AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
LMW Textile Machinery Division Interview Questions and Answers
6 Interview questions
Designing a shaft involves determining the material, dimensions, and manufacturing process to ensure strength and durability.
Consider the material properties such as strength, stiffness, and corrosion resistance.
Calculate the required dimensions based on the load, speed, and operating conditions.
Select the appropriate manufacturing process such as machining or forging.
Ensure proper alignment and support to prevent...
Stress-strain curve shows the relationship between stress and strain in a material.
The curve has three regions: elastic, plastic, and fracture.
Elastic region shows linear relationship between stress and strain.
Plastic region shows non-linear relationship between stress and strain.
Fracture region shows the point at which the material breaks.
The slope of the curve in the elastic region is called Young's modulus.
The ...
Gears are mechanical components used to transmit motion and power between rotating shafts.
Gears have teeth that mesh together to transmit motion
They can change the speed, torque, and direction of rotation
Common types include spur gears, helical gears, and bevel gears
Gears are often used in machinery such as cars, bicycles, and industrial equipment
Pressure is force applied over an area, while load is the weight supported by a structure or material.
Pressure is force applied perpendicular to a surface, measured in units like psi or Pa.
Load is the weight supported by a structure or material, measured in units like pounds or newtons.
Pressure can cause deformation or stress in a material, while load determines the strength needed to support it.
Examples: A hydrau...
Stress Strain diagram shows the relationship between stress and strain in a material.
Shows how a material deforms under stress
Helps determine material properties like yield strength and modulus of elasticity
Can be used to compare different materials' behavior under load
A beam is a structural element that carries load primarily in bending. Types include cantilever, simply supported, fixed, and continuous beams.
Beams are horizontal or inclined structural members that support loads applied perpendicular to their longitudinal axis.
Types of beams include cantilever beams (supported at one end), simply supported beams (supported at both ends), fixed beams (supported at both ends with ...
LMW Textile Machinery Division Interview Experiences
5 interviews found
Anonymous
(2 Questions)
- Q1. How to design a Shaft.
- Ans.
Designing a shaft involves determining the material, dimensions, and manufacturing process to ensure strength and durability.
Consider the material properties such as strength, stiffness, and corrosion resistance.
Calculate the required dimensions based on the load, speed, and operating conditions.
Select the appropriate manufacturing process such as machining or forging.
Ensure proper alignment and support to prevent bend...
- Q2. Explain about gears
- Ans.
Gears are mechanical components used to transmit motion and power between rotating shafts.
Gears have teeth that mesh together to transmit motion
They can change the speed, torque, and direction of rotation
Common types include spur gears, helical gears, and bevel gears
Gears are often used in machinery such as cars, bicycles, and industrial equipment
(2 Questions)
- Q1. Expected salary
- Ans.
I expect a salary that reflects my experience, skills, and the industry standards for a Senior Design Engineer.
Based on my research, the average salary for a Senior Design Engineer in this region is between $90,000 and $120,000.
I have over 10 years of experience in design engineering, which positions me at the higher end of that range.
My expertise in advanced CAD software and project management adds significant value t...
- Q2. What is your Current salary
- Ans.
My current salary reflects my experience and contributions in design engineering, aligning with industry standards.
My current salary is $X, which is competitive for my level of expertise.
I have consistently taken on additional responsibilities, such as leading projects that increased efficiency by 20%.
In my previous role, I successfully designed a product that generated $Y in revenue, showcasing my value to the company...
Selected
I applied via Walk-in and was interviewed before Feb 2023. There were 2 interview rounds.
(3 Questions)
- Q1. Stress Strain diagram
- Ans.
Stress Strain diagram shows the relationship between stress and strain in a material.
Shows how a material deforms under stress
Helps determine material properties like yield strength and modulus of elasticity
Can be used to compare different materials' behavior under load
- Q2. Pressure vs load
- Ans.
Pressure is force applied over an area, while load is the weight supported by a structure or material.
Pressure is force applied perpendicular to a surface, measured in units like psi or Pa.
Load is the weight supported by a structure or material, measured in units like pounds or newtons.
Pressure can cause deformation or stress in a material, while load determines the strength needed to support it.
Examples: A hydraulic p...
- Q3. What is Bearing
- Ans.
A bearing is a machine element that allows one part to bear another part's load while reducing friction between the two parts.
Bearing helps in reducing friction between moving parts
They support radial and axial loads
Common types include ball bearings, roller bearings, and plain bearings
(2 Questions)
- Q1. Beam and its types
- Ans.
