AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Bharat Gears Senior QA Lead Interview Questions and Answers
Bharat Gears Senior QA Lead Interview Experiences
1 interview found
I applied via Referral and was interviewed before Oct 2020. There were 3 interview rounds.
Interview Questionnaire
4 Questions
- Q1. What is QMS ?
- Ans.
QMS stands for Quality Management System.
QMS is a set of policies, processes, and procedures that ensure quality in products or services.
It helps in meeting customer requirements and regulatory standards.
QMS includes activities like quality planning, quality control, quality assurance, and quality improvement.
ISO 9001 is a popular QMS standard used by organizations worldwide.
- Q2. Diff.between ISO & IATF
- Ans.
ISO is a generic standard for quality management while IATF is a specific standard for automotive industry.
ISO focuses on customer satisfaction and continuous improvement while IATF focuses on specific requirements for automotive industry
IATF requires compliance with ISO 9001 and adds additional requirements specific to automotive industry
IATF certification is required for automotive suppliers to do business with major...
- Q3. Diff.between Verification & Vvalidation
- Ans.
Verification ensures that the product is built according to the requirements while validation ensures that the product meets the customer's needs.
Verification checks if the product is built correctly while validation checks if the right product is built.
Verification is a process of evaluating documents, plans, code, and specifications while validation is a process of evaluating the final product.
Verification is done be...
- Q4. Scoring of fmea
- Ans.
FMEA scoring is a method to prioritize risks based on their severity, occurrence, and detection.
FMEA scoring helps identify high-risk areas that require immediate attention.
The scoring is based on three factors: severity, occurrence, and detection.
Each factor is scored on a scale of 1-10, with 10 being the highest risk.
The scores are multiplied to give a risk priority number (RPN).
The higher the RPN, the higher the pri...
Interview Preparation Tips
Skills evaluated in this interview
Top trending discussions
Interview questions from similar companies
I applied via Recruitment Consultant and was interviewed in Nov 2019. There were 3 interview rounds.
Interview Questionnaire
4 Questions
- Q1. Qms related all questions (ISO/IATF). And how development of products in process, Processe controls
- Q2. How can improve communication and personality
- Ans.
Improving communication and personality requires self-awareness, active listening, and continuous learning.
Practice active listening to understand others' perspectives
Be aware of your own communication style and adjust as needed
Seek feedback and be open to constructive criticism
Read books or take courses on communication and interpersonal skills
Practice empathy and emotional intelligence
Be respectful and courteous in a...
- Q3. How can show your potential
- Ans.
I can demonstrate my potential through proactive problem-solving, leadership, and continuous learning in engineering projects.
Proactively identify and solve complex engineering problems, like optimizing a production process that increased efficiency by 20%.
Lead cross-functional teams in projects, such as spearheading a software development initiative that delivered a product ahead of schedule.
Engage in continuous learn...
- Q4. How can show first impressions
- Ans.
First impressions can be shown through body language, attire, and communication skills.
Body language can convey confidence or nervousness
Attire can show professionalism or lack thereof
Communication skills can demonstrate intelligence and articulation
Eye contact and a firm handshake can also make a positive impression
I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 4 interview rounds.
(1 Question)
- Q1. Technical questions related to Mechanical Engineering. Current job role and responsibilities
(2 Questions)
- Q1. Current job role and responsibilities.
- Q2. What is Tempering? Material science questions
(2 Questions)
- Q1. Interview with VP India.
- Q2. Questions on Combustion Engines. Difference between two-stroke and four-stroke. Current job role and responsibilities. How to design a snap.
Interview Preparation Tips
I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.
Interview Questionnaire
7 Questions
- Q1. Which types of lacquer used on lens and Housing ?
- Ans.
The types of lacquer used on lens and housing include acrylic lacquer, polyurethane lacquer, and epoxy lacquer.
Acrylic lacquer is commonly used on lens and housing due to its high transparency and UV resistance.
Polyurethane lacquer provides excellent durability and chemical resistance, making it suitable for lens and housing.
Epoxy lacquer offers superior adhesion and impact resistance, making it a preferred choice for ...
- Q2. What is size fine filter ?
- Ans.
A size fine filter is a type of filter used to remove small particles or impurities from a fluid or gas.
Size fine filters are commonly used in industries such as manufacturing, pharmaceuticals, and food processing.
They are designed to capture particles that are smaller than what can be filtered by regular filters.
These filters can be made of various materials such as paper, fabric, or synthetic fibers.
Examples of size ...
- Q3. On which material direct metalizing is applicable ?
- Ans.
Direct metalizing is applicable on materials that can conduct electricity.
Direct metalizing is a process of coating a non-metallic surface with a thin layer of metal.
The material should be able to conduct electricity for direct metalizing to be applicable.
Materials like plastic, glass, and ceramics can be direct metalized.
Direct metalizing is commonly used in the automotive, aerospace, and electronics industries.
- Q4. PC Material
- Q5. How much UV energy is required for curing?
- Ans.
The amount of UV energy required for curing depends on the type of material being cured and the intensity of the UV light.
