AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
SCON Projects Interview Questions and Answers
7 Interview questions
Earthing and grounding are terms used interchangeably, but they have different meanings and applications.
Earthing refers to the process of connecting electrical systems to the ground to prevent electric shock and protect against lightning strikes.
Grounding, on the other hand, involves creating a low-resistance path between an electrical circuit and the earth to ensure proper functioning and safety.
Earthing is prim...
The Single Line Diagram (SLD) shows the electrical connections from the HT panel to the meter room.
The SLD should include all the electrical components and their interconnections.
It should show the main HT panel, distribution boards, transformers, cables, and meters.
The SLD should indicate the ratings, sizes, and types of equipment used.
It should follow the electrical code and standards applicable to the project.
T...
The density of steel and cement varies depending on the type and composition.
The density of steel ranges from 7,750 to 8,050 kg/m³.
The density of cement ranges from 1,100 to 1,500 kg/m³.
Different types of steel and cement may have slightly different densities.
Density is an important property to consider in construction and engineering calculations.
Curing is done to strengthen and protect the wood, a carpenter can work efficiently depending on their skills and experience.
Curing is done to remove moisture from the wood, preventing warping and cracking.
Carpenters with experience can work faster and more efficiently due to their knowledge of different techniques and tools.
The amount of work a carpenter can do also depends on the complexity of the project and th...
Answering questions related to Planning Engineer role
Prepare a site schedule with sequencing and duration to determine project duration in MSP/on paper
Critical Path Method (CPM) is a project management technique to identify the longest path of planned activities to determine the shortest possible project duration
To identify critical path on paper, draw a network diagram and calculate the earliest start and finish ...
A work method statement outlines the procedures and steps involved in slab conduiting, plumbing pipe installation, and fire fighting pipe installation.
Slab conduiting involves the installation of conduits within the concrete slab to accommodate electrical and communication wiring.
Plumbing pipe installation includes the fitting and connection of pipes for water supply and drainage systems.
Fire fighting pipe install...
Cutting length of beam ring is the length of steel required to form a complete ring around the beam.
The cutting length of beam ring is calculated by adding the circumference of the beam to twice the development length of the steel.
The development length of the steel is the length required for the steel to fully bond with the concrete.
The cutting length of beam ring is important for determining the amount of steel ...
SCON Projects Interview Experiences
6 interviews found
I applied via Naukri.com and was interviewed in Jul 2021. There was 1 interview round.
Interview Questionnaire
6 Questions
- Q1. Building SLD FROM HT PANEL TO METER ROOM
- Ans.
The Single Line Diagram (SLD) shows the electrical connections from the HT panel to the meter room.
The SLD should include all the electrical components and their interconnections.
It should show the main HT panel, distribution boards, transformers, cables, and meters.
The SLD should indicate the ratings, sizes, and types of equipment used.
It should follow the electrical code and standards applicable to the project.
The SL...
- Q2. Transformer testing and commissioning
- Q3. Difference between earthing and grounding
- Ans.
Earthing and grounding are terms used interchangeably, but they have different meanings and applications.
Earthing refers to the process of connecting electrical systems to the ground to prevent electric shock and protect against lightning strikes.
Grounding, on the other hand, involves creating a low-resistance path between an electrical circuit and the earth to ensure proper functioning and safety.
Earthing is primarily...
- Q4. 1bhk flat Load calculation
- Q5. 1bhk ,2bhk 3bhk flat SLD
- Q6. Work method statement of slab conduiting, Plumbing pipe installation, Fire Fighting pipe installation.
- Ans.
A work method statement outlines the procedures and steps involved in slab conduiting, plumbing pipe installation, and fire fighting pipe installation.
Slab conduiting involves the installation of conduits within the concrete slab to accommodate electrical and communication wiring.
Plumbing pipe installation includes the fitting and connection of pipes for water supply and drainage systems.
Fire fighting pipe installation...
Interview Preparation Tips
Aditya Singh
Selected
I appeared for an interview in Nov 2024, where I was asked the following questions.
- Q1. What is your qualification?
- Ans.
I hold a Bachelor's degree in Civil Engineering, with a focus on structural design and project management.
