AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
i
Suroj
Buildcon
Work with us 
Compare
Filter interviews by
Suroj Buildcon Interview Questions and Answers
13 Interview questions
Non-destructive testing is a method used to evaluate the properties of a material, component, or system without causing damage.
Non-destructive tests are used to detect flaws or defects in materials without altering their physical properties.
Examples of non-destructive tests include ultrasonic testing, radiography, magnetic particle testing, and visual inspection.
These tests are commonly used in industries such as ...
IS code 10262 is followed for mix design, IS code 516 for cube test, IS code 1199 for slump test.
Mix design follows IS code 10262
Cube test follows IS code 516
Slump test follows IS code 1199
Layouts involve planning and designing the physical arrangement of structures, while stake out involves physically marking the positions of these structures on the ground.
Layouts refer to the process of planning and designing the physical arrangement of structures, such as buildings, roads, or utilities.
Stake out involves physically marking the positions of these structures on the ground based on the layout plans.
...
I have 10 years of experience in construction site supervision.
I have supervised construction sites for 10 years
Managed teams of workers and subcontractors
Ensured compliance with safety regulations and project timelines
Implemented quality control measures to maintain high standards
Resolved any issues or conflicts that arose on site
The ratio of M20 concrete is 1:1.5:3.
The ratio of M20 concrete refers to the proportion of cement, sand, and aggregate used in the mix.
For M20 grade concrete, the ratio is 1 part cement, 1.5 parts sand, and 3 parts aggregate.
This ratio is commonly used for general construction purposes.
Example: For 1 cubic meter of M20 concrete, you would need 1 part cement (cubic meter), 1.5 parts sand (1.5 cubic meters), and 3 p...
Understanding aggregates, yield strength, tensile stress, steel types, shuttering quantity, and plaster thickness is essential for site engineers.
Types of Aggregate: Coarse aggregates (e.g., gravel, crushed stone) and fine aggregates (e.g., sand) are used in concrete.
Yield Strength: The stress at which a material begins to deform plastically; for example, structural steel typically has a yield strength of 250 MPa.
...
Bending moment measures the internal moment that causes bending in a structural element, crucial for design and analysis.
Definition: A bending moment is the internal moment that induces bending in a structural element, such as beams.
Calculation: It is calculated as the product of the force applied and the distance from the point of interest to the point of force application.
Significance: Understanding bending mome...
Leveling process in hilly areas involves using surveying techniques to determine elevation differences and create a level surface.
Survey the area using leveling instruments such as a level or total station
Establish benchmarks at different elevations to reference measurements
Use trigonometry to calculate elevation differences between points
Create a contour map to visualize the terrain
Construct retaining walls or te...
A project bar chart is a visual representation of project tasks and their timelines.
Project bar charts show tasks as bars with lengths representing their duration
They help in visualizing project timelines and dependencies
Commonly used in project management software like Microsoft Project or Asana
AutoCAD is a software used in civil engineering for creating and editing 2D and 3D designs of buildings, infrastructure, and construction projects.
AutoCAD is used for drafting and designing architectural plans, structural layouts, and electrical and plumbing systems.
It allows civil engineers to create accurate and detailed drawings, including floor plans, elevations, sections, and site plans.
AutoCAD enables engine...
Suroj Buildcon Interview Experiences
27 interviews found
Anonymous
Selected
I applied via Company Website and was interviewed in Aug 2023. There were 2 interview rounds.
(10 Questions)
- Q1. How many experience construction site supervision
- Ans.
I have 10 years of experience in construction site supervision.
I have supervised construction sites for 10 years
Managed teams of workers and subcontractors
Ensured compliance with safety regulations and project timelines
Implemented quality control measures to maintain high standards
Resolved any issues or conflicts that arose on site
- Q2. Site supervision material related
- Q3. Site equipment related
- Q4. Site manpower related
- Q5. Site safety rules
- Q6. Project bar chart used
- Ans.
A project bar chart is a visual representation of project tasks and their timelines.
Project bar charts show tasks as bars with lengths representing their duration
They help in visualizing project timelines and dependencies
Commonly used in project management software like Microsoft Project or Asana
- Q7. Material site mixing and r m c related
- Q8. Centering work related
- Q9. Site problems related
- Q10. Contractor and sab Contractor
Interview Preparation Tips
- Supervision
Selected
I appeared for an interview in Jan 2025.
(2 Questions)
- Q1. Tell me about yourself.
- Q2. What are your salary expectations?
- Ans.
My salary expectations are based on my experience, skills, and the market rate for Senior Engineers.
Consider my years of experience in the industry
Take into account my specialized skills and certifications
Research the current market rate for Senior Engineers in this location
Open to negotiation based on the overall compensation package
(2 Questions)
- Q1. What is the leveling process in hilly areas?
- Ans.
Leveling process in hilly areas involves using surveying techniques to determine elevation differences and create a level surface.
