AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Energy Efficiency Services Site Engineer Interview Questions and Answers
Energy Efficiency Services Site Engineer Interview Experiences
1 interview found
Anonymous
Selected
I applied via Naukri.com and was interviewed before Sep 2023. There was 1 interview round.
(2 Questions)
- Q1. How many single phase light Watt
- Ans.
The wattage of single phase lights varies depending on the type and size of the light.
The wattage of single phase lights can range from 5 watts for LED lights to 100 watts for incandescent lights.
It is important to consider the power consumption and brightness needed when selecting single phase lights.
Consult the manufacturer's specifications for the exact wattage of a specific single phase light.
- Q2. How Street light connection
- Ans.
Street light connections involve wiring the lights to a power source for illumination.
Street lights are typically connected to an electrical grid for power supply.
The connection involves wiring the lights to a power source using appropriate cables and connectors.
Proper grounding and insulation are essential to ensure safety and prevent electrical hazards.
Regular maintenance and inspection of the connections are necessa...
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Company Website and was interviewed before May 2021. There was 1 interview round.
(1 Question)
- Q1. What is impidance,DGR FUNDAMENTAL AND BASICS
- Ans.
Impedance is the measure of opposition to the flow of electric current in a circuit. DGR fundamental refers to the Dielectric Withstand Voltage test.
Impedance is measured in ohms and is the combination of resistance, capacitance, and inductance in a circuit.
DGR fundamental is a test to determine the maximum voltage a material can withstand without breaking down.
Basics of impedance include understanding the relationship...
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed before Jan 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Transformers and generators at wtg questions
- Q2. HT and WTG G-97 & G-114 wtg model questions
Interview Preparation Tips
- Electricals
I applied via Naukri.com and was interviewed in Jan 2022. There was 1 interview round.
(3 Questions)
- Q1. Reinforcement and excavation and
- Q2. As for drawing work and level
- Q3. Level and coordinate
Interview Preparation Tips
I applied via Company Website and was interviewed in Jan 2022. There were 5 interview rounds.
(10 Questions)
- Q1. As for drawing work and excavation work
- Q2. Excavation proper level and drawing work
- Q3. Level and coordinate proper work
- Q4. Drawing for BBS and shuttering work
- Q5. Management rebar and shuttering
- Q6. As for drawing work and drawing proper seen
- Q7. Work in experience 3 years
- Q8. DPR and work timely and work Target
- Q9. Dailly duty and emergency work holidays
- Q10. Concrete work level and finishing work fine
- Ans.
My concrete work level is excellent and I have experience in various finishing techniques.
I have experience in pouring and leveling concrete for foundations, walls, and slabs.
I am skilled in using various finishing techniques such as troweling, stamping, and staining.
I pay close attention to detail to ensure a smooth and even finish.
I am knowledgeable in the proper curing and sealing of concrete to ensure its longevity...
(1 Question)
- Q1. Rebar and shuttering work
(1 Question)
- Q1. BBS for drwaing work
- Ans.
BBS stands for Bar Bending Schedule, which is a detailed list of reinforcement bars in a structure.
BBS is used in drawing work to ensure the correct amount of reinforcement is used in a structure.
It includes details such as bar diameter, length, shape, and placement.
BBS helps in estimating the amount of steel required for a project and also helps in cost estimation.
It is an important part of the construction process an...
(1 Question)
- Q1. Rebar and shuttering work
(2 Questions)
- Q1. Drawing for level and Finnish
- Q2. Coordinate proper and management
Interview Preparation Tips
I applied via Company Website and was interviewed in Jan 2022. There was 1 interview round.
(2 Questions)
- Q1. Reinforcement work and excavation work
- Q2. Excavation level and coordinate work
Interview Preparation Tips
- Positive thinking
- Working time mind no mistake
I applied via Naukri.com and was interviewed in Nov 2021. There was 1 interview round.
(2 Questions)
- Q1. What is impedance ,reacance
- Ans.
Impedance is the total opposition to the flow of alternating current in a circuit, while reactance is the opposition to the flow of alternating current caused by capacitance or inductance.
Impedance is a combination of resistance and reactance in a circuit.
Reactance is the opposition to the flow of alternating current caused by capacitance or inductance.
Capacitive reactance is the opposition to the flow of alternating c...
- Q2. How calculate plant load factors
- Ans.
Plant load factor is calculated by dividing the actual energy generated by the maximum possible energy that could have been generated.
Plant load factor = Actual energy generated / Maximum possible energy that could have been generated
Maximum possible energy is calculated by multiplying the rated capacity of the plant with the number of hours in a given time period
Plant load factor is expressed as a percentage
It is used...
Interview Preparation Tips
Kiran Kumar
Selected
I applied via Walk-in and was interviewed in Apr 2023. There were 3 interview rounds.
(2 Questions)
- Q1. TECHNICAL AND OTHER QUESTION
- Q2. CIVIL REALETED AND GK QUESTION
GK AND OTHER KNOWLEDGE
Interview Preparation Tips
- Civil Works
- General Administration
- Construction
(2 Questions)
- Q1. Detailed Drawing
- Q2. What is the unit weight of steel
- Ans.
The unit weight of steel is typically around 7850 kg/m^3.
The unit weight of steel is commonly used in construction and engineering to calculate the weight of steel structures.
The unit weight of steel is typically around 7850 kg/m^3, but can vary depending on the type of steel.
For example, the unit weight of stainless steel is around 7480 kg/m^3, while the unit weight of carbon steel is around 7850 kg/m^3.
(1 Question)
- Q1. Discuss about CTC
Interview Preparation Tips
Selected
I applied via Company Website and was interviewed before Apr 2023. There were 2 interview rounds.
(1 Question)
- Q1. Discuss about your total experience and current working company
- Ans.
I have over 5 years of experience as a Site Engineer, currently working with ABC Construction, focusing on residential projects.
5 years of experience in site engineering, managing various construction projects.
Currently employed at ABC Construction, overseeing residential building projects.
Successfully managed a team of 10 workers on a recent project, completing it 2 weeks ahead of schedule.
Implemented safety protocols...
(1 Question)
- Q1. Asking about transmission line and power transformer testing and other technical questions
Energy Efficiency Services Interview FAQs
Tell us how to improve this page.
Energy Efficiency Services Interviews By Designations
- Energy Efficiency Services Deputy Manager Interview Questions
- Energy Efficiency Services Electrical Project Engineer Interview Questions
- Energy Efficiency Services Zonal Lead Interview Questions
- Energy Efficiency Services Project Engineer Interview Questions
- Energy Efficiency Services Supply Chain Executive Interview Questions
- Energy Efficiency Services Deputy Corporate Strategy Manager Interview Questions
- Energy Efficiency Services Site Engineer Interview Questions
- Energy Efficiency Services Officer Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 1 interview experience
Difficulty level
Duration
Interview Questions from Similar Companies
Energy Efficiency Services Site Engineer Reviews and Ratings
based on 5 reviews
Rating in categories
|
Engineer
92
salaries
|  ₹3 L/yr - ₹6.8 L/yr |
|
Senior Engineer
61
salaries
| ₹4.1 L/yr - ₹6.8 L/yr |
|
Technical Engineer
42
salaries
| ₹4 L/yr - ₹8 L/yr |
|
Project Engineer
30
salaries
| ₹2.9 L/yr - ₹6 L/yr |
|
Deputy Manager
18
salaries
| ₹13.6 L/yr - ₹24.8 L/yr |
Adani Green Energy
ReNew
Vestas
Jakson Group
- Home >
- Interviews >
- Energy Efficiency Services Interview Questions
