AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Monomark Engineering Interview Questions and Answers
7 Interview questions
A bearing puller is used to remove the bearing.
A bearing puller is a specialized tool designed to safely and efficiently remove bearings from their housing.
It consists of a central screw or rod that applies force to the bearing, along with arms or jaws that grip the bearing and allow it to be pulled out.
The arms or jaws of the bearing puller are adjustable to accommodate different sizes of bearings.
Some bearing pu...
There are 25.4 mm in 1 inch.
1 inch is equal to 25.4 millimeters.
The conversion factor from inches to millimeters is 25.4.
To convert inches to millimeters, multiply the number of inches by 25.4.
For example, 2 inches is equal to 50.8 millimeters (2 x 25.4).
The list count of vernier refers to the number of divisions on the vernier scale.
The list count of vernier is typically determined by the number of divisions on the vernier scale.
It is used to measure the difference between the main scale and the vernier scale.
The list count can vary depending on the precision required for the measurement.
For example, a vernier caliper may have a list count of 20 divisions on the ...
IBR recommends various measures for safe running of boilers.
Regular inspection and maintenance of the boiler
Ensuring proper water level and pressure
Using high-quality fuel and maintaining proper combustion
Regular cleaning of the boiler and its components
Following safety guidelines and procedures
Training and certification of boiler operators
Maintaining proper records and documentation
ARC stands for Adaptive Replacement Cache. It is used for efficient caching of data in computer systems.
ARC is a caching algorithm used in computer systems to improve performance.
It is designed to adapt to changing workloads and optimize cache usage.
ARC maintains two lists, one for recently used items and another for frequently used items.
It dynamically adjusts the size of each list based on the workload.
ARC is us...
The reaction of sulfur dioxide (SO2) with acids can produce various products, including sulfuric acid and other compounds.
SO2 can react with water to form sulfurous acid (H2SO3).
In the presence of oxygen, SO2 can be oxidized to form sulfur trioxide (SO3), which reacts with water to form sulfuric acid (H2SO4).
SO2 can also react with strong acids, such as hydrochloric acid (HCl), to form chlorosulfonic acid.
Example:...
Technical, legal and statutory requirements of a boiler
Technical requirements include proper installation, maintenance, and operation of the boiler
Legal requirements include obtaining necessary permits and complying with safety regulations
Statutory requirements include regular inspections and adherence to industry standards
Examples of technical requirements include proper ventilation and fuel supply
Examples of leg...
Monomark Engineering Interview Experiences
10 interviews found
Biswa Ranjan Palai
Selected
I appeared for an interview in Jun 2025, where I was asked the following questions.
- Q1. What is your knowledge regarding pipe conveyors and their safety equipment?
- Ans.
Pipe conveyors are enclosed systems for transporting bulk materials, emphasizing safety and efficiency.
Pipe conveyors consist of a series of pipes that transport materials in a closed system, reducing dust and spillage.
Safety equipment includes emergency stop buttons, belt misalignment sensors, and fire suppression systems.
Regular maintenance checks are crucial to ensure the integrity of the conveyor and its safety fea...
- Q2. What knowledge do you have about SAP, as well as the safety protocols and hazards associated with various equipment?
- Ans.
I have a solid understanding of SAP systems and safety protocols for electrical equipment, including hazard identification and risk management.
SAP (Systems, Applications, and Products) is used for managing business operations and customer relations.
Familiar with SAP modules relevant to engineering, such as SAP PM (Plant Maintenance) for equipment management.
Safety protocols include Lockout/Tagout (LOTO) procedures to e...
Anonymous
Selected
I appeared for an interview in Aug 2024.
(2 Questions)
- Q1. Transformer protection,
- Q2. Conveyor belts protection
(2 Questions)
- Q1. Motor protection
- Q2. HT/LT PANEL
(2 Questions)
- Q1. Basic Electrical
- Q2. Previous company working profile
- Ans.
I worked in a company that specialized in designing and implementing electrical systems for commercial buildings.
Designed electrical systems for commercial buildings
Implemented electrical systems according to specifications
Collaborated with architects and contractors to ensure smooth project execution
Selected
I applied via Walk-in and was interviewed in Sep 2024. There was 1 interview round.
(2 Questions)
- Q1. Plants equipment details
- Q2. SAFETY,SOP, TIMEING MENGMANT MANPOWER HANDLING,5S
Interview Preparation Tips
I appeared for an interview in May 2025, where I was asked the following questions.
- Q1. Leaching process
- Q2. Acid So2 reaction
- Ans.
The reaction of sulfur dioxide (SO2) with acids can produce various products, including sulfuric acid and other compounds.
SO2 can react with water to form sulfurous acid (H2SO3).
In the presence of oxygen, SO2 can be oxidized to form sulfur trioxide (SO3), which reacts with water to form sulfuric acid (H2SO4).
SO2 can also react with strong acids, such as hydrochloric acid (HCl), to form chlorosulfonic acid.
