a diagnostic scan using an OBD-II scanner to retrieve erro...

Evaluator Interview Questions Asked at Other Companies

asked in CARS24
Q1. Why come Black, blue and whie smoke ? ., what is firewall?, what ... read more
Q2. What are the basic rules you need to verify for the evaluation of ... read more
asked in Spinny
Q3. How do you check the engine back compression process?
asked in CARS24
Q4. When evaluating a car, what components should be checked first be ... read more
Q5. What is the difference between a hatchbacks and sedan and SUVs
An Evaluator was asked
Q. Where is the connecting rod located?
Ans. 

The connecting rod is a component in an engine that connects the piston to the crankshaft.

  • The connecting rod is located inside the engine block.

  • It connects the piston to the crankshaft, transferring the linear motion of the piston into rotational motion of the crankshaft.

  • In a typical four-stroke internal combustion engine, each cylinder has a connecting rod.

  • The connecting rod is usually made of steel or aluminum a...

An Evaluator was asked
Q. How do you identify when a gearbox overhaul is needed?
Ans. 

Gear box overhaul can be identified through various signs and symptoms.

  • Unusual noises or vibrations coming from the gear box

  • Difficulty in shifting gears or gears slipping

  • Leaking fluid or visible damage to the gear box

  • Decreased performance or power

  • Increased fuel consumption

  • Warning lights or error codes related to the gear box

  • Excessive heat or burning smell from the gear box

An Evaluator was asked
Q. Where is the plug attached?
Ans. 

The plug is typically attached to an electrical outlet.

  • The plug is usually connected to a wall socket or power strip.

  • In some cases, the plug may be attached to a power cord or extension cord.

  • The plug can be found in various locations depending on the specific device or appliance.

  • Examples include plugs on the back of a computer tower, the side of a television, or the bottom of a lamp.

What are the roles & responsibilities of a Evaluator at Spinny?

Vehicle Inspection

  • Conduct thorough vehicle inspections at customer locations
  • Maintain high standards of accuracy and efficiency

Read full roles & responsibilities

An Evaluator was asked
Q. How do you check the manufacturing year of a tire?
Ans. 

To check the tyre year and manufacturing, look for the DOT code on the sidewall of the tyre.

  • The DOT code is a combination of numbers and letters usually located on the sidewall of the tyre.

  • The last four digits of the DOT code indicate the week and year of manufacture.

  • For example, if the last four digits are '2318', it means the tyre was manufactured in the 23rd week of 2018.

Spinny HR Interview Questions

24 questions and answers

Q. What skills do you possess, and how do you demonstrate your enthusiasm for ... read more
Q. Can you describe your working experience and how you handle pressure?
Q. How do you plan to align your current role with the roles and responsibilit ... read more
An Evaluator was asked
Q. How does a turbocharger work?
Ans. 

A turbocharger boosts engine power by using exhaust gases to spin a turbine, compressing intake air for better combustion.

  • Turbochargers consist of two main components: a turbine and a compressor.

  • The turbine is driven by exhaust gases, which spin it at high speeds.

  • As the turbine spins, it drives the compressor, which draws in and compresses air.

  • Compressed air increases the amount of oxygen available for combustion,...

Are these interview questions helpful?
An Evaluator was asked
Q. How do you check the engine back compression process?
Ans. 

Engine back compression is checked using a compression gauge to assess cylinder pressure and engine health.

  • Use a compression gauge: Remove the spark plug and insert the gauge into the cylinder.

  • Crank the engine: Turn the engine over several times to get a reading.

  • Compare readings: Check the compression values against manufacturer specifications.

  • Look for discrepancies: Significant differences between cylinders may i...

An Evaluator was asked
Q. How do you identify when an engine needs an overhaul?
Ans. 

Engine overhaul can be identified by various signs such as reduced performance, increased oil consumption, and abnormal noises.