A beam is a structural element that carries load primarily in bending. Types include cantilever, simply supported, fixed, and continuous beams.
Beams are horizontal or inclined structural members that support loads applied perpendicular to their longitudinal axis.
Types of beams include cantilever beams (supported at one end), simply supported beams (supported at both ends), fixed beams (supported at both ends with addit...
- Q2. Deflection calculation
Interview Preparation Tips
I applied via Walk-in and was interviewed before Oct 2021. There were 4 interview rounds.
It was a aptitude + technical MCQ round
Just to test your communication. In our batch everyone were selected for the final round.
(3 Questions)
- Q1. Questions were raised from the project that I was carrying out during my master's
- Q2. Stress strain curve was asked to draw
- Ans.
Stress-strain curve shows the relationship between stress and strain in a material.
The curve has three regions: elastic, plastic, and fracture.
Elastic region shows linear relationship between stress and strain.
Plastic region shows non-linear relationship between stress and strain.
Fracture region shows the point at which the material breaks.
The slope of the curve in the elastic region is called Young's modulus.
The area ...
- Q3. More basic and questions related to my project were asked
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed before Mar 2022. There were 3 interview rounds.
Online test with technical and analytical
(2 Questions)
- Q1. Expected salary and where do we live
- Q2. Willing to switch over to Coimbatore
- Ans.
Yes, I am willing to switch over to Coimbatore.
I am open to new opportunities and challenges.
I have researched about Coimbatore and I am excited to explore the city.
I am willing to relocate and adapt to the new environment.
I have discussed with my family and they are supportive of my decision.
I believe this opportunity will help me grow both professionally and personally.
Interview Preparation Tips
I applied via Campus Placement and was interviewed before Oct 2020. There were 2 interview rounds.
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Referral and was interviewed before Aug 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. My profile was related to SAP finance and data migration. So the questions regarding same area were asked
Interview Preparation Tips
I applied via Recruitment Consultant and was interviewed before Apr 2020. There were 5 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Just started myself introduction.
- Q2. Inform about myself and nothing so much they asked.
Interview Preparation Tips
I applied via Company Website and was interviewed in Feb 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Power Transmission & distribution
Interview Preparation Tips
I applied via Recruitment Consultant and was interviewed before Apr 2020. There was 1 interview round.
Interview Questionnaire
4 Questions
- Q1. How will you sale website
- Q2. How will you generate daily revenue for company
- Ans.
I will generate daily revenue for the company by implementing effective sales strategies and motivating my team to achieve their targets.
Developing a sales plan and setting achievable targets
Identifying potential customers and reaching out to them through various channels
Providing excellent customer service to retain existing customers and generate referrals
Motivating and training team members to improve their sales sk...
- Q3. How will you handle tough time or sales pressure
- Ans.
I approach tough times with resilience, strategic planning, and team collaboration to navigate sales pressure effectively.
Maintain a positive mindset: I remind my team that challenges are opportunities for growth. For example, during a sales slump, I encouraged brainstorming sessions to identify new strategies.
Set clear goals: I break down larger targets into manageable milestones, making it easier for the team to stay...
- Q4. How will you handle Target
Interview Preparation Tips
Interview Questionnaire
8 Questions
- Q1. A nimbu paani wala spends all of his daily income on his daily expenditure except only as much as would enable him to conduct equal business on the next day. He now wants to aim at starting to save for the...
- Ans.
Advise the nimbu paani wala on how to start saving for the future.
Encourage him to set a savings goal and create a budget to achieve it.
Suggest he start small by saving a small percentage of his daily income.
Recommend he explore investment options to grow his savings over time.
Remind him to continue setting aside enough money for his daily expenses.
Provide resources or education on financial literacy to help him make i...
- Q2. An IT sector multinational wants to expand its business into more countries. Suggest a strategy. This was the question given in the VC round by the Partner. It was followed by a lot of numerical and qualit...
- Ans.
To expand into more countries, the IT sector multinational can adopt a market entry strategy that includes market research, partnerships, localization, and scalability.
Conduct thorough market research to identify potential countries for expansion
Establish strategic partnerships with local companies to leverage their knowledge and networks
Adapt products and services to meet the specific needs and preferences of each tar...
- Q3. An IT sector company wants to increase the number of BPOs in India. Devise a metric that will help it rank cities according to their favourability to host this BPO
- Ans.
