AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Hitachi Astemo Rajasthan Brake Systems Diploma Trainee Engineer Interview Questions and Answers
11 Interview questions
The least count of a Vernier caliper is 0.02 mm and the least count of a micrometer is 0.01 mm.
Vernier caliper least count: 0.02 mm
Micrometer least count: 0.01 mm
Casting is a manufacturing process in which a liquid material is poured into a mold, where it solidifies into the desired shape.
Liquid material is poured into a mold
Material solidifies into desired shape
Commonly used for metal objects like engine blocks and sculptures
5s is a methodology for organizing a workplace, focusing on efficiency and effectiveness by maintaining cleanliness and order.
Sort - Separate necessary items from unnecessary ones.
Set in order - Arrange items in a logical and efficient manner.
Shine - Clean and inspect the work area regularly.
Standardize - Establish standards and procedures for maintaining the first three S's.
Sustain - Ensure the practices are cons...
Kaizen is a Japanese business philosophy of continuous improvement in processes and products.
Kaizen focuses on making small, incremental changes to improve efficiency and quality.
It involves all employees in the organization, from top management to frontline workers.
Kaizen promotes a culture of continuous learning and innovation.
Examples of kaizen include implementing 5S methodology, setting up suggestion systems,...
The principal of hydraulic brake is based on Pascal's law, which states that pressure applied to a fluid in a closed system will be transmitted equally in all directions.
Hydraulic brake system uses brake fluid to transmit pressure from the brake pedal to the brake calipers or wheel cylinders.
When the brake pedal is pressed, the brake fluid is forced through the brake lines, applying pressure to the brake pads or s...
Hydraulic brakes work by using fluid pressure to transfer force from the brake pedal to the brake pads, resulting in the vehicle slowing down or stopping.
Hydraulic brakes use brake fluid to transfer force from the brake pedal to the brake pads
When the brake pedal is pressed, the brake fluid is forced through the brake lines to the brake calipers
The brake calipers then squeeze the brake pads against the brake rotor...
Hitachi Astemo Rajasthan Brake Systems HR Interview Questions
Different types of breakers include circuit breakers, fuse breakers, and earth leakage circuit breakers.
Circuit breakers are automatic electrical switches designed to protect an electrical circuit from damage caused by overload or short circuit.
Fuse breakers use a fuse to interrupt the circuit when an overload occurs.
Earth leakage circuit breakers detect small stray voltages on the metal enclosures of electrical e...
My favorite subject is mechanical engineering.
I have always been fascinated by the principles of mechanics and how they are applied in various machines and systems.
I enjoy studying topics like thermodynamics, fluid mechanics, and machine design.
One of my favorite projects was designing and building a working model of a steam engine.
I also find the field of robotics intriguing, as it combines mechanical engineering...
Providing better quality and low cost products is our duty towards customers.
We can achieve this by optimizing our production process and reducing wastage.
We can also negotiate better deals with suppliers to reduce raw material costs.
Using technology to automate certain processes can also help reduce costs.
We should also focus on continuous improvement to ensure that our products are of the highest quality.
Offerin...
The least count is the smallest measurement that can be made using a measuring instrument.
Least count is the resolution or precision of a measuring instrument.
It determines the smallest unit of measurement that can be read on the instrument.
For a vernier caliper, the least count is the difference between one main scale division and one vernier scale division.
The formula to calculate the least count of a vernier ca...
Hitachi Astemo Rajasthan Brake Systems Diploma Trainee Engineer Interview Experiences
8 interviews found
Selected
I applied via Recruitment Consulltant and was interviewed in Jun 2024. There were 2 interview rounds.
Mathematics questions, general knowledge inquiries, and logical reasoning challenges.
(2 Questions)
- Q1. Can you please provide a self-introduction?
- Ans.
I am a recent graduate with a degree in engineering, eager to learn and contribute to the field.
Recent graduate with a degree in engineering
Passionate about learning and contributing to the field
Eager to apply theoretical knowledge in practical scenarios
- Q2. What is the least count of a Vernier caliper and a micrometer?
- Ans.
The least count of a Vernier caliper is 0.02 mm and the least count of a micrometer is 0.01 mm.
Vernier caliper least count: 0.02 mm
Micrometer least count: 0.01 mm
Selected
I applied via Walk-in
(3 Questions)
- Q1. Type of breaker?
- Ans.
