AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
Toyo
Engineering
Compare
Filter interviews by
Toyo Engineering Interview Questions and Answers
23 Interview questions
NPSH is the measure of the pressure available to prevent cavitation in a pump.
NPSH is the difference between the pressure at the pump suction and the vapor pressure of the liquid being pumped.
It is important to ensure that NPSH is greater than the NPSH required by the pump to avoid cavitation.
Factors affecting NPSH include pump design, fluid properties, and operating conditions.
NPSH can be calculated using specifi...
Pump sizing calculations involve determining the required pump flow rate, head, and power consumption based on system requirements.
Determine the required flow rate for the system
Calculate the total head required to overcome system resistance
Select a pump that can deliver the required flow rate at the calculated head
Calculate the power consumption of the selected pump
Consider factors such as efficiency, NPSH, and s...
Line sizing criteria include flow rate, pressure drop, velocity, material compatibility, and safety factors.
Flow rate: Determine the maximum flow rate the line needs to handle.
Pressure drop: Calculate the pressure drop along the line to ensure proper operation.
Velocity: Select a velocity range to prevent erosion or excessive noise.
Material compatibility: Choose materials that are compatible with the process fluid.
...
Seeking new challenges and opportunities for growth in a different environment.
Desire for new challenges and opportunities
Seeking professional growth and development
Interest in exploring different work environment
I have 5 years of experience working in the oil and gas industry, specifically in process engineering roles.
Designed and optimized processes for oil and gas production
Implemented safety measures to ensure compliance with industry regulations
Worked on projects involving refining, transportation, and storage of oil and gas
Collaborated with cross-functional teams to improve efficiency and reduce costs
Experienced Project Planning Engineer skilled in managing timelines, resources, and budgets for successful project delivery.
Over 5 years of experience in project planning and management.
Proficient in using project management software like MS Project and Primavera.
Strong analytical skills to assess project risks and develop mitigation strategies.
Experience in coordinating with cross-functional teams to ensure proje...
Toyo Engineering HR Interview Questions
SFRA test is a diagnostic test performed on power transformers to assess their mechanical and electrical integrity.
SFRA stands for Sweep Frequency Response Analysis.
It is a non-intrusive test that measures the frequency response of a transformer to a swept sinusoidal input signal.
The test helps in identifying mechanical and electrical faults in the transformer windings.
SFRA test results can be compared with baseli...
Yes, I have experience using E3D software for designing and modeling mechanical components.
I have used E3D software extensively during my internship at XYZ Engineering firm
I have created 3D models of various mechanical components using E3D software
I am familiar with the features and tools of E3D software for efficient design and analysis
Boring enlarges existing holes while reaming improves the surface finish and accuracy of holes.
Boring is used to enlarge existing holes to a specific diameter, while reaming is used to improve the surface finish and accuracy of holes.
Boring is typically done before reaming in the machining process.
Boring is usually done using a single-point cutting tool, while reaming is done using a multi-edge cutting tool.
Exampl...
The load taken by a single weld tick depends on various factors such as the type of weld, material being welded, and welding technique.
The load taken by a single weld tick can vary depending on the type of weld being used (e.g. fillet weld, groove weld, plug weld).
The material being welded also plays a significant role in determining the load capacity of a single weld tick.
The welding technique and quality of the ...
Toyo Engineering Interview Experiences
54 interviews found
Anonymous
Selected
I appeared for an interview in Nov 2024.
(2 Questions)
- Q1. How many experience in army?
- Ans.
I have 5 years of experience in the army.
Served in the army for 5 years
Received training in various military operations
Developed leadership and organizational skills
Worked in a team-oriented environment
- Q2. How much knowledge do you have in politic ?
- Ans.
I have a good understanding of politics and stay updated on current events and policies.
I have a degree in Political Science which has provided me with a strong foundation in political theory and governance.
I actively follow political news and developments, both domestically and internationally.
I have experience working in government offices where I had to navigate political processes and policies.
I have participated i...