UV energy required for curing varies depending on the material being cured
Intensity of the UV light also affects the amount of energy required
UV energy is typically measured in Joules per square centimeter (J/cm²)
Examples of materials that require UV curing include adhesives, coatings, and inks
- Q6. 2500 ~ 3500
- Q7. How much DFT is required as per standard ?
- Ans.
The amount of DFT required as per standard varies depending on the specific industry and project requirements.
The required amount of DFT (Design for Testability) is determined by industry standards and project specifications.
Different industries may have different standards for DFT.
The complexity and size of the project also influence the amount of DFT required.
DFT techniques include scan chains, built-in self-test (BI...
Interview Preparation Tips
Senior Engineer Interview Questions & Answers
Tata AutoComp Systems
Ayaz Sheikh
posted on 14 Nov 2024
(2 Questions)
- Q1. What is cycle time?
- Ans.
Cycle time is the total time taken to complete a process or task from start to finish.
Cycle time is a key metric in process improvement and efficiency analysis.
It helps in identifying bottlenecks and areas for improvement in a process.
For example, in manufacturing, cycle time can refer to the time taken to produce one unit of a product.
Reducing cycle time can lead to increased productivity and cost savings.
- Q2. What is line balancing
- Ans.
Line balancing is the process of assigning tasks to workstations in a way that evens out the workload and maximizes efficiency.
Involves distributing work evenly among workstations
Helps in reducing idle time and bottlenecks
Improves productivity and efficiency
Example: In a manufacturing plant, line balancing ensures each workstation has a similar amount of work to do
Selected
I applied via Approached by Company
(1 Question)
- Q1. About lithium ion battery
Interview Preparation Tips
(1 Question)
- Q1. Tell me about your self
- Ans.
Experienced Senior Engineer with a strong background in software development, project management, and team leadership.
Over 10 years of experience in software engineering, specializing in full-stack development.
Led a team of 5 engineers in a successful project that improved system performance by 30%.
Proficient in multiple programming languages including Java, Python, and JavaScript.
Implemented Agile methodologies, resul...
Senior Engineer Interview Questions & Answers
Tata AutoComp Systems
PRADEEP GHANSHYAM ZANZANE
posted on 9 Nov 2024
Selected
I applied via Approached by Company and was interviewed in Oct 2024. There was 1 interview round.
(2 Questions)
- Q1. Scm role and responsibilities
- Ans.
SCM involves managing supply chain processes to optimize efficiency and reduce costs.
Oversee procurement processes to ensure timely acquisition of materials.
Coordinate logistics to streamline transportation and distribution.
Implement inventory management systems to minimize waste and stockouts.
Analyze supply chain data to identify areas for improvement, such as reducing lead times.
Collaborate with suppliers and vendors...
- Q2. Earlier experience and roles
- Ans.
I have over 10 years of experience in software engineering, focusing on system architecture and team leadership.
Led a team of 5 engineers in developing a scalable microservices architecture for a financial application.
Implemented CI/CD pipelines that reduced deployment time by 40%.
Worked on a cross-functional team to integrate AI-driven analytics into existing products, enhancing user experience.
Mentored junior enginee...
(3 Questions)
- Q1. How are you ?
- Q2. Where do you live
- Q3. How mch experiance you have
- Ans.
I have 8 years of experience in the field of engineering.
I have worked in various engineering roles for 8 years
I have experience in project management, design, and implementation
I have successfully completed multiple engineering projects
I have received positive feedback and recognition for my work
Interview Preparation Tips
Senior Engineer Interview Questions & Answers
Endurance Technologies
Anonymous
posted on 10 Aug 2022
I applied via Walk-in
(1 Question)
- Q1. What is your current role and responsibility
(1 Question)
- Q1. Why you are leaving your current job
Interview Preparation Tips
Bharat Gears Interview FAQs
Tell us how to improve this page.
Bharat Gears Interviews By Designations
- Bharat Gears Project Engineer Interview Questions
- Bharat Gears Quality Engineer Interview Questions
- Bharat Gears Production Engineer Interview Questions
- Bharat Gears Assistant Engineer Interview Questions
- Bharat Gears Electrical Engineer Interview Questions
- Bharat Gears Graduate Engineer Interview Questions
- Bharat Gears QA QC Engineer Interview Questions
- Bharat Gears QA Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Senior Engineer Interview Questions
- Associate Interview Questions
- Senior Associate Interview Questions
- Technical Lead Interview Questions
- Senior Consultant Interview Questions
- Senior Test Engineer Interview Questions
- Software Tester Interview Questions
- Senior QA Engineer Interview Questions
- Show more
Interview Questions from Similar Companies
|
Production Engineer
195
salaries
|  ₹1.1 L/yr - ₹5.1 L/yr |
|
Quality Engineer
126
salaries
| ₹1.4 L/yr - ₹4.5 L/yr |
|
Production Supervisor
75
salaries
| ₹2.2 L/yr - ₹4.5 L/yr |
|
Diploma Mechanical Engineer
64
salaries
| ₹1.3 L/yr - ₹4.2 L/yr |
|
Quality Inspector
54
salaries
| ₹1.3 L/yr - ₹3.5 L/yr |
JBM Group
Subros
Endurance Technologies
Spark Minda
- Home >
- Interviews >
- Bharat Gears Interview Questions