A metric to rank Indian cities for BPOs
Consider factors like availability of skilled workforce, infrastructure, cost of living, and government policies
Weight each factor based on its importance to the company
Collect data on each factor for different cities and assign scores
Rank cities based on their total score
Examples of factors: number of universities, quality of transportation, cost of office space, tax incentives
Re...
- Q4. The supply chain head in an auto company in India is frustrated about manufacturing stopping frequently because of parts not being readily available at the assembly line and comes to you for help. What cou...
- Ans.
The probable reasons for manufacturing stoppages due to parts unavailability in an auto company in India and suggested solutions.
Probable reasons: supply chain disruptions, inventory management issues, quality control problems, lack of communication with suppliers
Investigate by analyzing historical data, conducting supplier audits, implementing real-time tracking systems
Solutions: improve forecasting accuracy, establis...
- Q5. How many airplanes are flying in the Indian sky at the moment?
- Ans.
The exact number of airplanes flying in the Indian sky at the moment is not available.
The number of airplanes flying in the Indian sky changes constantly.
It depends on factors such as time of day, weather conditions, and airline schedules.
However, on average, there are around 2,000 flights in the Indian airspace at any given time.
This number includes both domestic and international flights.
The Indian aviation industry ...
- Q6. How many years will it take the Delhi Metro to break even?
- Ans.
The Delhi Metro is expected to break even in 2025.
The Delhi Metro has been expanding rapidly and has seen a steady increase in ridership.
The metro has been able to generate revenue through advertising and property development.
The government has also provided financial support to the metro.
Based on current projections, the Delhi Metro is expected to break even in 2025.
- Q7. Why not MBA?
- Q8. Interview-4
Interview Preparation Tips
Experience: The interviewer also said: "It seems like you are more interested in finance and BCG is only the second option. We don’t like being the second option." All these questions required some delicate handling.
Round: Interview
Experience: This was a sort of stress interview because the interviewer seemed disinterested and dissatisfied with everything i said and kept on demanding for more while impressing that whatever I am coming up with was really of no significance.
Tips: What worked in my favor was I dint get flustered by his attitude, kept smiling and working at the problem objectively. When I would come to the end of one line of thinking and would have no more answers to his “What next” I would frankly tell him that and ask him in return for more suggestions. It resulted in him complimenting my way of thinking at the end and saying that I was one of the best and most practical candidates that he had interviewed that day.
Round: Interview
Experience: 1. Both the above questions were the part of one interview.
2. The interviewer didn't want me to solve the case fully in either instance. He just wanted to see my structure and evaluate my thinking process.
Round: Interview
Experience: Almost all my interviews went well with BCG except the last VC one, because by then I was complete drained out and could hardly think. I also did some minor silly mistakes in a couple of the smaller cases while dealing with numbers, but otherwise everyone seemed to appreciate my structuring of the cases. Some of the interviewers also delved into the HR side frequently.
College Name: IIT KANPUR
LMW Textile Machinery Division Interview FAQs
Tell us how to improve this page.
LMW Textile Machinery Division Interviews By Designations
- LMW Textile Machinery Division Senior Engineer Interview Questions
- LMW Textile Machinery Division Design Engineer Interview Questions
- LMW Textile Machinery Division Senior Design Engineer Interview Questions
- LMW Textile Machinery Division Post Graduate Engineer Trainee [pget] Interview Questions
- LMW Textile Machinery Division Deputy Manager Interview Questions
Interview Questions for Popular Designations
- Senior Executive Interview Questions
- Associate Interview Questions
- Analyst Interview Questions
- Software Engineer Interview Questions
- Software Developer Interview Questions
- Senior Engineer Interview Questions
- Associate Software Engineer Interview Questions
- Senior Software Engineer Interview Questions
- Show more
Overall Interview Experience Rating
based on 4 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
LMW Textile Machinery Division Reviews and Ratings
based on 26 reviews
Rating in categories
|
Senior Engineer
7
salaries
|  ₹5 L/yr - ₹9 L/yr |
|
Design Engineer
6
salaries
| ₹5.7 L/yr - ₹5.8 L/yr |
|
QA Engineer
5
salaries
| ₹1.5 L/yr - ₹3 L/yr |
|
Assistant Manager
4
salaries
| ₹10 L/yr - ₹12 L/yr |
|
Engineer
3
salaries
| ₹4 L/yr - ₹6.2 L/yr |
BYJU'S
Vodafone Idea
Tata Projects
Indiamart Intermesh
- Home >
- Interviews >
- LMW Textile Machinery Division Interview Questions