Selected
I appeared for an interview in Aug 2024.
(3 Questions)
- Q1. What are the criteria for line sizing?
- Ans.
Line sizing criteria include flow rate, pressure drop, velocity, material compatibility, and safety factors.
Flow rate: Determine the maximum flow rate the line needs to handle.
Pressure drop: Calculate the pressure drop along the line to ensure proper operation.
Velocity: Select a velocity range to prevent erosion or excessive noise.
Material compatibility: Choose materials that are compatible with the process fluid.
Safet...
- Q2. What are the steps involved in pump sizing calculations?
- Ans.
Pump sizing calculations involve determining the required pump flow rate, head, and power consumption based on system requirements.
Determine the required flow rate for the system
Calculate the total head required to overcome system resistance
Select a pump that can deliver the required flow rate at the calculated head
Calculate the power consumption of the selected pump
Consider factors such as efficiency, NPSH, and safety...
- Q3. What is the definition of Net Positive Suction Head (NPSH)?
- Ans.
NPSH is the measure of the pressure available to prevent cavitation in a pump.
NPSH is the difference between the pressure at the pump suction and the vapor pressure of the liquid being pumped.
It is important to ensure that NPSH is greater than the NPSH required by the pump to avoid cavitation.
Factors affecting NPSH include pump design, fluid properties, and operating conditions.
NPSH can be calculated using specific for...
(2 Questions)
- Q1. What is your current salary
- Q2. Why do you want to join Toyo?
- Ans.
I want to join Toyo because of its reputation for innovation and commitment to excellence in the field of engineering.
Toyo has a strong reputation for innovation and cutting-edge technology
I am impressed by Toyo's commitment to excellence and continuous improvement
I believe that working at Toyo will provide me with valuable opportunities for professional growth and development
I applied via Naukri.com and was interviewed in May 2024. There were 3 interview rounds.
(3 Questions)
- Q1. Personal introduction with work experience
- Q2. Sharing experience facing and resolving issues at workplace
- Q3. Reason of leaving previous job
(1 Question)
- Q1. Paragraph was given to type to check the speed and accuracy of typing words
Work experience
Reason of leaving job
How do you came to know about this recruitment and any reference from this company
Any third languaged known
Explained about the company policy and requirements they are looking for candidates
Interview Preparation Tips
- Know your job role and prepare
Prepare for Interviews: Research the company and questions.
Optimize Online Presence: Update LinkedIn and clean up social media.
Stay Organized: Track applications and deadlines.
Enhance Skills: Take courses and stay updated on industry trends.
Be Persistent: Keep applying and learn from rejections.
Follow Up: Send thank-you emails and follow up politely.
Be Open to Different Roles: Consider full-time, part-time, freelance, and temp jobs.
Assess Company Culture: Ensure it aligns with your values and goals.
Prepare to Negotiate: Know your worth and be ready to discuss salary.
RAMIQBAL KUSHAWAHA
Selected
I applied via Referral and was interviewed in Jun 2024. There was 1 interview round.
(5 Questions)
- Q1. API 620 description
- Q2. Welder qualification
- Q3. About code and standards
- Q4. Weldbility of steel
- Q5. Chemical composition of material
(1 Question)
- Q1. Overall experience?
(2 Questions)
- Q1. Basic day to day activities
- Q2. Questions related to OSPF , Routing and Switching,firewall.
Selected
I applied via Naukri.com and was interviewed in May 2024. There was 1 interview round.
(2 Questions)
- Q1. From civil IS CODES
- Q2. About steel reinforcements, bbs,various tests
I applied via Naukri.com and was interviewed in Sep 2023. There were 3 interview rounds.
1) It is a home based online Aptitude Test.
2) The entire duration of the Aptitude Test is one hour forty minutes.
3) Out of one hour forty minutes, first fifty minutes are allocated to the General Aptitude Test which consists of very basic but time consuming mathematical sums, logical reasoning and grammar/vocabulary questions.