  • Reduced engine performance

  • Increased oil consumption

  • Abnormal noises such as knocking or ticking

  • Excessive smoke from the exhaust

  • Metal shavings in the oil

  • Loss of power or acceleration

  • Difficulty starting the engine

  • Poor fuel economy

An Evaluator was asked
Q. What is the expected salary for this position?
Ans. 

Salary depends on various factors like experience, role, and industry standards.

  • Experience Level: More experienced professionals typically earn higher salaries.

  • Industry Standards: Salaries can vary significantly between industries; tech jobs often pay more than education.

  • Location: Salaries may differ based on geographical location; urban areas usually offer higher pay.

  • Role Specifics: Specialized roles, like data s...

Spinny Evaluator Interview Experiences

10 interviews found

Evaluator Interview Questions & Answers

user image Anonymous

posted on 6 Apr 2025

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
  • Q1. Vehicle knowledge
  • Q2. You know body structure, paint quality, Electric harness & sensor diagnosis, Engine noises knowledgeable

Interview Preparation Tips

Interview preparation tips for other job seekers - Good expirence in the company Evaluater feald.

Evaluator Interview Questions & Answers

user image Anonymous

posted on 7 Mar 2024

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Sep 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. What is called 4 stoke engine

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice

Evaluator Interview Questions & Answers

user image Venu Charry

posted on 12 Dec 2024

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Briefly explanation about Body stature
  • Ans. 

    Body stature refers to the overall height and build of an individual.

    • Body stature includes factors such as height, weight, and body proportions.

    • It can vary greatly among individuals due to genetics, nutrition, and overall health.

    • Body stature can be classified into categories such as short, average, tall, underweight, overweight, etc.

  • Answered by AI
  • Q2. Engine parts difine

Interview Preparation Tips

Interview preparation tips for other job seekers - U must have knowledge about pin to pin knowledge about vehicle like tire to brakes s windshield glass all parts u must about information about mainly engine and transmissions and body stature ,number of noises in engine ,test drive experiences all knowledge about vehicle like this

Evaluator Interview Questions & Answers

user image Anonymous

posted on 5 May 2025

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before May 2024, where I was asked the following questions.

  • Q1. How many pillars are there in a car?
  • Q2. What is a firewall?

Evaluator Interview Questions & Answers

user image Anonymous

posted on 3 Oct 2023

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Approached by Company and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Body structure & engine related
  • Q2. Any thing about car

Interview Preparation Tips

Topics to prepare for Spinny Evaluator interview:
  • Good
  • Sales

Evaluator Interview Questions & Answers

user image Anonymous

posted on 14 Mar 2022

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. All questions experience and your technical, knowledge.
Round 3 - Technical 

(1 Question)

  • Q1. All questions experience and your technical skills and knowledge.

Interview Preparation Tips

Interview preparation tips for other job seekers - Great acxlant spinny is best company in last 20 year in my career in Automobile in India also. Thanks nokri.com.

Evaluator Interview Questions & Answers

user image Anonymous

posted on 27 Apr 2023

Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Indeed and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(6 Questions)

  • Q1. How to work turbo
  • Ans. 

    A turbocharger boosts engine power by using exhaust gases to spin a turbine, compressing intake air for better combustion.

    • Turbochargers consist of two main components: a turbine and a compressor.

    • The turbine is driven by exhaust gases, which spin it at high speeds.

    • As the turbine spins, it drives the compressor, which draws in and compresses air.

    • Compressed air increases the amount of oxygen available for combustion, enha...

  • Answered by AI
  • Q2. How to identify gear box overhaul
  • Ans. 

    Gear box overhaul can be identified through various signs and symptoms.

    • Unusual noises or vibrations coming from the gear box

    • Difficulty in shifting gears or gears slipping

    • Leaking fluid or visible damage to the gear box

    • Decreased performance or power

    • Increased fuel consumption

    • Warning lights or error codes related to the gear box

    • Excessive heat or burning smell from the gear box

  • Answered by AI
  • Q3. How many pillers Car
  • Q4. Where is the connecting rod
  • Q5. How to identify misfired Car
  • Ans. 