Survey the area using leveling instruments such as a level or total station
Establish benchmarks at different elevations to reference measurements
Use trigonometry to calculate elevation differences between points
Create a contour map to visualize the terrain
Construct retaining walls or terrace...
- Q2. What is a non-destructive test?
- Ans.
Non-destructive testing is a method used to evaluate the properties of a material, component, or system without causing damage.
Non-destructive tests are used to detect flaws or defects in materials without altering their physical properties.
Examples of non-destructive tests include ultrasonic testing, radiography, magnetic particle testing, and visual inspection.
These tests are commonly used in industries such as aeros...
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Sep 2024. There was 1 interview round.
(2 Questions)
- Q1. You Know contractor billing.
- Ans.
Yes, I am familiar with contractor billing processes.
Understanding of contract terms and conditions
Reviewing contractor invoices for accuracy
Processing payments in accordance with contract terms
Resolving any billing discrepancies
Maintaining detailed records of contractor billing
- Q2. Quantity surveyor
Interview Preparation Tips
I applied via Recruitment Consulltant and was interviewed in May 2024. There was 1 interview round.
(4 Questions)
- Q1. Case study about quality team size
- Q2. Details about relevant experience
- Q3. Personal Details
- Q4. Past Experience
Interview Preparation Tips
- Q1. What use the pile
- Ans.
Piles are deep foundations used to transfer loads to deeper, stable soil layers, enhancing structural stability.
Piles are used in construction to support heavy structures like bridges and skyscrapers.
They are driven into the ground to reach stable soil or bedrock, ensuring load-bearing capacity.
Examples include concrete piles, steel piles, and timber piles, each suited for different soil conditions.
Piles can also be us...
- Q2. What reason the pile
- Ans.
Piles are deep foundation elements used to transfer loads to deeper, more stable soil layers, ensuring structural stability.
Piles are used in weak soil conditions where shallow foundations are inadequate.
They can be made of concrete, steel, or timber, depending on the project requirements.
Examples include friction piles, which rely on skin friction, and end-bearing piles, which transfer load to a solid layer.
Piles are ...
- Q1. About Rcc structure
- Q2. About Building material
Vinod Kumar Singh
Selected
I appeared for an interview in Oct 2024, where I was asked the following questions.
- Q1. One round hr suroj buildcon
- Q2. One round hr suroj buildcon construction work
- Ans.
Yes im one round hr
- Q3. Construction work road and buildings
- Ans.
Yes experience in construction work road and industrial project experience
- Q4. Finishing work road and buildings
- Q5. Finishing work in the w
- Q6. Finishing work in constructions Pvt
- Q7. Im hard work in industrial project
- Ans.
Yes Aurangabad Maharashtra
Interview Preparation Tips
I appeared for an interview in Mar 2025, where I was asked the following questions.
- Q1. As per company policy
- Q2. Safety management
Selected
I applied via LinkedIn and was interviewed in Aug 2023. There were 3 interview rounds.
Regarding technical knowledge in that paper
(1 Question)
- Q1. Site knowledge regarding building.and infrastructure development
(1 Question)
- Q1. Communication skills
Interview Preparation Tips
shiv sagar
Selected
I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.
(2 Questions)
- Q1. Site supervisor question and interior work fully
- Q2. Home interior questions
Interview Preparation Tips
(1 Question)
- Q1. How to balance your work life.
Top trending discussions
Suroj Buildcon Interview FAQs
Some of the top questions asked at the Suroj Buildcon interview -
The duration of Suroj Buildcon interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Suroj Buildcon Interviews By Designations
- Suroj Buildcon Senior Engineer Interview Questions
- Suroj Buildcon Senior Supervisor Interview Questions
- Suroj Buildcon Safety Officer Interview Questions
- Suroj Buildcon Civil Engineer Interview Questions
- Suroj Buildcon Site Engineer Interview Questions
- Suroj Buildcon Assistant Resident Engineer Interview Questions
- Suroj Buildcon Project Coordinator Interview Questions
- Suroj Buildcon HR Assistant Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 47 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Suroj Buildcon Reviews and Ratings
based on 503 reviews
Rating in categories
|
Safety Officer
69
salaries
|  ₹2.2 L/yr - ₹5 L/yr |
|
Junior Engineer
59
salaries
| ₹1.8 L/yr - ₹3.8 L/yr |
|
Junior Engineer Civil
58
salaries
| ₹2 L/yr - ₹4.8 L/yr |
|
Senior Engineer
55
salaries
| ₹4.1 L/yr - ₹9.5 L/yr |
|
Quantity Surveyor
36
salaries
| ₹3 L/yr - ₹8.5 L/yr |
L&T Energy Hydrocarbon
AECOM
Sterling & Wilson
Apco Infratech
- Home >
- Interviews >
- Suroj Buildcon Interview Questions