Example: 2 SO...
- Q3. H2O2 reaction ammonia
Ajay Kumar
Selected
I appeared for an interview before Jun 2024, where I was asked the following questions.
- Q1. What were your job responsibilities at your previous company?
- Ans.
As a Safety Officer, I ensured compliance with safety regulations and promoted a culture of safety in the workplace.
Conducted regular safety audits and inspections to identify hazards and ensure compliance with safety standards.
Developed and implemented safety training programs for employees, resulting in a 30% reduction in workplace accidents.
Investigated incidents and accidents, prepared reports, and recommended corr...
- Q2. What should you do if the company environment does not align with your preferences?
- Ans.
Adaptability is key; focus on communication, seeking solutions, and aligning goals with the company's mission.
Assess the specific aspects of the environment that are misaligned with your preferences.
Communicate openly with management about your concerns and suggestions for improvement.
Seek to understand the company's goals and values, and find ways to align your work with them.
Propose initiatives or changes that could ...
Selected
I applied via Referral and was interviewed before Oct 2023. There was 1 interview round.
(2 Questions)
- Q1. Previously working
- Ans.
Yes, I have previously worked as a software engineer for 5 years at XYZ company.
Worked as a software engineer for 5 years at XYZ company
Experience in developing web applications using Java and Angular
Collaborated with cross-functional teams to deliver projects on time
- Q2. Something about skills or knowledge you mentioned in your resume.
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed before May 2022. There were 2 interview rounds.
(3 Questions)
- Q1. Which tool is used to remove the bearing?
- Ans. Puller
- Q2. How many mm are there in 1 inch?
- Ans.
There are 25.4 mm in 1 inch.
1 inch is equal to 25.4 millimeters.
The conversion factor from inches to millimeters is 25.4.
To convert inches to millimeters, multiply the number of inches by 25.4.
For example, 2 inches is equal to 50.8 millimeters (2 x 25.4).
- Q3. What is the list count of vernier?
- Ans. 0.02mm
Interview Preparation Tips
I applied via Referral and was interviewed in Apr 2022. There was 1 interview round.
(1 Question)
- Q1. They will ask you only a single question upto how many hours you can work
Interview Preparation Tips
(2 Questions)
- Q1. What are your strengths and weaknesses?
- Q2. Tell me about yourself.
Interview Preparation Tips
Interview Questionnaire
3 Questions
- Q1. Technical , legal and statutory requirements of boiler
- Ans.
Technical, legal and statutory requirements of a boiler
Technical requirements include proper installation, maintenance, and operation of the boiler
Legal requirements include obtaining necessary permits and complying with safety regulations
Statutory requirements include regular inspections and adherence to industry standards
Examples of technical requirements include proper ventilation and fuel supply
Examples of legal re...
- Q2. IBR recommendation for safe running of boiler
- Ans.
IBR recommends various measures for safe running of boilers.
Regular inspection and maintenance of the boiler
Ensuring proper water level and pressure
Using high-quality fuel and maintaining proper combustion
Regular cleaning of the boiler and its components
Following safety guidelines and procedures
Training and certification of boiler operators
Maintaining proper records and documentation
- Q3. What is ARC, why it is used for
- Ans.
ARC stands for Adaptive Replacement Cache. It is used for efficient caching of data in computer systems.
ARC is a caching algorithm used in computer systems to improve performance.
It is designed to adapt to changing workloads and optimize cache usage.
ARC maintains two lists, one for recently used items and another for frequently used items.
It dynamically adjusts the size of each list based on the workload.
ARC is used in...
Top trending discussions
Monomark Engineering Interview FAQs
The duration of Monomark Engineering interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Monomark Engineering Interviews By Designations
- Monomark Engineering Mechanical Maintenance Fitter Interview Questions
- Monomark Engineering Safety Officer Interview Questions
- Monomark Engineering Electrical Engineer Interview Questions
- Monomark Engineering Diploma Electrical Engineer Interview Questions
- Monomark Engineering Mechanical Supervisor Interview Questions
- Monomark Engineering Site Engineer Interview Questions
- Monomark Engineering Plant Operator Interview Questions
- Monomark Engineering Process Shift Incharge Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 18 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Monomark Engineering Reviews and Ratings
based on 154 reviews
Rating in categories
|
Mechanical Engineer
35
salaries
|  ₹2.4 L/yr - ₹6 L/yr |
|
Electrical Engineer
18
salaries
| ₹2.5 L/yr - ₹6.3 L/yr |
|
Safety Officer
17
salaries
| ₹2.8 L/yr - ₹4.5 L/yr |
|
Instrument Engineer
11
salaries
| ₹3 L/yr - ₹5 L/yr |
|
HR Executive
11
salaries
| ₹2.5 L/yr - ₹3.6 L/yr |
L&T Construction
Simplex Infrastructures
L&T Energy Hydrocarbon
AECOM
- Home >
- Interviews >
- Monomark Engineering Interview Questions