Bachelor's degree in Civil Engineering from XYZ University.
Completed internships with ABC Construction Company, focusing on site management.
Participated in a capstone project designing a sustainable bridge.
Certified in AutoCAD and project management software.
- Q2. What are you doing during your practical sessions?
- Ans.
During practical sessions, I engage in hands-on activities to apply theoretical knowledge in real-world civil engineering scenarios.
Conducting site surveys to understand topography and land features.
Using surveying equipment like theodolites and total stations for accurate measurements.
Participating in concrete mix design experiments to learn about material properties.
Assisting in the construction of small-scale models...
- Q3. What is the duration of the internship?
- Ans.
The duration of an internship can vary, typically lasting from a few weeks to several months, depending on the program and organization.
Internships can range from 6 weeks to 6 months, depending on the company's requirements.
Some academic programs may require a 3-month internship as part of the curriculum.
Summer internships often last about 10-12 weeks, aligning with academic breaks.
Certain engineering firms offer year-...
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed in Sep 2023. There were 3 interview rounds.
(1 Question)
- Q1. Basic information about yourself
(1 Question)
- Q1. Asked questions regy MEP services and installation
Selected
I applied via Walk-in and was interviewed before Mar 2022. There were 4 interview rounds.
(2 Questions)
- Q1. Basic technical questions Unit conversion Grade of Steel, Cement, concrete their proportion Types of Bricks, brickwork bonds, types of plaster Activity with sequences Quantification for simple example
- Q2. Your Background, Location preference, Salary expectation
(2 Questions)
- Q1. More in depth technical questions regarding your job profile, with salary negotiation
- Q2. Prepare a small given example site schedule with sequencing and duration determine project duration in MSP/on Paper What is critical path method? How will you identify while making on paper rather than MSP...
- Ans.
Answering questions related to Planning Engineer role
Prepare a site schedule with sequencing and duration to determine project duration in MSP/on paper
Critical Path Method (CPM) is a project management technique to identify the longest path of planned activities to determine the shortest possible project duration
To identify critical path on paper, draw a network diagram and calculate the earliest start and finish times...
(1 Question)
- Q1. Final round with management in which discuss about your Goals, your expectation out of this job, location preference and final salary negotiation.
Interview Preparation Tips
- Advanced Excel
- AutoCAD
- Project Management
- Project Planning
- Project Coordination
- MS Project
- Rate Analysis
- Reconciliation
- Billing
- Cost monitoring
Be flexible about your job location preference, and slightly rigid in terms of salary expectation.
Be sure to explain your extra skills and your proficiency and feel free to express your interest in terms of which department you want to work (management is very supportive).
After joining focus on your skill development rather than salary and after you prove yourself then discuss about your salary with PM or directly with management.
Selected
I applied via Referral and was interviewed before Jul 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Salary in previous company
- Q2. Why u leave a company
(2 Questions)
- Q1. Construction related quality questions
- Q2. Why curing done, how much carpentor can do work
- Ans.
Curing is done to strengthen and protect the wood, a carpenter can work efficiently depending on their skills and experience.
Curing is done to remove moisture from the wood, preventing warping and cracking.
Carpenters with experience can work faster and more efficiently due to their knowledge of different techniques and tools.
The amount of work a carpenter can do also depends on the complexity of the project and the ava...
Interview Preparation Tips
I applied via Walk-in and was interviewed before Jul 2020. There was 1 interview round.
Interview Questionnaire
2 Questions
- Q1. What is density of steel, cement?
- Ans.
The density of steel and cement varies depending on the type and composition.
The density of steel ranges from 7,750 to 8,050 kg/m³.
The density of cement ranges from 1,100 to 1,500 kg/m³.
Different types of steel and cement may have slightly different densities.
Density is an important property to consider in construction and engineering calculations.
- Q2. Cutting length of beam ring
- Ans.
Cutting length of beam ring is the length of steel required to form a complete ring around the beam.
The cutting length of beam ring is calculated by adding the circumference of the beam to twice the development length of the steel.
The development length of the steel is the length required for the steel to fully bond with the concrete.