4) Once fifty minutes pass, the General Aptitude Test automatically closes and the Technical Aptitude Test begins.
5) The Technical Aptitude Test consists of topics primarily related to Mechanical Engineering concepts such as Strength of Materials, Thermodynamics, Fluid Mechanics, Engineering Mechanics, Thermal Engineering.
6) Most of the questions asked in the Technical Aptitude were straight forward theoretical questions.
7) Both the General and Technical Aptitude tests have multiple choice questions and no negative marking.
(5 Questions)
- Q1. In the Technical Interview Round, the interviewers were mainly talking and asking questions regarding the skills I had mentioned in my CV and work experience from my internship.
- Q2. What is the difference between boring and reaming?
- Ans.
Boring enlarges existing holes while reaming improves the surface finish and accuracy of holes.
Boring is used to enlarge existing holes to a specific diameter, while reaming is used to improve the surface finish and accuracy of holes.
Boring is typically done before reaming in the machining process.
Boring is usually done using a single-point cutting tool, while reaming is done using a multi-edge cutting tool.
Examples: B...
- Q3. Do you have any prior experience in using E3D software?
- Ans.
Yes, I have experience using E3D software for designing and modeling mechanical components.
I have used E3D software extensively during my internship at XYZ Engineering firm
I have created 3D models of various mechanical components using E3D software
I am familiar with the features and tools of E3D software for efficient design and analysis
- Q4. What was your final year project?
- Q5. Where do you see yourself in next 5 years?
Interview Preparation Tips
- Aveva E3D
- SP3D
- About the company
- Piping
- Piping Design
2) Try to attempt straight forward theoretical questions first both in case of General as well as Technical Aptitude Test since you have to solve 50 questions in 50 minutes i.e. one minute per question.
3) Reply to the questions in the interview with confidence.
4) Try to keep your answers short and easy to understand.
5) In my case, after the Technical Interview I didn't hear back anything from the company later. I had also sent a follow-up e-mail regarding my application status to which I never received any reply. So keeping going on applying to other companies as well and never stop after applying to only one company.
Selected
Basic scenario based questions
Selected
I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.
(2 Questions)
- Q1. Salary negociant
- Q2. Notice period negociant
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.
(1 Question)
- Q1. Said one pump system to rack piping Draw hand sketch
Interview Preparation Tips
Finally it's a parliament house.
Top trending discussions
Toyo Engineering Interview FAQs
The duration of Toyo Engineering interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Toyo Engineering Interviews By Designations
- Toyo Engineering Process Engineer Interview Questions
- Toyo Engineering Piping Engineer Interview Questions
- Toyo Engineering Structural Engineer Interview Questions
- Toyo Engineering QA QC Engineer Interview Questions
- Toyo Engineering Engineer Interview Questions
- Toyo Engineering Senior Engineer Interview Questions
- Toyo Engineering Safety Officer Interview Questions
- Toyo Engineering Project Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Process Engineer Interview Questions
- Software Engineer Interview Questions
- Sales Executive Interview Questions
- Senior Engineer Interview Questions
- Consultant Interview Questions
- Associate Software Engineer Interview Questions
- Accountant Interview Questions
- System Engineer Interview Questions
- Show more
Overall Interview Experience Rating
based on 57 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Toyo Engineering Reviews and Ratings
based on 681 reviews
Rating in categories
|
Piping Engineer
113
salaries
|  ₹6 L/yr - ₹14.1 L/yr |
|
Project Engineer
95
salaries
| ₹6.3 L/yr - ₹16.4 L/yr |
|
Senior Engineer
92
salaries
| ₹17.7 L/yr - ₹32 L/yr |
|
Senior Assistant Engineer
86
salaries
| ₹7.6 L/yr - ₹13.5 L/yr |
|
Assistant Engineer
82
salaries
| ₹6 L/yr - ₹13 L/yr |
L&T Energy Hydrocarbon
AECOM
Sterling & Wilson
Apco Infratech
- Home >
- Interviews >
- Toyo Engineering Interview Questions