    To identify a misfired car, look for symptoms such as rough idling, decreased engine power, and unusual exhaust emissions.

    • Listen for a rough or uneven engine idle.

    • Notice a decrease in engine power or acceleration.

    • Observe unusual exhaust emissions, such as black smoke or a strong smell of fuel.

    • Check for a flashing check engine light on the dashboard.

    • Perform a diagnostic scan using an OBD-II scanner to retrieve error cod...

  • Answered by AI
  • Q6. Pillers damaged and how to identify
  • Ans. 

    Pillars can be damaged due to various reasons. Identifying damage involves visual inspection, checking for cracks, leaning, or other signs of instability.

    • Inspect the pillars for visible cracks or fractures.

    • Check if the pillars are leaning or tilting.

    • Look for signs of water damage or erosion.

    • Examine the pillars for any signs of structural weakness or deterioration.

    • Consider conducting a professional assessment or using s...

  • Answered by AI
Round 3 - Technical 

(6 Questions)

  • Q1. Engine parts telling
  • Q2. Where is the plug attached
  • Ans. 

    The plug is typically attached to an electrical outlet.

    • The plug is usually connected to a wall socket or power strip.

    • In some cases, the plug may be attached to a power cord or extension cord.

    • The plug can be found in various locations depending on the specific device or appliance.

    • Examples include plugs on the back of a computer tower, the side of a television, or the bottom of a lamp.

  • Answered by AI
  • Q3. How to identify engine overhaul
  • Q4. How to check Tyre year and manufacturing
  • Ans. 

    To check the tyre year and manufacturing, look for the DOT code on the sidewall of the tyre.

    • The DOT code is a combination of numbers and letters usually located on the sidewall of the tyre.

    • The last four digits of the DOT code indicate the week and year of manufacture.

    • For example, if the last four digits are '2318', it means the tyre was manufactured in the 23rd week of 2018.

  • Answered by AI
  • Q5. How to check engine is back compression process
  • Ans. 

    Engine back compression is checked using a compression gauge to assess cylinder pressure and engine health.

    • Use a compression gauge: Remove the spark plug and insert the gauge into the cylinder.

    • Crank the engine: Turn the engine over several times to get a reading.

    • Compare readings: Check the compression values against manufacturer specifications.

    • Look for discrepancies: Significant differences between cylinders may indica...

  • Answered by AI
  • Q6. When Black smoke is coming,white smoke is coming, blue smoke
  • Ans. 

    Black smoke indicates burning oil, white smoke indicates coolant leak, blue smoke indicates burning oil.

    • Black smoke is usually caused by burning oil, which can be a sign of engine problems.

    • White smoke is often caused by a coolant leak, which can indicate a blown head gasket or cracked engine block.

    • Blue smoke is typically caused by burning oil, which can be a sign of worn piston rings or valve seals.

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Spinny Evaluator interview:
  • Automobile

Evaluator Interview Questions & Answers

user image Anonymous

posted on 15 Aug 2021

I applied via Referral and was interviewed in Jul 2021. There were 5 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Body panels, road test diagnosis, paint defect, vehicle electrical and mechanical,

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare yourself

Evaluator Interview Questions & Answers

user image Anonymous

posted on 28 Nov 2021

I applied via Naukri.com and was interviewed in May 2021. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. Working principle turbocharger
  • Q2. Engine strok
  • Q3. Types of smoke
  • Ans. 

    Smoke can be categorized into different types based on its source and composition.

    • Common types of smoke include cigarette smoke, wildfire smoke, and industrial smoke.

    • Cigarette smoke contains harmful chemicals such as nicotine and tar.

    • Wildfire smoke is produced by burning vegetation and can contain particulate matter and toxic gases.

    • Industrial smoke can come from factories and power plants, often containing pollutants l...