Different types of breakers include circuit breakers, fuse breakers, and earth leakage circuit breakers.
Circuit breakers are automatic electrical switches designed to protect an electrical circuit from damage caused by overload or short circuit.
Fuse breakers use a fuse to interrupt the circuit when an overload occurs.
Earth leakage circuit breakers detect small stray voltages on the metal enclosures of electrical equipm...
- Q2. Hydraulic Break work?
- Ans.
Hydraulic brakes work by using fluid pressure to transfer force from the brake pedal to the brake pads, resulting in the vehicle slowing down or stopping.
Hydraulic brakes use brake fluid to transfer force from the brake pedal to the brake pads
When the brake pedal is pressed, the brake fluid is forced through the brake lines to the brake calipers
The brake calipers then squeeze the brake pads against the brake rotors, cr...
- Q3. Principal of hydraulic brake?
- Ans.
The principal of hydraulic brake is based on Pascal's law, which states that pressure applied to a fluid in a closed system will be transmitted equally in all directions.
Hydraulic brake system uses brake fluid to transmit pressure from the brake pedal to the brake calipers or wheel cylinders.
When the brake pedal is pressed, the brake fluid is forced through the brake lines, applying pressure to the brake pads or shoes,...
Interview Preparation Tips
Àrijeet Nayak
(4 Questions)
- Q1. Self introduction
- Q2. What is 5s ?
- Q3. What is kaizen?
- Q4. What is casting ?
Skills evaluated in this interview
Selected
I appeared for an interview before Mar 2024.
General questions some from maths and English current affairs
(1 Question)
- Q1. Family background and your past experience in other company
- Ans.
I come from a supportive family background and have gained valuable experience in my previous company.
My family has always been supportive of my career choices and encouraged me to pursue my goals.
I have worked at XYZ company for 2 years as a Junior Engineer, where I gained hands-on experience in project management and problem-solving.
I have also completed internships at ABC company, where I learned about the latest te...
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Dec 2022. There was 1 interview round.
(2 Questions)
- Q1. What is the least count ? Vernier caliper least count?
- Ans.
The least count is the smallest measurement that can be made using a measuring instrument.
Least count is the resolution or precision of a measuring instrument.
It determines the smallest unit of measurement that can be read on the instrument.
For a vernier caliper, the least count is the difference between one main scale division and one vernier scale division.
The formula to calculate the least count of a vernier caliper...
- Q2. What's your feverate subject?
Interview Preparation Tips
Company atmosphere superb
SONU KUMAR
I applied via Naukri.com and was interviewed in Jun 2022. There was 1 interview round.
(1 Question)
- Q1. Principle of hydrolic disc brake
- Ans.
Hydraulic disc brakes work on the principle of converting hydraulic pressure into mechanical force to stop the rotation of a disc.
Hydraulic disc brakes use a master cylinder, brake fluid, calipers, and brake pads.
When the brake pedal is pressed, it activates the master cylinder, which pressurizes the brake fluid.
The pressurized brake fluid is then sent to the calipers, which contain pistons.
The pistons in the calipers ...
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed before Dec 2021. There were 4 interview rounds.
Tecnical questions and introduction type questions was asking
Past work experience and orally tecnical questions putting in syllabus area.
(5 Questions)
- Q1. Company rules and regulations term and condition, quality management related questions asking
- Q2. To follow company rules and maintain product quality management for our costumers.
- Q3. Safty, quality management is better for w.i
- Q4. Our duty for costomers to provide a better quality and low cost price for product
- Q5. Discipline is most important for maintaining company regulation
Interview Preparation Tips
- Basic information
- Technology and tecnical informat
- Company knowledge
- New Product Introduction
- Self introduction
Maintain product quality is very important.
Company costomer are satisfied with our work its my duty
Nitish Kumar
I applied via Recruitment Consulltant and was interviewed before Mar 2021. There was 1 interview round.
(1 Question)
- Q1. Introduction and some technical question
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Recruitment Consultant and was interviewed in Nov 2019. There were 3 interview rounds.
Interview Questionnaire
4 Questions
- Q1. Qms related all questions (ISO/IATF). And how development of products in process, Processe controls
- Q2. How can improve communication and personality
- Ans.
Improving communication and personality requires self-awareness, active listening, and continuous learning.