The cutting length of beam ring is important for determining the amount of steel requi...
Top trending discussions
Interview questions from similar companies
MEP Engineer Interview Questions & Answers
China State Construction Engineering Corporation
Anonymous
posted on 21 Mar 2021
I applied via Referral and was interviewed in Sep 2020. There were 5 interview rounds.
Interview Questionnaire
1 Question
- Q1. Introduction ,Expectation ,Able to relocate, Past experience ,Flexibility ,Determined,Long lasting
Interview Preparation Tips
Assistant Manager Interview Questions & Answers
ABCI Infrastructures
Anonymous
posted on 12 Oct 2021
Interview Questionnaire
1 Question
- Q1. Case study regarding water base plant
Interview Preparation Tips
Deputy Manager Interview Questions & Answers
VIKRAN Engineering & Exim
Anonymous
posted on 4 Sep 2021
I applied via Walk-in and was interviewed before Sep 2020. There were 3 interview rounds.
Interview Questionnaire
3 Questions
- Q1. How we define daviation of line and spotting of towers, major statuary clerance and their proposal and clearance proposals
- Ans.
Deviation of line and spotting of towers refer to the process of ensuring proper clearance for power lines and structures.
Deviation of line refers to the process of ensuring that power lines follow a safe and efficient path.
Spotting of towers involves determining the optimal location for power line towers to ensure proper clearance.
Major statutory clearance refers to the minimum distance required between power lines an...
- Q2. Where is your strengths of transmission line construction activity and why?
- Ans.
My strengths in transmission line construction activity lie in my experience in managing large-scale projects and ensuring adherence to safety standards.
Experience in managing large-scale transmission line construction projects
Expertise in ensuring adherence to safety standards and regulations
Ability to coordinate with cross-functional teams and stakeholders
Strong problem-solving and decision-making skills
Familiarity w...
- Q3. Why are you left your current employer
Interview Preparation Tips
Senior Engineer Interview Questions & Answers
Cinda Engineering & Construction
Anonymous
posted on 30 May 2025
Selected
I appeared for an interview before May 2024, where I was asked the following questions.
- Q1. Positives about you.
- Ans.
I am a proactive problem-solver with strong technical skills and a collaborative mindset, dedicated to delivering high-quality results.
Strong technical expertise: I have over 10 years of experience in software development, specializing in scalable web applications.
Proactive problem-solving: In my last project, I identified a critical performance bottleneck and implemented a solution that improved load times by 30%.
Team...
- Q2. Why we need to hire you?
- Ans.
I bring a unique blend of technical expertise, leadership skills, and a proven track record of delivering innovative solutions.
Extensive experience in software development, having led multiple successful projects that improved efficiency by over 30%.
Strong problem-solving skills demonstrated by resolving critical system issues under tight deadlines, ensuring minimal downtime.
Proven ability to mentor junior engineers, f...
SCON Projects Interview FAQs
Tell us how to improve this page.
SCON Projects Interviews By Designations
Interview Questions for Popular Designations
- Senior Executive Interview Questions
- Associate Interview Questions
- Analyst Interview Questions
- Software Developer Interview Questions
- Associate Software Engineer Interview Questions
- Graduate Engineer Trainee (Get) Interview Questions
- System Engineer Interview Questions
- Data Analyst Interview Questions
- Show more
Overall Interview Experience Rating
based on 11 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
SCON Projects Reviews and Ratings
based on 155 reviews
Rating in categories
|
Planning Engineer
35
salaries
|  ₹3 L/yr - ₹9 L/yr |
|
Safety Officer
34
salaries
| ₹1.8 L/yr - ₹4.8 L/yr |
|
Senior Engineer
22
salaries
| ₹4 L/yr - ₹7 L/yr |
|
Junior Engineer
19
salaries
| ₹1.8 L/yr - ₹4.8 L/yr |
|
Junior Engineer Civil
18
salaries
| ₹1.2 L/yr - ₹3.6 L/yr |
Lea Associates South Asia
ABCI Infrastructures
VIKRAN Engineering & Exim
The Louis Berger Group
- Home >
- Interviews >
- SCON Projects Interview Questions