  • Answered by AI
  • Q4. Salery kitni hogi

Interview Preparation Tips

Interview preparation tips for other job seekers - Nothing no

Evaluator Interview Questions & Answers

user image Anonymous

posted on 5 Jun 2021

I applied via Naukri.com and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. 1. Intro speech, 2. Technical besic questions about automobile ,

Interview Preparation Tips

Interview preparation tips for other job seekers - Nothing any complicate ans required by spinney, just u tell what u know about automobile, and what u gain knowledge about automobile when u work at ur workshop fild as technician, just confident required when give ans,

Top trending discussions

View All
Interview Hub
6d (edited)
anshitanegi
·
ex -
Planet Spark
When HR’s Chinese English made me drop the interview!
So, I talked to the HR yesterday about the interview. I asked Please send me the location But their English… bro I was shocked! It was like talking to someone jisne english nahi kuch ar hi seekh liya ho, if the HR’s English is this I can only imagine the rest of the company I decided to drop the interview with this chinese english😶‍🌫️
FeedCard Image
Got a question about Spinny?
Ask anonymously on communities.

Spinny Interview FAQs

How many rounds are there in Spinny Evaluator interview?
Spinny interview process usually has 2 rounds. The most common rounds in the Spinny interview process are Technical and Resume Shortlist.
How to prepare for Spinny Evaluator interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Spinny. The most common topics and skills that interviewers at Spinny expect are Evaluation, Repair, Automobile, Technician Activities and ITI.
What are the top questions asked in Spinny Evaluator interview?

Some of the top questions asked at the Spinny Evaluator interview -

  1. How to check engine is back compression proc...read more
  2. How to identify gear box overh...read more
  3. How to check Tyre year and manufactur...read more
How long is the Spinny Evaluator interview process?

The duration of Spinny Evaluator interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

Overall Interview Experience Rating

4.5/5

based on 8 interview experiences

Difficulty level

Moderate 60%
Hard 40%

Duration

Less than 2 weeks 100%
View more

Interview Questions from Similar Companies

Swiggy Evaluator Interview Questions
3.7
 • 486 Interviews
Meesho Evaluator Interview Questions
3.7
 • 379 Interviews
Udaan Evaluator Interview Questions
4.0
 • 360 Interviews
Blinkit Evaluator Interview Questions
3.8
 • 251 Interviews
Oyo Rooms Evaluator Interview Questions
3.2
 • 235 Interviews
Myntra Evaluator Interview Questions
3.9
 • 230 Interviews
BlackBuck Evaluator Interview Questions
3.7
 • 197 Interviews
FirstCry Evaluator Interview Questions
3.5
 • 194 Interviews
Tata 1mg Evaluator Interview Questions
3.6
 • 191 Interviews
View all
Spinny Evaluator Salary
based on 133 salaries
₹2.4 L/yr - ₹5 L/yr
22% more than the average Evaluator Salary in India
View more details

Spinny Evaluator Reviews and Ratings

based on 62 reviews

3.9/5

Rating in categories

3.7

Skill development

3.8

Work-life balance

3.8

Salary

3.3

Job security

3.5

Company culture

2.9

Promotions

3.7

Work satisfaction

Explore 62 Reviews and Ratings
Operations Analyst
498 salaries
unlock blur

₹2.2 L/yr - ₹6.5 L/yr

Relationship Manager
268 salaries
unlock blur

₹2.7 L/yr - ₹5.1 L/yr

Team Lead
206 salaries
unlock blur

₹3.4 L/yr - ₹7.8 L/yr

CAR Consultant
178 salaries
unlock blur

₹2.1 L/yr - ₹4.5 L/yr

Assistant Manager
159 salaries
unlock blur

₹4.5 L/yr - ₹10.8 L/yr

Explore more salaries
Compare Spinny with

Truebil

3.8
Compare

Udaan

4.0
Compare

Swiggy

3.7
Compare

Oyo Rooms

3.2
Compare
write
Share an Interview