Practice active listening to understand others' perspectives
Be aware of your own communication style and adjust as needed
Seek feedback and be open to constructive criticism
Read books or take courses on communication and interpersonal skills
Practice empathy and emotional intelligence
Be respectful and courteous in a...
- Q3. How can show your potential
- Ans.
I can demonstrate my potential through proactive problem-solving, leadership, and continuous learning in engineering projects.
Proactively identify and solve complex engineering problems, like optimizing a production process that increased efficiency by 20%.
Lead cross-functional teams in projects, such as spearheading a software development initiative that delivered a product ahead of schedule.
Engage in continuous learn...
- Q4. How can show first impressions
- Ans.
First impressions can be shown through body language, attire, and communication skills.
Body language can convey confidence or nervousness
Attire can show professionalism or lack thereof
Communication skills can demonstrate intelligence and articulation
Eye contact and a firm handshake can also make a positive impression
Senior Engineer Interview Questions & Answers
Endurance Technologies
Anonymous
posted on 23 Oct 2021
I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.
Interview Questionnaire
5 Questions
- Q1. Which vehicle license you have?
- Q2. What is CBS & ABS
- Q3. Which segment of bike you ride
- Ans.
I ride a road bike for commuting and a mountain bike for leisure.
I prefer road bikes for their speed and efficiency on paved roads.
I enjoy mountain biking for the challenge and adventure of off-road trails.
I also have experience with hybrid bikes for their versatility.
I prioritize safety and always wear a helmet and follow traffic laws.
I have participated in charity rides and group rides for fun and community.
- Q4. How you do the vehicle testing
- Ans.
Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.
Testing can include physical tests such as crash tests, durability tests, and performance tests.
Simulation and modeling can also be used to test vehicle components and systems.
Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European ...
- Q5. Which type of Homologation testing you do?
- Ans.
We conduct various types of homologation testing depending on the product and its intended market.
We conduct safety testing to ensure compliance with local regulations.
We perform emissions testing to ensure compliance with environmental regulations.
We conduct performance testing to ensure the product meets the required standards.
We also conduct durability testing to ensure the product can withstand the expected wear an...
Interview Preparation Tips
Hitachi Astemo Rajasthan Brake Systems Interview FAQs
Some of the top questions asked at the Hitachi Astemo Rajasthan Brake Systems Diploma Trainee Engineer interview -
The duration of Hitachi Astemo Rajasthan Brake Systems Diploma Trainee Engineer interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Hitachi Astemo Rajasthan Brake Systems Interviews By Designations
- Hitachi Astemo Rajasthan Brake Systems Diploma Trainee Engineer Interview Questions
- Hitachi Astemo Rajasthan Brake Systems Engineer Interview Questions
- Hitachi Astemo Rajasthan Brake Systems Quality Controller Interview Questions
- Hitachi Astemo Rajasthan Brake Systems Junior Supervisor Interview Questions
- Hitachi Astemo Rajasthan Brake Systems Quality Engineer Interview Questions
- Hitachi Astemo Rajasthan Brake Systems Assembly Supervisor Interview Questions
- Hitachi Astemo Rajasthan Brake Systems Executive Accountant Interview Questions
- Hitachi Astemo Rajasthan Brake Systems Line Leader Interview Questions
- Show more
Interview Questions for Popular Designations
- Senior Engineer Interview Questions
- Design Engineer Interview Questions
- Production Engineer Interview Questions
- Junior Engineer Interview Questions
- Service Engineer Interview Questions
- Mechanical Engineer Interview Questions
- Maintenance Engineer Interview Questions
- Graduate Engineer Interview Questions
- Show more
Overall Interview Experience Rating
based on 8 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Hitachi Astemo Rajasthan Brake Systems Diploma Trainee Engineer Reviews and Ratings
based on 59 reviews
Rating in categories
|
Diploma Trainee Engineer
144
salaries
|  ₹1.4 L/yr - ₹2.5 L/yr |
|
Supervisor
67
salaries
| ₹2 L/yr - ₹3.8 L/yr |
|
DET
58
salaries
| ₹1.5 L/yr - ₹2.5 L/yr |
|
Junior Engineer
53
salaries
| ₹2.8 L/yr - ₹4.6 L/yr |
|
Engineer
31
salaries
| ₹3.3 L/yr - ₹5.7 L/yr |
JBM Group
Subros
Varroc Group
Endurance Technologies
- Home >
- Interviews >
- Hitachi Astemo Rajasthan Brake Systems Interview Questions
